Wraps by car

Lancia Dedra wrap

The Lancia Dedra wrap page covers the first-generation Dedra sedan and wagon made from 1989 to 1999. A full vinyl wrap of the newest body takes about 49 ft (15 m) for the sedan and up to 52 ft (16 m) for the wagon with 60-inch (1.52 m) cast film. The page explains how the body style changes the film amount and the labor.

1generations15 mof film for a full wrap

Lancia Dedra, first generation, factory photo
Lancia Dedra, first generation. Factory color shown.

Lancia Dedra wrap colors and ideas

  • Dedra black wrap
  • Dedra white wrap
  • Dedra gray wrap
  • Dedra silver wrap
  • Dedra red wrap
  • Dedra blue wrap
  • Dedra green wrap
  • Dedra yellow wrap
  • Dedra orange wrap
  • Dedra purple wrap
  • Dedra pink wrap
  • Dedra teal wrap
  • Dedra brown wrap
  • Dedra gold wrap
  • Dedra chrome wrap
  • Dedra color shift wrap
  • Dedra carbon fiber wrap
  • Dedra camo and patterned wrap

How much vinyl to wrap a Lancia Dedra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1999sedan, wagon (4 or 5 doors)171.0 in (4,343 mm)about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Dedra wrap cost factors

Dedra wrap cost depends on the film amount, the body style and the shop time the panels need. The wagon uses more film than the sedan, up to 52 ft (16 m) against about 49 ft (15 m). A chrome or patterned film raises the material bill because it needs up to about 67 ft (20.5 m). Cut-outs around the tailgate glass on the wagon also add labor to the job.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Dedra wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Dedra, first generation, factory photo
Factory color shown

1989–1999 Dedra sedan, wagon (first generation)

1989–1999sedan, wagon (4 or 5 doors)171.0 in (4,343 mm)

The first-generation Lancia Dedra was made from 1989 to 1999 in sedan and wagon forms, and the body style decides the panel plan and the film amount. The sedan is the shorter wrap at about 49 ft (15 m) of film. The wagon adds the tailgate with glass and takes up to 52 ft (16 m). With only one generation, the panel shapes stay the same across the years.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Dedra

A Dedra chrome delete or partial wrap covers smaller jobs like the roof, hood or mirror caps instead of the full body. A chrome delete is bright window trim and badges covered with black film. Paint protection film (PPF) is a clear film that can be applied to the front end of the Dedra. These jobs use less film than a full wrap and change only part of the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Dedra: body, cut-outs and film

A Lancia Dedra vinyl wrap starts with the body style you have, because the sedan is shorter than the wagon. The sedan runs 171.0 in (4,343 mm) long and needs about 49 ft (15 m) of film. The wagon adds length at the rear and takes up to 52 ft (16 m). The four or five doors add seams that a shop plans around the handles and the belt line.

Dedra wrap ideas should respect the tailgate on the wagon, where the rear glass is set into the liftgate. The film ends at the edge of the glass, so the installer cuts and tucks along that line. On the sedan the trunk lid is a separate panel and the glass is not in the panel, which makes the rear simpler. Door handles, mirrors and badges still need cut-outs or removal.

How much vinyl to wrap a Dedra depends on the body style and the film type you pick. The sedan uses about 49 ft (15 m) of 60-inch (1.52 m) cast film and the wagon uses up to 52 ft (16 m). A chrome or patterned film needs up to about 67 ft (20.5 m) because the pattern repeat adds waste. There is only one generation, so these figures hold for every year from 1989 to 1999.

Questions about wrapping a Lancia Dedra

How much vinyl does it take to wrap a Lancia Dedra?

A full wrap of a Lancia Dedra takes about 49 ft (15 m) of vinyl for the sedan and up to 52 ft (16 m) for the wagon. The estimate is for 60-inch (1.52 m) cast film on the newest body. The exact amount depends on the body style and how the film is cut.

Which Dedra body takes more film?

The Lancia Dedra wagon takes more film than the sedan. The sedan needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. The wagon uses up to 52 ft (16 m) because of the longer rear body and tailgate.

Can I wrap only the hood or the roof of a Dedra?

Yes, you can wrap only the hood or the roof of a Lancia Dedra. A partial wrap on the Dedra can be the roof, hood or mirror caps. The hood and roof are separate panels that an installer can cover without touching the doors or the tailgate.

Is a Dedra hard to wrap?

A Lancia Dedra is not the hardest car to wrap, but the wagon tailgate adds work. The tailgate has the rear glass set into it, so the film must end at the edge of the glass and be cut and tucked there. The size of the car, up to 171.0 in (4,343 mm) long, means that two installers often work together on the larger panels.