Wraps by car

Ferrari 812 wrap

The Ferrari 812 wrap page covers the single generation built from 2017 onward, offered as a convertible or a two-door coupe. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 59 ft (18 m) because of extra matching and trimming. The little length difference between the convertible and the coupe does not change the film estimate.

1generations15.5 mof film for a full wrap

Ferrari 812, first generation, factory photo
Ferrari 812, first generation. Factory color shown.

Ferrari 812 wrap colors and ideas

  • Ferrari 812 black wrap
  • Ferrari 812 white wrap
  • Ferrari 812 gray wrap
  • Ferrari 812 silver wrap
  • Ferrari 812 red wrap
  • Ferrari 812 blue wrap
  • Ferrari 812 green wrap
  • Ferrari 812 yellow wrap
  • Ferrari 812 orange wrap
  • Ferrari 812 purple wrap
  • Ferrari 812 pink wrap
  • Ferrari 812 teal wrap
  • Ferrari 812 brown wrap
  • Ferrari 812 gold wrap
  • Ferrari 812 chrome wrap
  • Ferrari 812 color shift wrap
  • Ferrari 812 carbon fiber wrap
  • Ferrari 812 camo and patterned wrap

How much vinyl to wrap a Ferrari 812

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowconvertible, coupe (2 doors)183.3 in (4,657 mm) to 184.8 in (4,693 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Ferrari 812 wrap cost factors

The Ferrari 812 wrap cost depends on the size of the car, the film chosen, and the labor for its details. The body is between 183.3 in (4,657 mm) and 184.8 in (4,693 mm) long, and a full wrap needs about 51 ft (15.5 m) of cast film. Chrome or patterned film raises the amount to about 59 ft (18 m) because of the extra matching work. Cut-outs around parking sensors and cameras on every trim add time to the installation.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Ferrari 812 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 812, first generation, factory photo
Factory color shown

2017–now Ferrari 812 convertible, coupe (first generation)

2017–nowconvertible, coupe (2 doors)183.3 in (4,657 mm) to 184.8 in (4,693 mm)

The open top of the Ferrari 812 convertible is not wrapped and the film ends where the fabric or folding roof begins. A fabric top is left bare, so the wrap stops at its edges. A folding hard top is treated as its own set of panels and gets wrapped separately. The coupe has a fixed roof that is wrapped as part of the main body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Ferrari 812

A Ferrari 812 chrome delete covers bright window trim and badges with black film. A partial wrap can cover the roof, hood, or mirror caps. Paint protection film (PPF) is a clear option for the front end of the car. These smaller jobs use less film than a full wrap and focus on one area at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ferrari 812: body, cut-outs and film

A Ferrari 812 vinyl wrap deals with a long, low sports car body between 183.3 in (4,657 mm) and 184.8 in (4,693 mm). The two long side doors are each covered with one large piece of film. The convertible has a top that is never wrapped, while the coupe roof adds a small amount of material. The extra film needed for a chrome or patterned finish comes from careful pattern matching on this body.

Ferrari 812 wrap ideas must respect parking sensors in the bumpers and cameras in the body on every trim. The film is cut around each sensor and each lens so the driver aids keep working. On the convertible the fabric top is not wrapped and the film ends where the top begins. A folding hard top, when fitted, is wrapped as separate panels of its own.

To work out how much vinyl to wrap a Ferrari 812, look at the body style instead of the generation because there is only one generation. The coupe and the convertible share the same 51 ft (15.5 m) estimate for standard cast film. The convertible top is not wrapped, so no film is used there. A chrome or patterned film raises the estimate to about 59 ft (18 m) for either body.

Questions about wrapping a Ferrari 812

How much vinyl does it take to wrap a Ferrari 812?

A Ferrari 812 takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, the estimate is about 59 ft (18 m). The additional five or more feet comes from matching the pattern across the panels. The convertible and the coupe use the same amount.

Is the top of a Ferrari 812 wrapped?

No, the fabric top of a Ferrari 812 convertible is not wrapped. The wrap ends at the edge where the top meets the body. If the car has a folding hard top, that top is wrapped as separate panels. The coupe roof is wrapped as part of the body.

Which Ferrari 812 body takes more film?

Both Ferrari 812 body styles use the same amount of film for a standard wrap. The convertible and the coupe each take about 51 ft (15.5 m) of cast film. The top of the convertible is not wrapped, but the coupe roof adds a similar small area. With chrome or patterned film both bodies need about 59 ft (18 m).

Can I wrap only the hood or the roof of a Ferrari 812?

Yes, you can wrap only the hood or the roof of a Ferrari 812 as a partial wrap. The roof, hood, and mirror caps are common choices for smaller jobs. A chrome delete covers the window trim and badges separately. Paint protection film offers clear coverage for the front end instead of a color change wrap.