Wraps by car

Lancia Rally 037 wrap

The Lancia Rally 037 wrap guide covers the single generation produced from 1982 to 1983. This page explains vinyl wrap film needs for the coupe body with two doors. A full wrap of this body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Lancia Rally 037, first generation, factory photo
Lancia Rally 037, first generation. Factory color shown.

Lancia Rally 037 wrap colors and ideas

  • Rally 037 black wrap
  • Rally 037 white wrap
  • Rally 037 gray wrap
  • Rally 037 silver wrap
  • Rally 037 red wrap
  • Rally 037 blue wrap
  • Rally 037 green wrap
  • Rally 037 yellow wrap
  • Rally 037 orange wrap
  • Rally 037 purple wrap
  • Rally 037 pink wrap
  • Rally 037 teal wrap
  • Rally 037 brown wrap
  • Rally 037 gold wrap
  • Rally 037 chrome wrap
  • Rally 037 color shift wrap
  • Rally 037 carbon fiber wrap
  • Rally 037 camo and patterned wrap

How much vinyl to wrap a Lancia Rally 037

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1983coupe (2 doors)154.1 in (3,915 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Rally 037 wrap cost factors

Rally 037 wrap cost depends on the film type, the condition of the panels, and the prep work. The car needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, which fixes the material amount. The two long doors are each one large piece, so a door repaint or deep scratch adds labor before film goes on. Chrome delete or a partial wrap changes the job from a full wrap to a smaller one.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Rally 037 wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Rally 037, first generation, factory photo
Factory color shown

1982–1983 Rally 037 coupe (first generation)

1982–1983coupe (2 doors)154.1 in (3,915 mm)

The first generation Lancia Rally 037 was produced in 1982 and 1983 as a coupe with two doors. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap. A wrapper checks each panel for adhesion before laying film over old or fresh paint.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Rally 037

Partial wrap on a Rally 037 covers the roof, hood, or mirror caps as separate jobs. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use less film than a full wrap but need the same edge sealing.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Rally 037: body, cut-outs and film

The Lancia Rally 037 vinyl wrap starts with a compact coupe body that is 154.1 in (3,915 mm) long. The two long side doors each call for one large piece of film. With only one body style, a wrapper plans film like a simple two-door sports car.

Rally 037 wrap ideas focus on the long side doors because each door is one large piece of film. Door handles and side mirrors need cut-outs or removal for a clean finish. The front and rear bumpers come off to wrap edges properly. Any bright window trim becomes a chrome delete with a detail knife and knifeless tape.

How much vinyl to wrap a Rally 037 stays the same for every car because this page covers one generation. The body length of 154.1 in (3,915 mm) and the two-door coupe shape set the film estimate. A wrapper counts about 43 ft (13 m) of cast film, or 49 ft (15 m) for chrome or patterned film. This is the only generation in the catalog for this model.

Questions about wrapping a Lancia Rally 037

How much vinyl does it take to wrap a Lancia Rally 037?

It takes about 43 ft (13 m) of 60-inch (1.52 m) cast film to wrap a Lancia Rally 037. That figure is for the coupe body of the single generation. With chrome or patterned film, plan for about 49 ft (15 m).

Can I wrap only the hood or the roof of a Rally 037?

Yes, you can wrap only the hood or the roof of a Rally 037 as a partial wrap. Other partial jobs include mirror caps, a chrome delete on window trim and badges, or clear paint protection film on the front end.

Is a Rally 037 hard to wrap?

A Rally 037 is not hard to wrap, but the two long side doors add work because each door is one large piece of film. The short body of 154.1 in (3,915 mm) helps with handling the film. Careful squeegeeing and a second pair of hands avoid wrinkles on the door panels.

How many generations of the Rally 037 does this page cover?

This page covers one generation of the Rally 037. The first generation ran from 1982 to 1983 as a coupe with two doors.