Wraps by car

Ferrari 348 wrap

The Ferrari 348 wrap page covers the single generation produced from 1989 to 1995. A full vinyl wrap on this sports car takes about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe. The film width is 60 inches (1.52 m).

1generations13 mof film for a full wrap

Ferrari 348, first generation, factory photo
Ferrari 348, first generation. Factory color shown.

Ferrari 348 wrap colors and ideas

  • Ferrari 348 black wrap
  • Ferrari 348 white wrap
  • Ferrari 348 gray wrap
  • Ferrari 348 silver wrap
  • Ferrari 348 red wrap
  • Ferrari 348 blue wrap
  • Ferrari 348 green wrap
  • Ferrari 348 yellow wrap
  • Ferrari 348 orange wrap
  • Ferrari 348 purple wrap
  • Ferrari 348 pink wrap
  • Ferrari 348 teal wrap
  • Ferrari 348 brown wrap
  • Ferrari 348 gold wrap
  • Ferrari 348 chrome wrap
  • Ferrari 348 color shift wrap
  • Ferrari 348 carbon fiber wrap
  • Ferrari 348 camo and patterned wrap

How much vinyl to wrap a Ferrari 348

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1995convertible, coupe, targa (2 doors)166.5 in (4,230 mm)about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m)

Ferrari 348 wrap cost factors

The Ferrari 348 wrap cost depends on the body style and the amount of film needed. A convertible uses about 39 ft (12 m) while a coupe uses about 43 ft (13 m) of 60-inch (1.52 m) film. Installer labor for the two long doors and cut-outs also affects the total. Special finishes like chrome or patterned film increase material use up to about 52 ft (16 m).

  • Film for a full wrap: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m).
  • Body: convertible, coupe, targa (2 doors).
  • Convertible and targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 348 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 348, first generation, factory photo
Factory color shown

1989–1995 Ferrari 348 convertible, coupe, targa (first generation)

1989–1995convertible, coupe, targa (2 doors)166.5 in (4,230 mm)

On the first generation Ferrari 348, an open top changes how a wrap is applied. The fabric top of the convertible or targa is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

Convertible and targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Ferrari 348

A partial wrap on a Ferrari 348 can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 348: body, cut-outs and film

A Ferrari 348 vinyl wrap must handle three body styles: convertible, coupe, and targa, all with two doors. The car is 166.5 in (4,230 mm) long, so film panels are planned around that length. The convertible and targa have fabric tops that are not wrapped, which reduces the film area. The coupe uses the most film at about 43 ft (13 m).

Ferrari 348 wrap ideas include covering the two long side doors as single large pieces. The convertible and targa have a fabric top that is not wrapped and the film ends where it begins. A folding hard top, if fitted, is wrapped as panels of its own. Installers may remove badges and trim for a cleaner finish.

To find how much vinyl to wrap a Ferrari 348, compare the body styles of the single generation. The convertible needs about 39 ft (12 m) and the coupe about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film can use up to about 52 ft (16 m). There are no other generations to change the film requirement.

Questions about wrapping a Ferrari 348

How much vinyl does it take to wrap a Ferrari 348?

It takes about 39 ft (12 m) for the convertible to 43 ft (13 m) for the coupe of 60-inch (1.52 m) cast film to wrap a Ferrari 348. The exact amount depends on the body style and film pattern.

Is the top of a Ferrari 348 wrapped?

No, the fabric top of a convertible or targa Ferrari 348 is not wrapped. The film ends where the top begins. A folding hard top is wrapped as panels of its own.

Which Ferrari 348 body takes more film?

The coupe takes more film than the convertible. The coupe needs about 43 ft (13 m) while the convertible needs about 39 ft (12 m) of 60-inch (1.52 m) film.

Can I wrap only the hood or the roof of a Ferrari 348?

Yes, you can wrap only the hood or the roof of a Ferrari 348. A partial wrap can also cover mirror caps. These jobs use less film than a full wrap.