Wraps by car

Ferrari 250 GT Lusso wrap

The Ferrari 250 GT Lusso wrap page covers this one-generation coupe built from 1962 to 1964. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The page explains how the body shape, trim and paint age affect the wrap work.

1generations14.5 mof film for a full wrap

Ferrari 250 GT Lusso, first generation, factory photo
Ferrari 250 GT Lusso, first generation. Factory color shown.

Ferrari 250 GT Lusso wrap colors and ideas

  • Ferrari 250 GT Lusso black wrap
  • Ferrari 250 GT Lusso white wrap
  • Ferrari 250 GT Lusso gray wrap
  • Ferrari 250 GT Lusso silver wrap
  • Ferrari 250 GT Lusso red wrap
  • Ferrari 250 GT Lusso blue wrap
  • Ferrari 250 GT Lusso green wrap
  • Ferrari 250 GT Lusso yellow wrap
  • Ferrari 250 GT Lusso orange wrap
  • Ferrari 250 GT Lusso purple wrap
  • Ferrari 250 GT Lusso pink wrap
  • Ferrari 250 GT Lusso teal wrap
  • Ferrari 250 GT Lusso brown wrap
  • Ferrari 250 GT Lusso gold wrap
  • Ferrari 250 GT Lusso chrome wrap
  • Ferrari 250 GT Lusso color shift wrap
  • Ferrari 250 GT Lusso carbon fiber wrap
  • Ferrari 250 GT Lusso camo and patterned wrap

How much vinyl to wrap a Ferrari 250 GT Lusso

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1962–1964coupe (2 doors)173.6 in (4,410 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

Ferrari 250 GT Lusso wrap cost factors

Ferrari 250 GT Lusso wrap cost depends on the film type, the paint condition and the installer's time. A standard color change uses about 48 ft (14.5 m) of cast film, while chrome or patterned film needs about 54 ft (16.5 m). The large door panels and the long body of 173.6 in (4,410 mm) add labor time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ferrari 250 GT Lusso wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 250 GT Lusso, first generation, factory photo
Factory color shown

1962–1964 Ferrari 250 GT Lusso coupe (first generation)

1962–1964coupe (2 doors)173.6 in (4,410 mm)

The first generation Ferrari 250 GT Lusso was made from 1962 to 1964 as a two-door coupe. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap. The installer checks a small area of the paint to make sure the film adheres well and removes cleanly.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a Ferrari 250 GT Lusso

A partial wrap on a Ferrari 250 GT Lusso can cover the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) can be applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 250 GT Lusso: body, cut-outs and film

The Ferrari 250 GT Lusso vinyl wrap needs to follow the long coupe lines and the two large door panels. The car is 173.6 in (4,410 mm) long, which is a mid-size body for a wrap. Each side door is one large piece of film, so the installer must stretch and position it carefully.

Ferrari 250 GT Lusso wrap ideas start with the two long side doors, where each door is one large piece of film. The door handles and badges need cut-outs, and the window trim can be covered with black film as a chrome delete. The front and rear bumpers are painted, so they can be wrapped in the same color or a contrast film.

How much vinyl to wrap a Ferrari 250 GT Lusso depends on the film type: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a standard color change. Chrome or patterned film needs about 54 ft (16.5 m) because the pattern must be matched at the seams. The single generation from 1962 to 1964 has the same coupe body, so the amount does not change between years.

Questions about wrapping a Ferrari 250 GT Lusso

How much vinyl does it take to wrap a Ferrari 250 GT Lusso?

A full wrap of a Ferrari 250 GT Lusso takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the amount is about 54 ft (16.5 m). These figures are for the coupe body built from 1962 to 1964.

Can I wrap only the hood or the roof of a Ferrari 250 GT Lusso?

Yes, you can wrap only the hood or the roof of a Ferrari 250 GT Lusso. A partial wrap can also cover the mirror caps. The installer cuts the film to fit each panel and trims the edges.

Is a Ferrari 250 GT Lusso hard to wrap?

A Ferrari 250 GT Lusso is not the hardest car to wrap, but the large door panels and the long body add work. Each side door is one large piece of film, which requires careful stretching. The car is 173.6 in (4,410 mm) long, so the installer needs space to work around it.

How many generations of the Ferrari 250 GT Lusso does this page cover?

This page covers one generation of the Ferrari 250 GT Lusso, produced from 1962 to 1964. The coupe body style stayed the same through those years. The film amounts are given for that single generation.