Wraps by car

Ferrari Dino 208/308 GT4 wrap

This page covers a Ferrari Dino 208/308 GT4 wrap and the vinyl wrap used on this car. The Ferrari Dino 208/308 GT4 was built from 1974 to 1980 in one generation. A full wrap of the newest body takes about 38 ft (11.5 m) of film for the targa or 39 ft (12 m) for the coupe.

1generations12 mof film for a full wrap

Ferrari Dino 208/308 GT4, first generation, factory photo
Ferrari Dino 208/308 GT4, first generation. Factory color shown.

Ferrari Dino 208/308 GT4 wrap colors and ideas

  • Dino 208/308 GT4 black wrap
  • Dino 208/308 GT4 white wrap
  • Dino 208/308 GT4 gray wrap
  • Dino 208/308 GT4 silver wrap
  • Dino 208/308 GT4 red wrap
  • Dino 208/308 GT4 blue wrap
  • Dino 208/308 GT4 green wrap
  • Dino 208/308 GT4 yellow wrap
  • Dino 208/308 GT4 orange wrap
  • Dino 208/308 GT4 purple wrap
  • Dino 208/308 GT4 pink wrap
  • Dino 208/308 GT4 teal wrap
  • Dino 208/308 GT4 brown wrap
  • Dino 208/308 GT4 gold wrap
  • Dino 208/308 GT4 chrome wrap
  • Dino 208/308 GT4 color shift wrap
  • Dino 208/308 GT4 carbon fiber wrap
  • Dino 208/308 GT4 camo and patterned wrap

How much vinyl to wrap a Ferrari Dino 208/308 GT4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1974–1980coupe, targa (2 doors)166.5 in (4,230 mm)about 38 ft (11.5 m) for the targa to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)

Dino 208/308 GT4 wrap cost factors

A Dino 208/308 GT4 wrap cost is driven by body style, film type and the amount of film needed. The coupe uses about 39 ft (12 m) and the targa about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 51 ft (15.5 m). Labor is also higher because the two long doors are large single pieces.

  • Film for a full wrap: about 38 ft (11.5 m) for the targa to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).
  • Body: coupe, targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Dino 208/308 GT4 wraps by generation

Swipe sideways. Tap a card for the full description.

Ferrari Dino 208/308 GT4, first generation, factory photo
Factory color shown

1974–1980 Dino 208/308 GT4 coupe, targa (first generation)

1974–1980coupe, targa (2 doors)166.5 in (4,230 mm)

The open top on a first generation Ferrari Dino 208/308 GT4 changes how a full wrap is planned. On a targa, the fabric top is not wrapped and the vinyl ends where that fabric begins. If the car has a folding hard top, each of its panels is wrapped separately as part of the job.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) for the targa to 39 ft (12 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Dino 208/308 GT4

A Dino 208/308 GT4 chrome delete covers the window trim and badges in black film. A partial wrap on this car often includes the roof, hood and mirror caps. For protection, paint protection film is applied as clear film on the front end. These options are smaller than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Ferrari Dino 208/308 GT4: body, cut-outs and film

A Ferrari Dino 208/308 GT4 vinyl wrap has to follow the car's small two-door coupe or targa shape. The body is 166.5 in (4,230 mm) long, so a full color change needs precise sizing. The two long side doors are each wrapped as one large piece of film. This means the installer must handle big panels around the doors.

Dino 208/308 GT4 wrap ideas often depend on what comes off the body before film is applied. The side mirrors, badges and window trim are removed to get clean edges. The targa body has a fabric top that is not wrapped, and the film ends where that top begins. If the car has a folding hard top, that top is wrapped as panels of its own.

To know how much vinyl to wrap a Dino 208/308 GT4, you compare the two body styles. The coupe takes about 39 ft (12 m), while the targa takes about 38 ft (11.5 m) with 60-inch (1.52 m) cast film. This car has only one generation from 1974 to 1980, so the body size does not change between years.

Questions about wrapping a Ferrari Dino 208/308 GT4

How much vinyl does it take to wrap a Ferrari Dino 208/308 GT4?

A Ferrari Dino 208/308 GT4 needs about 38 ft (11.5 m) of vinyl for the targa or 39 ft (12 m) for the coupe. These numbers assume 60-inch (1.52 m) cast film and a full body wrap. The targa figure does not wrap the fabric top.

Is the top of a Dino 208/308 GT4 wrapped?

No, the top of a targa Dino 208/308 GT4 is not wrapped with vinyl. A fabric top is left uncovered and the film ends where that fabric begins. If the car has a folding hard top, each panel of that top is wrapped on its own.

Which Dino 208/308 GT4 body takes more film?

The coupe Dino 208/308 GT4 takes more film than the targa. The coupe uses about 39 ft (12 m), while the targa uses about 38 ft (11.5 m) with 60-inch (1.52 m) cast film. The difference comes from the roof area, since the targa's fabric top is not wrapped.

Can I wrap only the hood or the roof of a Dino 208/308 GT4?

Yes, you can wrap only the hood or the roof of a Dino 208/308 GT4. A partial wrap on this car often covers the roof, hood and mirror caps. A chrome delete covers the window trim and badges instead.