Wraps by car

Ferrari 458 wrap

This page covers the Ferrari 458 wrap, a vinyl wrap for the two-seat sports car built from 2009 to 2016. The Ferrari 458 comes as a convertible and a coupe in one generation. A full wrap of the newest body takes about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe with 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Ferrari 458, first generation, factory photo
Ferrari 458, first generation. Factory color shown.

Ferrari 458 wrap colors and ideas

  • Ferrari 458 black wrap
  • Ferrari 458 white wrap
  • Ferrari 458 gray wrap
  • Ferrari 458 silver wrap
  • Ferrari 458 red wrap
  • Ferrari 458 blue wrap
  • Ferrari 458 green wrap
  • Ferrari 458 yellow wrap
  • Ferrari 458 orange wrap
  • Ferrari 458 purple wrap
  • Ferrari 458 pink wrap
  • Ferrari 458 teal wrap
  • Ferrari 458 brown wrap
  • Ferrari 458 gold wrap
  • Ferrari 458 chrome wrap
  • Ferrari 458 color shift wrap
  • Ferrari 458 carbon fiber wrap
  • Ferrari 458 camo and patterned wrap

How much vinyl to wrap a Ferrari 458

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2016convertible, coupe (2 doors)178.2 in (4,527 mm)about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Ferrari 458 wrap cost factors

The Ferrari 458 wrap cost depends on the body style, the film you pick and the labor for the large panels. The convertible needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, and the coupe needs about 49 ft (15 m). Chrome or patterned film can take up to about 56 ft (17 m) because of wasted material. The long side doors are one large piece each, which takes skill to install cleanly.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 458 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 458, first generation, factory photo
Factory color shown

2009–2016 Ferrari 458 convertible, coupe (first generation)

2009–2016convertible, coupe (2 doors)178.2 in (4,527 mm)

The first generation Ferrari 458 has an open top that is not covered with vinyl. On the convertible, the fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own. The film ends cleanly at the edge of the top, with no wrap on the fabric or the mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Ferrari 458

A partial wrap on a Ferrari 458 can cover the roof, hood or mirror caps. The chrome delete on this car covers the window trim and badges with black film. Paint protection film (PPF) is clear film put on the front end. A partial wrap is a smaller job than the full 43 ft (13 m) or 49 ft (15 m) wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari 458: body, cut-outs and film

The Ferrari 458 vinyl wrap follows the two body styles and their sizes. The convertible and the coupe are both 178.2 in (4,527 mm) long, and each side door is one large piece of film. The two long side doors need wide panels that reach over the front fender. A full wrap of the coupe uses more film than the convertible. Cast film of 60-inch (1.52 m) width covers the large panels without seams.

Ferrari 458 wrap ideas start with the two long side doors, which are each wrapped as one large piece of film. The convertible body has a fabric top that is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own. The car has no big front grille, but the vents behind the doors need cut-outs.

How much vinyl to wrap a Ferrari 458 depends on the body style. The convertible takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. The coupe takes about 49 ft (15 m) of the same film. Chrome or patterned film can take up to about 56 ft (17 m). The film estimate changes only between the two body styles, not between production years.

Questions about wrapping a Ferrari 458

How much vinyl does it take to wrap a Ferrari 458?

A Ferrari 458 takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for the convertible and about 49 ft (15 m) for the coupe. The estimate is for the newest body, as the film requirement did not change over the production run. Chrome or patterned film can take up to about 56 ft (17 m).

Is the top of a Ferrari 458 wrapped?

No, the fabric top of a Ferrari 458 convertible is not wrapped. The film ends where the fabric top begins. A folding hard top is wrapped as panels of its own. The top is left as it is from the factory.

Which Ferrari 458 body takes more film?

The Ferrari 458 coupe takes more film than the convertible. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, and the convertible needs about 43 ft (13 m). The coupe has a solid roof that is wrapped, while the convertible's fabric top is not.

Can I wrap only the hood or the roof of a Ferrari 458?

Yes, you can wrap only the hood or the roof of a Ferrari 458. A partial wrap can cover the roof, hood or mirror caps. You can also do a chrome delete on the window trim and badges or put paint protection film on the front end.