Wraps by car

Ferrari 360 wrap

The Ferrari 360 wrap page covers the 1999–2005 Ferrari 360 in its single generation, a two-door sports car with a convertible and a coupe body. A full wrap of the newest body takes about 43 ft (13 m) of film for the convertible and 49 ft (15 m) for the coupe, measured in 60-inch (1.52 m) cast vinyl wrap.

1generations13 mof film for a full wrap

Ferrari 360, first generation, factory photo
Ferrari 360, first generation. Factory color shown.

Ferrari 360 wrap colors and ideas

  • Ferrari 360 black wrap
  • Ferrari 360 white wrap
  • Ferrari 360 gray wrap
  • Ferrari 360 silver wrap
  • Ferrari 360 red wrap
  • Ferrari 360 blue wrap
  • Ferrari 360 green wrap
  • Ferrari 360 yellow wrap
  • Ferrari 360 orange wrap
  • Ferrari 360 purple wrap
  • Ferrari 360 pink wrap
  • Ferrari 360 teal wrap
  • Ferrari 360 brown wrap
  • Ferrari 360 gold wrap
  • Ferrari 360 chrome wrap
  • Ferrari 360 color shift wrap
  • Ferrari 360 carbon fiber wrap
  • Ferrari 360 camo and patterned wrap

How much vinyl to wrap a Ferrari 360

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005convertible, coupe (2 doors)176.3 in (4,477 mm)about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Ferrari 360 wrap cost factors

Ferrari 360 wrap cost depends on the body style, the film type, and the amount of disassembly the job needs. The coupe uses more film than the convertible, about 49 ft (15 m) versus 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the material figure to up to about 56 ft (17 m), which raises the cost further. Complex areas like the front bumper and side mirrors add labor time to the quote.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 360 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 360, first generation, factory photo
Factory color shown

1999–2005 Ferrari 360 convertible, coupe (first generation)

1999–2005convertible, coupe (2 doors)176.3 in (4,477 mm)

The first generation Ferrari 360 from 1999 to 2005 has an open top on the convertible that is not wrapped in vinyl. The film ends where the fabric begins, leaving the roof material exposed and the wrap clearly defined at the beltline. If the car has a folding hard top instead, that surface is wrapped as separate panels. This keeps the top functional and the wrap edges hidden.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Ferrari 360

A full wrap is not the only option for a Ferrari 360. You can wrap just the roof, hood, or mirror caps for a smaller color change. Chrome delete covers window trim and badges with black film to change the brightwork look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 360: body, cut-outs and film

The Ferrari 360 vinyl wrap follows the car's two body styles and its length of 176.3 in (4,477 mm). The convertible top is not wrapped, so the film ends where the fabric begins and the rest of the body gets full coverage. The coupe is a continuous shell from nose to tail, which needs more film but leaves no edge at the roof. Both bodies have two long side doors, and each door is one large piece of film for a clean look.

Ferrari 360 wrap ideas start with the two long side doors, which are best wrapped as one piece each to avoid seams. The convertible body has a fabric top that is not wrapped, and the film ends where it begins, leaving the roof area untouched. A folding hard top is wrapped as panels of its own if the car has one fitted. The door handles and mirrors need cut-outs, and badges or trim may be removed for a neater install.

How much vinyl to wrap a Ferrari 360 depends on the body style you have. The coupe uses more material than the convertible because it has a full roof and rear pillars to cover. The convertible's fabric top is left unwrapped, so the film estimate drops to about 43 ft (13 m) of 60-inch (1.52 m) cast film. The coupe needs roughly 49 ft (15 m) of the same film, and both figures are for a full color change wrap.

Questions about wrapping a Ferrari 360

How much vinyl does it take to wrap a Ferrari 360?

Yes, it takes about 43 ft (13 m) for the convertible and 49 ft (15 m) for the coupe of 60-inch (1.52 m) cast vinyl to wrap a Ferrari 360. The convertible uses less film because the fabric top is not covered. The coupe's full roof and rear glass area push the figure higher.

Is the top of a Ferrari 360 wrapped?

No, the top of a Ferrari 360 convertible is not wrapped. The fabric roof is left exposed and the vinyl ends at its edge. Only a folding hard top, if present, is wrapped as panels of its own.

Which Ferrari 360 body takes more film?

The Ferrari 360 coupe takes more film than the convertible. The coupe requires about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the convertible uses about 43 ft (13 m) because its soft top is not wrapped.

Can I wrap only the hood or the roof of a Ferrari 360?

Yes, you can wrap only the hood or the roof of a Ferrari 360 as a partial wrap. Other smaller jobs include mirror caps, a chrome delete on window trim and badges, or clear paint protection film on the front end.