Wraps by car

Ferrari GTC4 Lusso wrap

This page covers the Ferrari GTC4 Lusso wrap in vinyl wrap terms. The car was made in one generation from 2016 to 2021. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) if you choose chrome or patterned film.

1generations17.5 mof film for a full wrap

Ferrari GTC4 Lusso, first generation, factory photo
Ferrari GTC4 Lusso, first generation. Factory color shown.

Ferrari GTC4 Lusso wrap colors and ideas

  • GTC4 Lusso black wrap
  • GTC4 Lusso white wrap
  • GTC4 Lusso gray wrap
  • GTC4 Lusso silver wrap
  • GTC4 Lusso red wrap
  • GTC4 Lusso blue wrap
  • GTC4 Lusso green wrap
  • GTC4 Lusso yellow wrap
  • GTC4 Lusso orange wrap
  • GTC4 Lusso purple wrap
  • GTC4 Lusso pink wrap
  • GTC4 Lusso teal wrap
  • GTC4 Lusso brown wrap
  • GTC4 Lusso gold wrap
  • GTC4 Lusso chrome wrap
  • GTC4 Lusso color shift wrap
  • GTC4 Lusso carbon fiber wrap
  • GTC4 Lusso camo and patterned wrap

How much vinyl to wrap a Ferrari GTC4 Lusso

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2021hatchback (3 doors)193.8 in (4,922 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

GTC4 Lusso wrap cost factors

GTC4 Lusso wrap cost depends on the film type, the condition of the paint, and the time to cut around sensors and cameras. The car is 193.8 in (4,922 mm) long, which means a full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 76 ft (23 m).

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

GTC4 Lusso wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari GTC4 Lusso, first generation, factory photo
Factory color shown

2016–2021 GTC4 Lusso hatchback (first generation)

2016–2021hatchback (3 doors)193.8 in (4,922 mm)

The first generation of the Ferrari GTC4 Lusso is a hatchback with three doors and a length of 193.8 in (4,922 mm). A full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) for chrome or patterned film. The two long side doors are each one large piece of film, which keeps the panel count low.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a GTC4 Lusso

For a GTC4 Lusso, a partial wrap can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari GTC4 Lusso: body, cut-outs and film

The Ferrari GTC4 Lusso vinyl wrap is shaped by its hatchback body with three doors and a length of 193.8 in (4,922 mm). This body style means the tailgate and two long side doors are the main panels. Each side door is one large piece of film, so a full wrap uses fewer pieces than a car with four smaller doors.

GTC4 Lusso wrap ideas should account for the parts that need cut-outs or come off. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and each lens.

To work out how much vinyl to wrap a GTC4 Lusso, count the one generation from 2016 to 2021. There is no earlier body, so the film estimate stays the same across all years. The hatchback shape and the size of the doors are the main factors for the amount of film.

Questions about wrapping a Ferrari GTC4 Lusso

How much vinyl does it take to wrap a Ferrari GTC4 Lusso?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Ferrari GTC4 Lusso. If you use chrome or patterned film, the amount is about 76 ft (23 m). These figures are for the newest body of this one-generation car.

Can I wrap only the hood or the roof of a GTC4 Lusso?

Yes, you can wrap only the hood or the roof of a GTC4 Lusso. A partial wrap covers the roof, hood, and mirror caps, but you can choose just one of those panels.

Is a GTC4 Lusso hard to wrap?

The GTC4 Lusso is not the easiest car to wrap because of its size and the need for precise cut-outs. The car is 193.8 in (4,922 mm) long, and every trim has parking sensors and cameras that require careful cutting. The tailgate glass also means the film must end at the edge of the glass.

How many generations of the GTC4 Lusso does this page cover?

This page covers one generation of the GTC4 Lusso. The car was produced from 2016 to 2021 with a single hatchback body style.