Wraps by car

Ferrari 575M wrap

This page covers the Ferrari 575M wrap, a vinyl wrap service for the single generation produced from 2002 to 2006. The Ferrari 575M is a two-door sports car available as a convertible and a coupe. A full wrap of the newest body takes about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe using 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Ferrari 575M, first generation, factory photo
Ferrari 575M, first generation. Factory color shown.

Ferrari 575M wrap colors and ideas

  • Ferrari 575M black wrap
  • Ferrari 575M white wrap
  • Ferrari 575M gray wrap
  • Ferrari 575M silver wrap
  • Ferrari 575M red wrap
  • Ferrari 575M blue wrap
  • Ferrari 575M green wrap
  • Ferrari 575M yellow wrap
  • Ferrari 575M orange wrap
  • Ferrari 575M purple wrap
  • Ferrari 575M pink wrap
  • Ferrari 575M teal wrap
  • Ferrari 575M brown wrap
  • Ferrari 575M gold wrap
  • Ferrari 575M chrome wrap
  • Ferrari 575M color shift wrap
  • Ferrari 575M carbon fiber wrap
  • Ferrari 575M camo and patterned wrap

How much vinyl to wrap a Ferrari 575M

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2006convertible, coupe (2 doors)179.1 in (4,550 mm)about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Ferrari 575M wrap cost factors

The Ferrari 575M wrap cost depends on the car's body style, film type, and installation work. The coupe uses about 51 ft (15.5 m) of film, while the convertible uses about 49 ft (15 m). Chrome or patterned film pushes the total to about 56 ft (17 m). The two long doors and the convertible top area add labor time that affects the final cost.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Ferrari 575M wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari 575M, first generation, factory photo
Factory color shown

2002–2006 Ferrari 575M convertible, coupe (first generation)

2002–2006convertible, coupe (2 doors)179.1 in (4,550 mm)

The open top of the Ferrari 575M means the fabric top is not wrapped and the film ends where it begins. On the convertible, installers run the film up to the edge of the fabric and tuck it cleanly. A folding hard top, when present, is wrapped as its own separate panels. This keeps the top functioning without film interfering with the folding mechanism.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Ferrari 575M

A partial wrap on a Ferrari 575M can cover the roof, hood, or mirror caps instead of the whole car. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and focus on specific areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari 575M: body, cut-outs and film

A Ferrari 575M vinyl wrap must account for the car's two body styles and its dimensions. The car is 179.1 in (4,550 mm) long, with two long side doors that each take one large piece of film. The convertible's fabric top is not wrapped, so the film ends where the top begins. The coupe has a fixed roof that adds roughly 2 ft (0.5 m) of film compared to the convertible.

Ferrari 575M wrap ideas start with planning for the parts that need cut-outs or come off. The convertible's fabric top is not wrapped and the film ends where it begins. Each of the two long side doors is one large piece of film that requires careful trimming around handles and mirrors. A folding hard top, if equipped, is wrapped as panels of its own.

To know how much vinyl to wrap a Ferrari 575M, consider the film estimate of the single generation. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the convertible needs about 49 ft (15 m). Chrome or patterned film increases the total to up to about 56 ft (17 m). There is no earlier or later generation to change the count.

Questions about wrapping a Ferrari 575M

How much vinyl does it take to wrap a Ferrari 575M?

How much vinyl does it take to wrap a Ferrari 575M? It takes about 49 ft (15 m) for the convertible to 51 ft (15.5 m) for the coupe using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 56 ft (17 m). These figures come from the film estimate of the only generation, produced from 2002 to 2006.

Is the top of a Ferrari 575M wrapped?

Is the top of a Ferrari 575M wrapped? No, the fabric top of the convertible is not wrapped. The film ends where the fabric top begins. A folding hard top, if the car has one, is wrapped as panels of its own.

Which Ferrari 575M body takes more film?

Which Ferrari 575M body takes more film? The coupe takes more film than the convertible. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the convertible needs about 49 ft (15 m). The fixed roof of the coupe accounts for the extra film.

Can I wrap only the hood or the roof of a Ferrari 575M?

Can I wrap only the hood or the roof of a Ferrari 575M? Yes, a partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film, and paint protection film (PPF) can be applied to the front end. These smaller jobs focus on specific areas rather than the whole car.