Wraps by car

Ferrari F12 Berlinetta wrap

The Ferrari F12 Berlinetta wrap page covers the first generation produced from 2012 to 2017. A full vinyl wrap of the coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. This page gives body details, film amounts, and answers for planning a wrap.

1generations15.5 mof film for a full wrap

Ferrari F12 Berlinetta, first generation, factory photo
Ferrari F12 Berlinetta, first generation. Factory color shown.

Ferrari F12 Berlinetta wrap colors and ideas

  • F12 Berlinetta black wrap
  • F12 Berlinetta white wrap
  • F12 Berlinetta gray wrap
  • F12 Berlinetta silver wrap
  • F12 Berlinetta red wrap
  • F12 Berlinetta blue wrap
  • F12 Berlinetta green wrap
  • F12 Berlinetta yellow wrap
  • F12 Berlinetta orange wrap
  • F12 Berlinetta purple wrap
  • F12 Berlinetta pink wrap
  • F12 Berlinetta teal wrap
  • F12 Berlinetta brown wrap
  • F12 Berlinetta gold wrap
  • F12 Berlinetta chrome wrap
  • F12 Berlinetta color shift wrap
  • F12 Berlinetta carbon fiber wrap
  • F12 Berlinetta camo and patterned wrap

How much vinyl to wrap a Ferrari F12 Berlinetta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017coupe (2 doors)181.8 in (4,618 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

F12 Berlinetta wrap cost factors

The F12 Berlinetta wrap cost depends mainly on the film chosen, the condition of the paint, and the installer's labor. The car is 181.8 in (4,618 mm) long, so a full wrap needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 57 ft (17.5 m) and often costs more per foot.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

F12 Berlinetta wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari F12 Berlinetta, first generation, factory photo
Factory color shown

2012–2017 F12 Berlinetta coupe (first generation)

2012–2017coupe (2 doors)181.8 in (4,618 mm)

The first generation F12 Berlinetta was produced from 2012 to 2017 as a two-door coupe. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. A test spot checks that the film adheres well and can be removed without lifting old paint.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an F12 Berlinetta

Owners can choose a partial wrap of the roof, hood, or mirror caps on an F12 Berlinetta. A chrome delete covers window trim and badges with black film for a sharper look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari F12 Berlinetta: body, cut-outs and film

The Ferrari F12 Berlinetta vinyl wrap covers a two-door coupe with a length of 181.8 in (4,618 mm). The long side doors each need one large piece of film, so the installer works with large sheets. The car's size means a full wrap uses more film than a smaller sports car.

For F12 Berlinetta wrap ideas, every trim has fog lamps in the front bumper that need cut-outs in the bumper film. The two long side doors are wrapped as one large piece each, which can show off a clean color change. Installers may also remove badges and trim for a neater finish.

To know how much vinyl to wrap an F12 Berlinetta, the first generation from 2012 to 2017 is the only body. There is no earlier generation to compare, so the film estimate stays the same for every year of this model. Owners counting film use about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap.

Questions about wrapping a Ferrari F12 Berlinetta

How much vinyl does it take to wrap a Ferrari F12 Berlinetta?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Ferrari F12 Berlinetta. For chrome or patterned film, the estimate is about 57 ft (17.5 m) because extra film is needed for trimming.

Can I wrap only the hood or the roof of an F12 Berlinetta?

Yes, you can wrap only the hood or the roof of an F12 Berlinetta as a partial wrap. Mirror caps are another single-part option, and a chrome delete of the window trim and badges is also possible.

Is an F12 Berlinetta hard to wrap?

The F12 Berlinetta is not unusually hard to wrap, but it has long side doors and fog lamps that need cut-outs. Each door is one large piece of film, which takes patience to lay without wrinkles. The 181.8 in (4,618 mm) length means a full wrap uses more film and labor than a smaller car.

How many generations of the F12 Berlinetta does this page cover?

This page covers one generation of the Ferrari F12 Berlinetta, produced from 2012 to 2017. There are no other generations in the catalog, so all information applies to every year of this model.