Wraps by car

Ferrari Dino 206 GT wrap

This page covers the Ferrari Dino 206 GT and a full wrap of its first-generation coupe. The catalog includes one generation of this sports car, produced from 1967 to 1969. A full vinyl wrap of the body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

Ferrari Dino 206 GT, first generation, factory photo
Ferrari Dino 206 GT, first generation. Factory color shown.

Ferrari Dino 206 GT wrap colors and ideas

  • Dino 206 GT black wrap
  • Dino 206 GT white wrap
  • Dino 206 GT gray wrap
  • Dino 206 GT silver wrap
  • Dino 206 GT red wrap
  • Dino 206 GT blue wrap
  • Dino 206 GT green wrap
  • Dino 206 GT yellow wrap
  • Dino 206 GT orange wrap
  • Dino 206 GT purple wrap
  • Dino 206 GT pink wrap
  • Dino 206 GT teal wrap
  • Dino 206 GT brown wrap
  • Dino 206 GT gold wrap
  • Dino 206 GT chrome wrap
  • Dino 206 GT color shift wrap
  • Dino 206 GT carbon fiber wrap
  • Dino 206 GT camo and patterned wrap

How much vinyl to wrap a Ferrari Dino 206 GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1969coupe (2 doors)163.4 in (4,150 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Dino 206 GT wrap cost factors

The Dino 206 GT wrap cost depends on the film type, the state of the paint, and the shop's labor time. The car is 163.4 in (4,150 mm) long with two large door panels. A full wrap uses about 39 ft (12 m) of cast film. If the paint is original and aged, extra surface correction before wrapping adds to the cost.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Dino 206 GT wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Dino 206 GT, first generation, factory photo
Factory color shown

1967–1969 Dino 206 GT coupe (first generation)

1967–1969coupe (2 doors)163.4 in (4,150 mm)

The first generation of the Ferrari Dino 206 GT ran from 1967 to 1969 as a two-door coupe. Paint age is a key factor: on a car of these years panels may be original or repainted. A test spot should be done before a full wrap to check how the film adheres. The body length is 163.4 in (4,150 mm), and a full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Dino 206 GT

Partial wrap options for the Dino 206 GT include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs let you change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari Dino 206 GT: body, cut-outs and film

The Ferrari Dino 206 GT vinyl wrap is shaped by its compact two-door coupe body. The car measures 163.4 in (4,150 mm) long, which keeps the main panels small and manageable. The two long side doors are each one large piece of film, so they need careful handling.

Dino 206 GT wrap ideas start with the side doors, which are the main large panels. The doors are each one large piece of film, so they need proper surface preparation. Around the body, the installer will cut out the door handles and the small trim pieces. The mirrors and badges are also removed or cut around for a clean finish.

To work out how much vinyl to wrap a Dino 206 GT, you use the single-generation body dimensions. The first generation spans 1967 to 1969, so all cars share the same length and panel count. There are no other generations to compare, which makes film estimation straightforward. The full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Ferrari Dino 206 GT

How much vinyl does it take to wrap a Ferrari Dino 206 GT?

Yes, a full wrap of a Ferrari Dino 206 GT takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. This figure covers the first-generation coupe body from 1967 to 1969. The two long side doors are each one large piece of film, which adds to the material needed.

Can I wrap only the hood or the roof of a Dino 206 GT?

Yes, you can wrap only the hood or the roof of a Dino 206 GT as a partial wrap. The partial wrap options for this car are the roof, hood, and mirror caps. You can also choose a chrome delete for window trim and badges or clear paint protection film on the front end.

Is a Dino 206 GT hard to wrap?

Yes, a Dino 206 GT is somewhat hard to wrap because the two long side doors are each one large piece of film. The car is only 163.4 in (4,150 mm) long, but the doors require careful stretching and positioning. Paint age can also add work, since panels may be original or repainted and need a test spot first.

How many generations of the Dino 206 GT does this page cover?

This page covers one generation of the Ferrari Dino 206 GT, produced from 1967 to 1969. There are no other generations in the catalog. The first generation is a two-door coupe with a length of 163.4 in (4,150 mm).