Wraps by car

Lancia Phedra wrap

The Lancia Phedra wrap is a large project for a five-door minivan produced from 2002 to 2010. This catalog covers one generation of the Phedra and the vinyl wrap film a full wrap of the body takes. A complete color change uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

1generations21.5 mof film for a full wrap

Lancia Phedra, first generation, factory photo
Lancia Phedra, first generation. Factory color shown.

Lancia Phedra wrap colors and ideas

  • Phedra black wrap
  • Phedra white wrap
  • Phedra gray wrap
  • Phedra silver wrap
  • Phedra red wrap
  • Phedra blue wrap
  • Phedra green wrap
  • Phedra yellow wrap
  • Phedra orange wrap
  • Phedra purple wrap
  • Phedra pink wrap
  • Phedra teal wrap
  • Phedra brown wrap
  • Phedra gold wrap
  • Phedra chrome wrap
  • Phedra color shift wrap
  • Phedra carbon fiber wrap
  • Phedra camo and patterned wrap

How much vinyl to wrap a Lancia Phedra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2010van (5 doors)187.0 in (4,750 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Phedra wrap cost factors

Phedra wrap cost depends on the wrap area, the film type, and the extra work on this large van. A full wrap of a 187.0 in (4,750 mm) body uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The sliding door tracks require careful cutting, and the tall roof adds installation time.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (69.0 in (1,752 mm)): the roof is wrapped from a platform.

Phedra wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Phedra, first generation, factory photo
Factory color shown

2002–2010 Phedra van (first generation)

2002–2010van (5 doors)187.0 in (4,750 mm)

The first generation Lancia Phedra was built from 2002 to 2010 as a five-door van. Its sliding side doors have tracks that stay bare and decide where the film is cut. No other generation is in this catalog.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (69.0 in (1,752 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Phedra

A partial wrap on a Lancia Phedra can cover the roof, the hood, or the mirror caps. A Phedra chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Phedra: body, cut-outs and film

A Lancia Phedra vinyl wrap has to follow the tall, long minivan shape. The body is 187.0 in (4,750 mm) long and 69.0 in (1,752 mm) tall, so the roof must be wrapped from a platform. The five-door van body has large, flat side panels that take film well.

Phedra wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The tall roof needs a platform for safe installation. The large tailgate and the hood are straightforward panels for a two-tone design.

How much vinyl to wrap a Phedra depends on the film you choose. A full color change wrap calls for about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, you will need about 82 ft (25 m).

Questions about wrapping a Lancia Phedra

How much vinyl does it take to wrap a Lancia Phedra?

A full wrap of a Lancia Phedra takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. That figure covers the newest body in the catalog, which is the first generation from 2002 to 2010.

Are the sliding doors of a Phedra wrapped?

Yes, the sliding doors of a Phedra are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close freely. A clean line along the track is part of a correct installation on this van.

Can I wrap only the hood or the roof of a Phedra?

Yes, you can wrap only the hood or the roof of a Phedra. A partial wrap of this van can also include the mirror caps. Clear paint protection film on the front end is another partial option.

Is a Phedra hard to wrap?

A Phedra is hard to wrap because of its size and the sliding door tracks. The body is 187.0 in (4,750 mm) long and 69.0 in (1,752 mm) tall, so the roof must be wrapped from a platform. The tracks must stay bare, which demands precise cutting along the doors.