Wraps by car

Ferrari 550 wrap

The Ferrari 550 wrap page covers the single generation produced from 1996 to 2001. A full vinyl wrap of the newest body takes about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe. The car is a two-door sports car offered in convertible and coupe styles. This guide explains the film needed, body details, and wrap options.

1generations13 mof film for a full wrap

Ferrari 550, first generation, factory photo
Ferrari 550, first generation. Factory color shown.

Ferrari 550 wrap colors and ideas

  • Ferrari 550 black wrap
  • Ferrari 550 white wrap
  • Ferrari 550 gray wrap
  • Ferrari 550 silver wrap
  • Ferrari 550 red wrap
  • Ferrari 550 blue wrap
  • Ferrari 550 green wrap
  • Ferrari 550 yellow wrap
  • Ferrari 550 orange wrap
  • Ferrari 550 purple wrap
  • Ferrari 550 pink wrap
  • Ferrari 550 teal wrap
  • Ferrari 550 brown wrap
  • Ferrari 550 gold wrap
  • Ferrari 550 chrome wrap
  • Ferrari 550 color shift wrap
  • Ferrari 550 carbon fiber wrap
  • Ferrari 550 camo and patterned wrap

How much vinyl to wrap a Ferrari 550

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001convertible, coupe (2 doors)179.1 in (4,550 mm)about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Ferrari 550 wrap cost factors

Ferrari 550 wrap cost depends on the body style, film type, and labor. The coupe needs about 51 ft (15.5 m) of cast film while the convertible uses about 43 ft (13 m). Chrome or patterned film can require up to about 56 ft (17 m) because of pattern matching. A car this size takes a full day of work and careful handling of the long doors.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 550 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 550, first generation, factory photo
Factory color shown

1996–2001 Ferrari 550 convertible, coupe (first generation)

1996–2001convertible, coupe (2 doors)179.1 in (4,550 mm)

The open top of the Ferrari 550 is not wrapped when it has a fabric roof. The film ends where the fabric begins, so the convertible uses less material than the coupe. If the car has a folding hard top, that top is wrapped as separate panels. The body below the top is wrapped normally.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Ferrari 550

A Ferrari 550 chrome delete covers window trim and badges with black film. A partial wrap on this car can be the roof, hood, or mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done in a few hours.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 550: body, cut-outs and film

The Ferrari 550 vinyl wrap is shaped by its two long doors and body styles. The coupe is 179.1 in (4,550 mm) long and uses roughly 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The convertible uses less film, about 43 ft (13 m), because its fabric top is not wrapped. Each side door is one large piece, so the installer needs wide film and careful stretching.

Ferrari 550 wrap ideas include handling the convertible top and long doors. The fabric top is not wrapped, and the film ends where the top begins. The two long side doors are each covered with one large piece of film. These details affect the layout and trimming during installation.

How much vinyl to wrap a Ferrari 550 does not change between generations because there is only one. The first generation ran from 1996 to 2001 in these two body styles. The film estimate stays between 43 ft (13 m) and 51 ft (15.5 m) depending on the body. Installers count the same panels for every year of this model.

Questions about wrapping a Ferrari 550

How much vinyl does it take to wrap a Ferrari 550?

A Ferrari 550 needs about 43 ft (13 m) of vinyl for the convertible and 51 ft (15.5 m) for the coupe. The figures are for 60-inch (1.52 m) cast film on the newest body. The amount changes with film type, pattern, and installer waste.

Is the top of a Ferrari 550 wrapped?

The fabric top of a Ferrari 550 is not wrapped. The vinyl wrap ends at the edge of the fabric roof. If the car has a folding hard top, that top is wrapped as its own panels.

Which Ferrari 550 body takes more film?

The coupe body of the Ferrari 550 takes more film than the convertible. The coupe uses about 51 ft (15.5 m) while the convertible uses about 43 ft (13 m) because the fabric roof is left unwrapped.

Can I wrap only the hood or the roof of a Ferrari 550?

Yes, you can wrap only the hood or the roof of a Ferrari 550. A partial wrap can also cover the mirror caps. Chrome delete is another small job for window trim and badges. Paint protection film is available for just the front end.