Wraps by car

Ferrari 456 wrap

The Ferrari 456 wrap page covers the two generations of this sports car, from 1992 to 2003. A full vinyl wrap of the Ferrari 456 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. The first generation ran from 1992 to 1997 and the second from 1998 to 2003. Both bodies are the same length, 186.2 in (4,730 mm), so film estimates match.

2generations16 mof film for a full wrap

Ferrari 456, second generation, factory photo
Ferrari 456, second generation. Factory color shown.

Ferrari 456 wrap colors and ideas

  • Ferrari 456 black wrap
  • Ferrari 456 white wrap
  • Ferrari 456 gray wrap
  • Ferrari 456 silver wrap
  • Ferrari 456 red wrap
  • Ferrari 456 blue wrap
  • Ferrari 456 green wrap
  • Ferrari 456 yellow wrap
  • Ferrari 456 orange wrap
  • Ferrari 456 purple wrap
  • Ferrari 456 pink wrap
  • Ferrari 456 teal wrap
  • Ferrari 456 brown wrap
  • Ferrari 456 gold wrap
  • Ferrari 456 chrome wrap
  • Ferrari 456 color shift wrap
  • Ferrari 456 carbon fiber wrap
  • Ferrari 456 camo and patterned wrap

How much vinyl to wrap a Ferrari 456

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003coupe (2 doors)186.2 in (4,730 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1992–1997coupe (2 doors)186.2 in (4,730 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Ferrari 456 wrap cost factors

Ferrari 456 wrap cost depends on the size of the car, film choice, and the condition of the paint. The body needs about 52 ft (16 m) of 60-inch (1.52 m) film for a standard color wrap. Chrome or patterned film raises the amount to about 59 ft (18 m). Paint correction before the wrap adds labor to the job.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ferrari 456 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 456, second generation, factory photo
Factory color shown

1998–2003 Ferrari 456 coupe (second generation)

1998–2003coupe (2 doors)186.2 in (4,730 mm)

The second generation Ferrari 456 M, built from 1998 to 2003, often has original paint that may be aged or repainted. A test spot comes before a full wrap to ensure the film adheres well to older paint. This generation uses the same film amount as the first, about 52 ft (16 m) of cast film. The two long doors are each covered with one large piece of film.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Ferrari 456, first generation, factory photo
Factory color shown

1992–1997 Ferrari 456 coupe (first generation)

1992–1997coupe (2 doors)186.2 in (4,730 mm)

The first generation Ferrari 456, made from 1992 to 1997, is a two-door coupe with a length of 186.2 in (4,730 mm). Its size and style mean a full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) film. The hood, roof, and trunk are large, so a standard kit has five main panels. Chrome or patterned film increases the amount to about 59 ft (18 m).

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Ferrari 456

A Ferrari 456 chrome delete covers the window trim and badges with black film for a subtle change. Partial wrap options include the roof, hood, and mirror caps, which use less film than a full wrap. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs suit an owner who wants a smaller change without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 456: body, cut-outs and film

A Ferrari 456 vinyl wrap starts with two long side doors, each covered by one large piece of film. The coupe shape has no roof seams to hide, so the hood, roof, and trunk add three more large panels. The 186.2 in (4,730 mm) length means a full wrap is about 52 ft (16 m) of 60-inch (1.52 m) film. A car this size suits a clean color change wrap with few panel breaks.

Ferrari 456 wrap ideas focus on the front and rear bumpers, door handles, mirrors, and trim. A chrome delete covers the window trim and badges with black film. The side doors need no cut-outs for trim, but the door handles and mirrors are removed for a neat edge. The front bumper has large air intakes that need careful trimming.

To work out how much vinyl to wrap a Ferrari 456, account for both generations being the same length. The first generation from 1992 to 1997 and the second from 1998 to 2003 share the 186.2 in (4,730 mm) body. Film use for either is about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film calls for about 59 ft (18 m) because of pattern matching.

Questions about wrapping a Ferrari 456

How much vinyl does it take to wrap a Ferrari 456?

A Ferrari 456 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is based on the newest body from 1998–2003, which is the same size as the earlier generation. Chrome or patterned film requires about 59 ft (18 m).

Can I wrap only the hood or the roof of a Ferrari 456?

Yes, you can wrap only the hood or the roof of a Ferrari 456, along with mirror caps. These partial wrap jobs use less film than a full wrap. A chrome delete is another smaller option for window trim and badges. Paint protection film on the front end is also available.

Is a Ferrari 456 hard to wrap?

A Ferrari 456 is not the hardest car to wrap, but the long doors add work. Each door is one large piece of film, so a second installer helps with handling. The 186.2 in (4,730 mm) length makes the roof and hood large panels to lay smoothly. The front bumper intakes also need careful cutting.

How many generations of the Ferrari 456 does this page cover?

This page covers two generations of the Ferrari 456 in the catalog. The first generation is from 1992 to 1997 and the second from 1998 to 2003. Both generations share the same body length and film estimates.