Wraps by car

Ferrari Monza SP1 wrap

A Ferrari Monza SP1 wrap is a color change or paint protection vinyl wrap for the one-door speedster. The car in this catalog is the Ferrari Monza SP1, built from 2019 to the present. This catalog covers one generation of the Monza SP1 body. A full wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

1generations13.5 mof film for a full wrap

Ferrari Monza SP1, first generation, factory photo
Ferrari Monza SP1, first generation. Factory color shown.

Ferrari Monza SP1 wrap colors and ideas

  • Monza SP1 black wrap
  • Monza SP1 white wrap
  • Monza SP1 gray wrap
  • Monza SP1 silver wrap
  • Monza SP1 red wrap
  • Monza SP1 blue wrap
  • Monza SP1 green wrap
  • Monza SP1 yellow wrap
  • Monza SP1 orange wrap
  • Monza SP1 purple wrap
  • Monza SP1 pink wrap
  • Monza SP1 teal wrap
  • Monza SP1 brown wrap
  • Monza SP1 gold wrap
  • Monza SP1 chrome wrap
  • Monza SP1 color shift wrap
  • Monza SP1 carbon fiber wrap
  • Monza SP1 camo and patterned wrap

How much vinyl to wrap a Ferrari Monza SP1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowconvertible (1 doors)183.3 in (4,657 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Monza SP1 wrap cost factors

The Monza SP1 wrap cost depends on the film type, the shop's labor rate, and the surface area of the car. The car is 183.3 in (4,657 mm) long and has one door, which affects the amount of film and the time for cutting and finishing. A standard color change uses about 44 ft (13.5 m) of cast film, while chrome or patterned film uses about 52 ft (16 m). The number of cut edges around the open cockpit and the windshield frame also adds to the labor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (1 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Monza SP1 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Monza SP1, first generation, factory photo
Factory color shown

2019–now Monza SP1 convertible (first generation)

2019–nowconvertible (1 doors)183.3 in (4,657 mm)

The first generation Ferrari Monza SP1 is an open-top convertible with one door. In a wrap, the open top means there is no roof panel to cover, so the film ends where the painted body meets the cockpit opening. The installer wraps the exterior panels and stops the film cleanly at the edge of the cockpit rim. The windshield frame is wrapped as its own piece, and the edges are tucked or trimmed at the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Monza SP1

A partial wrap on a Ferrari Monza SP1 can cover the hood, mirror caps, or rear deck. A chrome delete is another option, where bright trim and badges are covered with black film. For a Monza SP1, the chrome delete often includes the window trim and the badges. Paint protection film (PPF) is also available as a clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari Monza SP1: body, cut-outs and film

The Ferrari Monza SP1 vinyl wrap covers a convertible body with one door. The car is a low, open speedster with no roof, so the film area is smaller than a closed coupe. The body length is 183.3 in (4,657 mm), and the one-door layout means fewer door gaps to work around. A wrap installer can lay large sections over the hood and rear deck with fewer seams.

Monza SP1 wrap ideas start with the open cockpit and the barchetta-style body. The convertible body has no fabric top, so the film ends where the painted body ends at the cockpit edges. There is no roof to wrap, and the windshield frame can be wrapped as a separate piece. The large hood and the rear deck are the main panels for a color change.

How much vinyl to wrap a Monza SP1 depends on the generation, and this catalog lists one generation. The first generation runs from 2019 to now and is the only body style. A color change wrap for this generation uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 52 ft (16 m).

Questions about wrapping a Ferrari Monza SP1

How much vinyl does it take to wrap a Ferrari Monza SP1?

A Ferrari Monza SP1 takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the newest body, which is the first generation built from 2019 to now. If you choose chrome or patterned film, the estimate rises to about 52 ft (16 m). The amount is based on the car's length of 183.3 in (4,657 mm) and its one-door convertible shape.

Is the top of a Monza SP1 wrapped?

No, the top of a Monza SP1 is not wrapped because the car has no top at all. The Monza SP1 is a speedster with an open cockpit, so there is no fabric or folding panel to apply film to. The wrap film ends where the painted body ends at the cockpit edge. Only the exterior body panels and the windshield frame are wrapped.

Can I wrap only the hood or the roof of a Monza SP1?

Yes, you can wrap only the hood or the roof of a Monza SP1, but note that the Monza SP1 has no roof. The partial wrap options for this car include the hood, mirror caps, and rear deck. A hood-only wrap is a common choice for a color accent or protection. The rear deck can also be wrapped on its own.

Is a Monza SP1 hard to wrap?

Yes, a Monza SP1 is somewhat hard to wrap because of its open cockpit and large curved panels. The car has no roof, so the film must be cut and tucked cleanly at the cockpit edges, which takes extra time. The long hood and rear deck are large single pieces that require careful stretching to avoid wrinkles. The one-door design means fewer gaps, but the windshield frame and the area behind the seats add intricate cuts.