Wraps by car

Ferrari 412 wrap

The Ferrari 412 wrap page covers the single generation built from 1985 to 1988. A full vinyl wrap of this 189.4-inch (4,810 mm) coupe takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 59 ft (18 m).

1generations16 mof film for a full wrap

Ferrari 412, first generation, factory photo
Ferrari 412, first generation. Factory color shown.

Ferrari 412 wrap colors and ideas

  • Ferrari 412 black wrap
  • Ferrari 412 white wrap
  • Ferrari 412 gray wrap
  • Ferrari 412 silver wrap
  • Ferrari 412 red wrap
  • Ferrari 412 blue wrap
  • Ferrari 412 green wrap
  • Ferrari 412 yellow wrap
  • Ferrari 412 orange wrap
  • Ferrari 412 purple wrap
  • Ferrari 412 pink wrap
  • Ferrari 412 teal wrap
  • Ferrari 412 brown wrap
  • Ferrari 412 gold wrap
  • Ferrari 412 chrome wrap
  • Ferrari 412 color shift wrap
  • Ferrari 412 carbon fiber wrap
  • Ferrari 412 camo and patterned wrap

How much vinyl to wrap a Ferrari 412

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1988coupe (2 doors)189.4 in (4,810 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Ferrari 412 wrap cost factors

Ferrari 412 wrap cost depends on the size of the car and the film you choose. The body is 189.4 in (4,810 mm) long, which affects the amount of material used. A full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 59 ft (18 m). Paint condition also matters, as repairs or extra prep add labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ferrari 412 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 412, first generation, factory photo
Factory color shown

1985–1988 Ferrari 412 coupe (first generation)

1985–1988coupe (2 doors)189.4 in (4,810 mm)

The first generation Ferrari 412 was built from 1985 to 1988 as a two-door coupe. Its length is 189.4 in (4,810 mm), and a full wrap needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. Paint age is a key factor on a car of these years, as panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Ferrari 412

A partial wrap on a Ferrari 412 can cover the roof, hood, or mirror caps in a color change film. Chrome delete is another option, with black film over the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 412: body, cut-outs and film

A Ferrari 412 vinyl wrap has to deal with a long two-door coupe body. The car stretches 189.4 in (4,810 mm), so the roof and side panels call for more film than a small sports car. The long doors are each one large piece, which reduces visible seams. The smooth body lines help the film lay down cleanly.

Ferrari 412 wrap ideas often focus on the long side doors and the roof. Each door is one large piece of film, so a color change looks clean along the side. The roof wraps in a single sheet, and the mirrors and pillars can be done separately. Badging and trim may need cut-outs or removal during installation.

Knowing how much vinyl to wrap a Ferrari 412 comes down to the single generation offered. The 1985–1988 coupe is the only body style, with a length of 189.4 in (4,810 mm). A full wrap of this car uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 7 ft (2 m) to the total.

Questions about wrapping a Ferrari 412

How much vinyl does it take to wrap a Ferrari 412?

A Ferrari 412 needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the 1985–1988 coupe body. If you use chrome or patterned film, the total rises to about 59 ft (18 m).

Can I wrap only the hood or the roof of a Ferrari 412?

Yes, you can wrap only the hood or the roof of a Ferrari 412. A partial wrap can cover those panels, along with mirror caps if desired. You can also choose chrome delete for the window trim and badges. Paint protection film on the front end is another smaller job.

Is a Ferrari 412 hard to wrap?

A Ferrari 412 is not especially hard to wrap, but its size adds work. The body is 189.4 in (4,810 mm) long, so panels like the roof and doors are large. Each long side door is one piece of film, which takes care to align. The film estimate is about 52 ft (16 m) for a full wrap.

How many generations of the Ferrari 412 does this page cover?

This page covers one generation of the Ferrari 412. The car was built from 1985 to 1988 as a two-door coupe. A full wrap of that body needs about 52 ft (16 m) of 60-inch (1.52 m) cast film.