Wraps by car

Ferrari Roma wrap

The Ferrari Roma wrap page covers the first generation of this front-engine grand tourer, produced since 2019. A full vinyl wrap uses about 49 ft (15 m) on the convertible and up to 51 ft (15.5 m) on the coupe with 60-inch (1.52 m) cast film. Chrome or patterned film can take up to about 59 ft (18 m) due to pattern matching and extra trim pieces.

1generations15 mof film for a full wrap

Ferrari Roma, first generation, factory photo
Ferrari Roma, first generation. Factory color shown.

Ferrari Roma wrap colors and ideas

  • Roma black wrap
  • Roma white wrap
  • Roma gray wrap
  • Roma silver wrap
  • Roma red wrap
  • Roma blue wrap
  • Roma green wrap
  • Roma yellow wrap
  • Roma orange wrap
  • Roma purple wrap
  • Roma pink wrap
  • Roma teal wrap
  • Roma brown wrap
  • Roma gold wrap
  • Roma chrome wrap
  • Roma color shift wrap
  • Roma carbon fiber wrap
  • Roma camo and patterned wrap

How much vinyl to wrap a Ferrari Roma

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowconvertible, coupe (2 doors)183.3 in (4,656 mm)about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Roma wrap cost factors

Roma wrap cost is driven by the size of the car and the number of body panels to remove and reinstall. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) film, while the convertible needs about 49 ft (15 m). Installers often remove mirrors, door handles, and trim pieces for a clean edge, adding labor. The cameras in every trim require careful cutting around the lenses, which also affects the time needed.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Every trim has cameras in the body: the film is cut around each lens.

Roma wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Roma, first generation, factory photo
Factory color shown

2019–now Roma convertible, coupe (first generation)

2019–nowconvertible, coupe (2 doors)183.3 in (4,656 mm)

On the first-generation Ferrari Roma, the open top is not wrapped and the film ends where the fabric or panel meeting begins. For the convertible with a fabric top, installers tuck the film under the edges around the top opening. For a folding hard top, the roof panels are wrapped separately from the body. Either way, the wrap lines remain crisp because the top mechanism is left untouched.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Roma

A partial wrap on the Roma covers the roof, hood, or mirror caps instead of the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option, clear film applied to the front end. These smaller jobs use less vinyl than a full wrap and can still change the car's look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari Roma: body, cut-outs and film

The Ferrari Roma vinyl wrap fits two body styles, a coupe and a convertible, both with two long doors. Each door is one large piece of film, so a full wrap covers fewer but bigger panels than on a four-door car. The coupe is 183.3 in (4,656 mm) long, and the convertible adds a folding top mechanism that changes the rear deck shape. Installers plan the film around the top mechanism, as it cannot be wrapped like a fixed roof.

Roma wrap ideas start with the two long side doors, each wrapped as one large piece that benefits from a high-quality cast film. Every trim has cameras in the body, so the film is cut around each lens to keep sensors working. The convertible's fabric top is not wrapped, and the film ends where the top begins. The folding hard top version is wrapped as panels of its own, so installers treat them separately.

How much vinyl to wrap a Roma depends on the body style: the coupe needs about 51 ft (15.5 m), while the convertible needs about 49 ft (15 m) with 60-inch (1.52 m) cast film. The difference comes from the convertible's smaller roof area. All first-generation cars share the same 183.3 in (4,656 mm) length, so the main variance is the top. Patterned or chrome film adds waste, up to about 59 ft (18 m).

Questions about wrapping a Ferrari Roma

How much vinyl does it take to wrap a Ferrari Roma?

A full Ferrari Roma wrap takes about 49 ft (15 m) on the convertible and up to 51 ft (15.5 m) on the coupe using 60-inch (1.52 m) cast film. Chrome or patterned film may require up to about 59 ft (18 m) because of extra waste from matching patterns and trimming. These numbers assume a standard full wrap with no extra pieces like a roof in a different color.

Is the top of a Roma wrapped?

No, the top of a Roma convertible is not wrapped if it is fabric, and the film ends where the top begins. A folding hard top is wrapped as panels of its own, separate from the body. Installers leave all top mechanisms untouched. The roof area is included in the full wrap only when it is a fixed coupe roof.

Which Roma body takes more film?

The coupe takes more film than the convertible: about 51 ft (15.5 m) versus 49 ft (15 m) with 60-inch (1.52 m) cast film. The convertible has a smaller roof area because the top is not wrapped. Both bodies measure 183.3 in (4,656 mm) long, so the difference is only in the roof and rear deck.

Can I wrap only the hood or the roof of a Roma?

Yes, you can wrap only the hood or the roof of a Roma as a partial wrap. Mirror caps can also be wrapped on their own. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another smaller job, applying clear film to the front end.