Wraps by car

Lancia Appia wrap

This page covers the Lancia Appia wrap, a specialist guide to vinyl wrap on the 1953–1963 Appia. The catalog lists one generation for this car. A full wrap of the newest body uses about 38 ft (11.5 m) for the convertible to 46 ft (14 m) for the wagon in 60-inch (1.52 m) cast film, or up to about 59 ft (18 m) with chrome or patterned film.

1generations11.5 mof film for a full wrap

Lancia Appia, first generation, factory photo
Lancia Appia, first generation. Factory color shown.

Lancia Appia wrap colors and ideas

  • Appia black wrap
  • Appia white wrap
  • Appia gray wrap
  • Appia silver wrap
  • Appia red wrap
  • Appia blue wrap
  • Appia green wrap
  • Appia yellow wrap
  • Appia orange wrap
  • Appia purple wrap
  • Appia pink wrap
  • Appia teal wrap
  • Appia brown wrap
  • Appia gold wrap
  • Appia chrome wrap
  • Appia color shift wrap
  • Appia carbon fiber wrap
  • Appia camo and patterned wrap

How much vinyl to wrap a Lancia Appia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1953–1963convertible, coupe, sedan, wagon (2 or 3 or 4 doors)152.2 in (3,865 mm)about 38 ft (11.5 m) for the convertible to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Appia wrap cost factors

Appia wrap cost depends on body style, film choice, and labor around details. A wagon takes about 46 ft (14 m) of cast film, while a convertible takes about 38 ft (11.5 m). Chrome or patterned film can push the film need to about 59 ft (18 m). Cut-outs for the tailgate or a folding hard top add installation time.

  • Film for a full wrap: about 38 ft (11.5 m) for the convertible to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, coupe, sedan, wagon (2 or 3 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Appia wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Appia, first generation, factory photo
Factory color shown

1953–1963 Appia convertible, coupe, sedan, wagon (first generation)

1953–1963convertible, coupe, sedan, wagon (2 or 3 or 4 doors)152.2 in (3,865 mm)

The open top of the Lancia Appia convertible is not wrapped, because fabric is not a suitable surface for vinyl. The film ends where the top begins, following the edge of the top well. A folding hard top is wrapped as its own panels, so the wrap is split into more pieces.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) for the convertible to 46 ft (14 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Appia

A partial wrap on the Lancia Appia can cover the roof, hood, or mirror caps. Appia chrome delete covers window trim and badges with black film, which is a smaller job than a full color change wrap. Paint protection film (PPF) is a clear film option for the front end. These jobs use less film and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Appia: body, cut-outs and film

The Lancia Appia vinyl wrap depends on four body styles: convertible, coupe, sedan, and wagon. The convertible needs the least film, and the wagon needs the most. A longer body and a taller roof use more vinyl. You should measure your exact car before ordering film.

Appia wrap ideas start with the convertible fabric top, which is not wrapped: the film ends where the top begins. A folding hard top is wrapped as panels of its own. On a wagon with a tailgate holding the rear glass, the film ends at the edge of the glass.

How much vinyl to wrap an Appia changes only with the body style, because the catalog has one generation. The sedan and coupe sit between the convertible and the wagon in film use. For the same body style, the estimate stays valid from 1953 to 1963. Counting film is easier without generation changes.

Questions about wrapping a Lancia Appia

How much vinyl does it take to wrap a Lancia Appia?

It takes about 38 ft (11.5 m) for a convertible to 46 ft (14 m) for a wagon with 60-inch (1.52 m) cast film. Chrome or patterned film can need up to about 59 ft (18 m). The exact amount depends on the body style of your Lancia Appia.

Is the top of an Appia wrapped?

No, the convertible top of an Appia is not wrapped. The film ends where the fabric top begins. A folding hard top is wrapped as panels of its own, not as one continuous sheet.

Which Appia body takes more film?

The wagon takes more film than the convertible, coupe, or sedan. A wagon needs about 46 ft (14 m) of cast film, while a convertible needs about 38 ft (11.5 m). The wagon's extra roof and tailgate area explain the difference.

Can I wrap only the hood or the roof of an Appia?

Yes, you can wrap only the hood or the roof of an Appia. A partial wrap on this car can cover the roof, hood, or mirror caps. You can also choose Appia chrome delete for window trim and badges.