Wraps by car

Ferrari California wrap

The Ferrari California wrap page covers the 2008–2017 convertible in one generation and the film a full wrap needs. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film adds about five feet to the total. Use these numbers as the starting point for planning your project.

1generations15 mof film for a full wrap

Ferrari California, first generation, factory photo
Ferrari California, first generation. Factory color shown.

Ferrari California wrap colors and ideas

  • California black wrap
  • California white wrap
  • California gray wrap
  • California silver wrap
  • California red wrap
  • California blue wrap
  • California green wrap
  • California yellow wrap
  • California orange wrap
  • California purple wrap
  • California pink wrap
  • California teal wrap
  • California brown wrap
  • California gold wrap
  • California chrome wrap
  • California color shift wrap
  • California carbon fiber wrap
  • California camo and patterned wrap

How much vinyl to wrap a Ferrari California

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2017convertible (2 doors)179.6 in (4,563 mm) to 179.9 in (4,570 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

California wrap cost factors

California wrap cost is driven by the size of the car, the film chosen, and the work around the convertible top. The body length is about 179.6 in (4,563 mm) to 179.9 in (4,570 mm), and a full wrap takes about 49 ft (15 m) of standard film or 54 ft (16.5 m) of chrome or patterned film. Cut-outs for the fog lamps and the separate panels of the folding hard top add labor time. A partial job or chrome delete changes the amount of film and labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

California wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari California, first generation, factory photo
Factory color shown

2008–2017 California convertible (first generation)

2008–2017convertible (2 doors)179.6 in (4,563 mm) to 179.9 in (4,570 mm)

The first generation Ferrari California is a two-door convertible produced from 2008 through 2017. In a wrap, the folding hard top is covered as panels of its own rather than one continuous sheet. If the car has a fabric top, the film ends where the top begins and the fabric is left unwrapped. A restyling in 2014 changed the body length slightly from 179.6 in (4,563 mm) to 179.9 in (4,570 mm).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a California

A partial wrap on a Ferrari California can be the hood, mirror caps, or rear deck instead of the full body. California chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be applied to the front end. These smaller jobs use less film and leave the rest of the paint visible.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari California: body, cut-outs and film

The Ferrari California vinyl wrap follows a two-door convertible body that is about 179.6 in (4,563 mm) to 179.9 in (4,570 mm) long. A single body style means one set of panel shapes from 2008 through 2017. The folding hard top is wrapped as panels of its own and not as one continuous piece. The fabric top is not wrapped, so film ends where the top begins.

California wrap ideas start with the front bumper, where every trim has fog lamps that need cut-outs in the film. The folding hard top is wrapped as separate panels when you choose to cover it. A fabric top is left uncovered and the wrap ends at its edges. These details change how the film is cut on the car.

How much vinyl to wrap a California depends on the body length of 179.6 in (4,563 mm) to 179.9 in (4,570 mm). The first generation ran from 2008 through 2017 with a restyling in 2014. The newer body after 2014 is slightly longer and takes the same 49 ft (15 m) of standard film for a full wrap. A chrome or patterned film needs about 54 ft (16.5 m).

Questions about wrapping a Ferrari California

How much vinyl does it take to wrap a Ferrari California?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Ferrari California in standard vinyl. If you choose chrome or patterned film, the amount is about 54 ft (16.5 m) for a full wrap. These figures are for the newest body of this model in the catalog.

Is the top of a California wrapped?

The top of a California is wrapped only when it is a folding hard top, and then it is covered as separate panels of its own. A fabric top is not wrapped, and the film ends where the top begins. The wrap does not go over the fabric material itself.

Which years of the California take the same film cuts?

All years of the first generation California from 2008 through 2017 take the same film cuts for the panels. There was a restyling in 2014, but the body style stayed a two-door convertible with the same panel layout. The slight length change from 179.6 in (4,563 mm) to 179.9 in (4,570 mm) does not alter the cut pattern.

Can I wrap only the hood or the roof of a California?

You can wrap only the hood, mirror caps, or rear deck of a California as a partial wrap. A chrome delete of the window trim and badges is also an option. A clear paint protection film (PPF) can be applied just to the front end. These smaller jobs are listed under the partial wrap section of the page.