Wraps by car

Lancia Stratos wrap

The Lancia Stratos wrap page covers the first-generation 1973–1976 coupe in full. This one-generation catalog focuses on the classic two-door body. A complete color change wrap on this compact shape needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations11.5 mof film for a full wrap

Lancia Stratos, first generation, factory photo
Lancia Stratos, first generation. Factory color shown.

Lancia Stratos wrap colors and ideas

  • Stratos black wrap
  • Stratos white wrap
  • Stratos gray wrap
  • Stratos silver wrap
  • Stratos red wrap
  • Stratos blue wrap
  • Stratos green wrap
  • Stratos yellow wrap
  • Stratos orange wrap
  • Stratos purple wrap
  • Stratos pink wrap
  • Stratos teal wrap
  • Stratos brown wrap
  • Stratos gold wrap
  • Stratos chrome wrap
  • Stratos color shift wrap
  • Stratos carbon fiber wrap
  • Stratos camo and patterned wrap

How much vinyl to wrap a Lancia Stratos

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1973–1976coupe (2 doors)146.1 in (3,710 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Stratos wrap cost factors

Stratos wrap cost depends on the size and condition of the 1973–1976 coupe, not on a fixed price. The total area is small, but the two long side doors use large uncut sheets of film. Paint age on this classic body also changes the surface work before the film goes on.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Stratos wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Stratos, first generation, factory photo
Factory color shown

1973–1976 Stratos coupe (first generation)

1973–1976coupe (2 doors)146.1 in (3,710 mm)

The first-generation Lancia Stratos from 1973–1976 needs a paint check before any wrap. Panels may be original or repainted, and old paint can fail under film adhesion. A test spot on a low panel shows whether the surface will hold the film safely.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Stratos

Partial jobs on a Stratos include the roof, hood, and mirror caps wrapped separately. A Stratos chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end adds clear film to the nose and leading edges.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Stratos: body, cut-outs and film

The Lancia Stratos vinyl wrap starts with the short, low coupe body that measures 146.1 in (3,710 mm) long. The single body style has two long side doors, each a clean flat panel. This compact shape keeps the film count low for a full exterior wrap.

Stratos wrap ideas must account for the two long side doors, each one large piece of film. The door skins have no recessed handles or trim, so they wrap in one clean sheet. Installers keep the long side panels free of seams for the best finish.

To know how much vinyl to wrap a Stratos, count only the first generation produced from 1973 to 1976. There is one body style across these years, so the film estimate stays the same. A full wrap needs about 38 ft (11.5 m) of 60-inch (1.52 m) cast film on every coupe.

Questions about wrapping a Lancia Stratos

How much vinyl does it take to wrap a Lancia Stratos?

A Lancia Stratos takes about 38 ft (11.5 m) of 60-inch (1.52 m) vinyl to wrap the full body. This figure covers the entire 1973–1976 coupe exterior with no chrome or patterned film added.

Can I wrap only the hood or the roof of a Stratos?

Yes, a Stratos can be wrapped with only the hood or the roof done as a partial wrap. The short panels are simple shapes and use less film than the whole car. Mirror caps are also a small separate job on this body.

Is a Stratos hard to wrap?

Yes, a Stratos is hard to wrap because the two long side doors each need one large piece of film. The body is only 146.1 in (3,710 mm) long, but those door panels demand a steady hand and no seams. Old paint on this classic body can also add surface preparation work.

How many generations of the Stratos does this page cover?

This page covers one generation of the Lancia Stratos, the coupe built from 1973 to 1976.