Wraps by car

Ferrari Portofino wrap

The Ferrari Portofino wrap guide covers the one generation built from 2017 to the present. A full vinyl wrap of the convertible body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The page explains body styles, film needs, cost factors, and partial wrap options.

1generations15 mof film for a full wrap

Ferrari Portofino, first generation, factory photo
Ferrari Portofino, first generation. Factory color shown.

Ferrari Portofino wrap colors and ideas

  • Portofino black wrap
  • Portofino white wrap
  • Portofino gray wrap
  • Portofino silver wrap
  • Portofino red wrap
  • Portofino blue wrap
  • Portofino green wrap
  • Portofino yellow wrap
  • Portofino orange wrap
  • Portofino purple wrap
  • Portofino pink wrap
  • Portofino teal wrap
  • Portofino brown wrap
  • Portofino gold wrap
  • Portofino chrome wrap
  • Portofino color shift wrap
  • Portofino carbon fiber wrap
  • Portofino camo and patterned wrap

How much vinyl to wrap a Ferrari Portofino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowconvertible (2 doors)180.6 in (4,586 mm) to 180.9 in (4,594 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Portofino wrap cost factors

Portofino wrap cost depends mainly on how much film is used and how many parts need extra time. The car needs about 49 ft (15 m) of cast film, or about 56 ft (17 m) with chrome or patterned film. Cut-outs for parking sensors and careful work around the convertible top add labor, while partial jobs use less material.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Portofino wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Portofino, first generation, factory photo
Factory color shown

2017–now Portofino convertible (first generation)

2017–nowconvertible (2 doors)180.6 in (4,586 mm) to 180.9 in (4,594 mm)

The first generation Ferrari Portofino has an open top that is not wrapped because the roof is fabric. The film ends exactly where the fabric begins, along the edges of the windshield header and rear deck. The convertible top is left untouched, and the installer works around its seals.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Portofino

A partial wrap on the Portofino can cover the hood, mirror caps, or rear deck without changing the whole car. A Portofino chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is another option: clear film on the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari Portofino: body, cut-outs and film

A Ferrari Portofino vinyl wrap has to follow the lines of a 2-door convertible that measures 180.6 in (4,586 mm) to 180.9 in (4,594 mm). The body has long doors and a rear deck that is one large panel, so installers need wide film and careful stretching. Because the car is a convertible, the wrap ends where the fabric top begins, which keeps the job straightforward.

Portofino wrap ideas start with the bumpers and the areas around the lights and grilles, which need cut-outs for a clean finish. Some trims have parking sensors in the bumpers, and the film is cut around each sensor so the system works as before. Door handles and badges are removed for a smooth result, and the mirror caps are wrapped off the car when possible.

If you want to know how much vinyl to wrap a Portofino, remember that all cars in the catalog share the same body style and dimensions. The body was restyled in 2020 but kept the same overall size, so the film estimate of about 49 ft (15 m) applies to every year. A chrome or patterned film adds more material because the pattern must be matched, bringing the total to about 56 ft (17 m).

Questions about wrapping a Ferrari Portofino

How much vinyl does it take to wrap a Ferrari Portofino?

A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the amount is about 56 ft (17 m) because the pattern must be matched. These figures are for the current Portofino body, which has not changed in size since 2017.

Is the top of a Portofino wrapped?

No, the top of a Portofino is not wrapped. The convertible has a fabric roof, and vinyl film does not stick to fabric. The wrap ends where the roof begins, at the edges of the body panels.

Which years of the Portofino take the same film cuts?

All years of the Portofino from 2017 to the present take the same film cuts. The body was restyled in 2020, but the overall shape and dimensions stayed the same. For wrapping, the panels are identical across every year.

Can I wrap only the hood or the roof of a Portofino?

Yes, you can wrap only the hood or the roof of a Portofino. Partial wrap jobs often include the hood, mirror caps, or rear deck. A chrome delete covers the window trim and badges, and paint protection film can be applied to the front end alone.