Wraps by car

Lancia Fulvia wrap

A Lancia Fulvia wrap covers the classic mid-size body of this Lancia model, produced in one generation from 1963 to 1976. The coupe and sedan bodies both take a full vinyl wrap, with the coupe requiring about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. For the sedan, plan on about 46 ft (14 m) of the same film. A chrome or patterned film option uses up to about 57 ft (17.5 m).

1generations13.5 mof film for a full wrap

Lancia Fulvia, first generation, factory photo
Lancia Fulvia, first generation. Factory color shown.

Lancia Fulvia wrap colors and ideas

  • Fulvia black wrap
  • Fulvia white wrap
  • Fulvia gray wrap
  • Fulvia silver wrap
  • Fulvia red wrap
  • Fulvia blue wrap
  • Fulvia green wrap
  • Fulvia yellow wrap
  • Fulvia orange wrap
  • Fulvia purple wrap
  • Fulvia pink wrap
  • Fulvia teal wrap
  • Fulvia brown wrap
  • Fulvia gold wrap
  • Fulvia chrome wrap
  • Fulvia color shift wrap
  • Fulvia carbon fiber wrap
  • Fulvia camo and patterned wrap

How much vinyl to wrap a Lancia Fulvia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1963–1976coupe, sedan (2 or 4 doors)163.8 in (4,160 mm)about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Fulvia wrap cost factors

Fulvia wrap cost depends on the body style, the film type, and the amount of disassembly. The coupe uses about 44 ft (13.5 m) and the sedan about 46 ft (14 m) of 60-inch film. Chrome or patterned film pushes the material need to about 57 ft (17.5 m). Extra work like removing trim or bumpers also affects the total.

  • Film for a full wrap: about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Fulvia wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Fulvia, first generation, factory photo
Factory color shown

1963–1976 Fulvia coupe, sedan (first generation)

1963–1976coupe, sedan (2 or 4 doors)163.8 in (4,160 mm)

The first generation Lancia Fulvia includes both the coupe and the sedan with two or four doors. The coupe's shorter roof and curved rear glass make the film application tighter, while the sedan has additional door and roof panels. This difference in panel count means the sedan needs slightly more film than the coupe. Both styles use the same 60-inch film width.

Film: about 44 ft (13.5 m) for the coupe to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Fulvia

The Lancia Fulvia can also receive smaller jobs like a partial wrap on the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film for a more modern look. Paint protection film (PPF) is applied to the front end to guard against stone chips. These options need less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Fulvia: body, cut-outs and film

A Lancia Fulvia vinyl wrap is shaped by the compact 163.8 in (4,160 mm) body and its two or four door sedan or coupe styles. The coupe has a tighter roof and rear window area, which takes careful film positioning. The sedan adds rear door panels and a longer roofline, so it uses slightly more film. Overall, the mid-size dimensions keep the wrap close to standard film quantities.

Fulvia wrap ideas start with the trim and badges that need removal or cutting around. The chrome window surrounds and door handles are areas where the installer cuts carefully or removes parts. The front grille and headlight rings also need precise cut-outs. Removing the bumpers gives cleaner edges along the lower body.

How much vinyl to wrap a Fulvia depends on the body style, since the coupe and sedan share the same generation but differ in panel count. The coupe needs about 44 ft (13.5 m) of 60-inch film, while the sedan needs about 46 ft (14 m). If you choose chrome or patterned film, the total can rise to about 57 ft (17.5 m). There are no other generations, so the film estimate stays consistent across the years 1963 to 1976.

Questions about wrapping a Lancia Fulvia

How much vinyl does it take to wrap a Lancia Fulvia?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a Lancia Fulvia coupe. For the sedan, the amount is about 46 ft (14 m). If you use chrome or patterned film, plan for up to about 57 ft (17.5 m).

Which Fulvia body takes more film?

The Lancia Fulvia sedan takes more film than the coupe. The sedan needs about 46 ft (14 m) of 60-inch film, while the coupe needs about 44 ft (13.5 m). The extra film comes from the sedan's additional door and roof panels.

Can I wrap only the hood or the roof of a Fulvia?

Yes, you can wrap only the hood or the roof of a Lancia Fulvia. Partial wrap options include the roof, hood, and mirror caps. You can also choose chrome delete for the window trim and badges, or paint protection film for the front end.

Is a Fulvia hard to wrap?

A Lancia Fulvia is not extremely hard to wrap, but it has some time-consuming details. The chrome window surrounds, door handles, grille, and headlight rings need careful cutting or removal. The compact 163.8 in (4,160 mm) body with its classic curves requires patience to avoid wrinkles. Removing the bumpers also adds to the preparation work.