Wraps by car

Lancia A 112 wrap

The Lancia A 112 wrap page covers this mini hatchback from its single generation produced between 1982 and 1986. A full vinyl wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 10 ft (3 m) to that estimate.

1generations11.5 mof film for a full wrap

Lancia A 112, first generation, factory photo
Lancia A 112, first generation. Factory color shown.

Lancia A 112 wrap colors and ideas

  • Lancia A 112 black wrap
  • Lancia A 112 white wrap
  • Lancia A 112 gray wrap
  • Lancia A 112 silver wrap
  • Lancia A 112 red wrap
  • Lancia A 112 blue wrap
  • Lancia A 112 green wrap
  • Lancia A 112 yellow wrap
  • Lancia A 112 orange wrap
  • Lancia A 112 purple wrap
  • Lancia A 112 pink wrap
  • Lancia A 112 teal wrap
  • Lancia A 112 brown wrap
  • Lancia A 112 gold wrap
  • Lancia A 112 chrome wrap
  • Lancia A 112 color shift wrap
  • Lancia A 112 carbon fiber wrap
  • Lancia A 112 camo and patterned wrap

How much vinyl to wrap a Lancia A 112

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1986hatchback (3 doors)127.2 in (3,230 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Lancia A 112 wrap cost factors

The Lancia A 112 wrap cost is set by the film area, surface preparation, and how many parts come off. A full wrap of this 127.2 in (3,230 mm) hatchback needs about 38 ft (11.5 m) of film on clean, smooth paint. Removing mirrors, handles, and trim adds labor to the job. A car with original paint may need extra cleaning and adhesion testing.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Lancia A 112 wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia A 112, first generation, factory photo
Factory color shown

1982–1986 Lancia A 112 hatchback (first generation)

1982–1986hatchback (3 doors)127.2 in (3,230 mm)

The first generation Lancia A 112 arrived as a three-door hatchback for the 1982–1986 production run. Its compact 127.2 in (3,230 mm) length keeps full wrap film use around 38 ft (11.5 m). On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Paint age can affect how film adheres to each panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Lancia A 112

Partial wrap on a Lancia A 112 covers the roof, hood, or mirror caps without doing the whole car. Chrome delete turns window trim and badges black with film. Paint protection film (PPF) is a clear layer on the front end. These options use less film and suit a first project on this mini.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia A 112: body, cut-outs and film

The Lancia A 112 vinyl wrap starts with a small three-door hatchback body that keeps film use low. Its length of 127.2 in (3,230 mm) means a full wrap needs about 38 ft (11.5 m) of standard cast film. The flat sides and simple front end suit large pieces that go on quickly.

Lancia A 112 wrap ideas should plan for a tailgate with the rear glass in it. The film ends at the edge of the glass, so the tailgate is cut around that opening. Two long side doors are each covered with one large piece of film. Mirrors and door handles come off for cleaner edges.

How much vinyl to wrap a Lancia A 112 depends on the body style and film type. The newest body is a three-door hatchback, and a standard color change uses about 38 ft (11.5 m) of 60-inch (1.52 m) film. Chrome or patterned vinyl raises the estimate to about 48 ft (14.5 m). This car has one generation only, so film amounts stay consistent.

Questions about wrapping a Lancia A 112

How much vinyl does it take to wrap a Lancia A 112?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap a Lancia A 112. That estimate covers the full body of the newest three-door hatchback. If you choose chrome or patterned film, plan for about 48 ft (14.5 m). The extra allowance covers pattern matching and trim areas.

Can I wrap only the hood or the roof of a Lancia A 112?

Yes, you can wrap only the hood or the roof of a Lancia A 112. The partial wrap options for this car include the roof, hood, and mirror caps. These smaller jobs need less film and leave the rest of the paint untouched. It is a practical way to change the look without a full wrap.

Is a Lancia A 112 hard to wrap?

The Lancia A 112 is not hard to wrap, but a few parts add work. The tailgate has the rear glass in it, so film must end at the edge of the glass. Each long side door is one large piece that needs careful squeegeeing to avoid lift. At 127.2 in (3,230 mm) long, the car is small enough for one installer to handle.

How many generations of the Lancia A 112 does this page cover?

This page covers one generation of the Lancia A 112. Production ran from 1982 to 1986 as a three-door hatchback. All wrap estimates on this page are based on that single body.