Wraps by car

Lancia Flaminia wrap

The Lancia Flaminia wrap guide covers this 1952 to 1970 model with classic body styles. A full vinyl wrap on one of these cars takes measured film for its shape. The film estimate ranges from about 46 ft (14 m) for the convertible to 59 ft (18 m) for the sedan, using 60-inch (1.52 m) cast film.

1generations14 mof film for a full wrap

Lancia Flaminia, first generation, factory photo
Lancia Flaminia, first generation. Factory color shown.

Lancia Flaminia wrap colors and ideas

  • Flaminia black wrap
  • Flaminia white wrap
  • Flaminia gray wrap
  • Flaminia silver wrap
  • Flaminia red wrap
  • Flaminia blue wrap
  • Flaminia green wrap
  • Flaminia yellow wrap
  • Flaminia orange wrap
  • Flaminia purple wrap
  • Flaminia pink wrap
  • Flaminia teal wrap
  • Flaminia brown wrap
  • Flaminia gold wrap
  • Flaminia chrome wrap
  • Flaminia color shift wrap
  • Flaminia carbon fiber wrap
  • Flaminia camo and patterned wrap

How much vinyl to wrap a Lancia Flaminia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1952–1970convertible, coupe, sedan (2 or 4 doors)177.0 in (4,496 mm) to 192.0 in (4,877 mm)about 46 ft (14 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Flaminia wrap cost factors

The Flaminia wrap cost depends on the size of the body and the film type you pick. A longer sedan needs more film than a convertible, up to about 59 ft (18 m) against 46 ft (14 m). Chrome or patterned film can raise the total to about 69 ft (21 m) with the same 60-inch (1.52 m) width. Extra prep work like removing old paint or trim also changes the labor.

  • Film for a full wrap: about 46 ft (14 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Flaminia wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Flaminia, first generation, factory photo
Factory color shown

1952–1970 Flaminia convertible, coupe, sedan (first generation)

1952–1970convertible, coupe, sedan (2 or 4 doors)177.0 in (4,496 mm) to 192.0 in (4,877 mm)

The first generation Lancia Flaminia was built from 1952 to 1970 as a convertible, coupe or sedan. On the open top cars, the fabric top is never covered with wrap film. The film ends cleanly where the soft top begins, so the edge is tucked into the body line. A folding hard top is treated like separate panels and wrapped on its own surfaces.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 46 ft (14 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Flaminia

A Flaminia chrome delete covers bright window trim and badges with black film for a darker look. A partial wrap can be just the roof, hood or mirror caps instead of the whole body. Paint protection film (PPF) is a clear film put on the front end to guard the paint from stone chips. These smaller jobs use less material and let you change one area without wrapping the full car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Flaminia: body, cut-outs and film

The Lancia Flaminia vinyl wrap depends on which body style you have. The convertible, coupe and sedan differ in length from 177.0 in (4,496 mm) to 192.0 in (4,877 mm). A longer sedan needs more film than the shorter convertible because of the larger roof and rear panels. Counting every panel before cutting avoids running short on film.

Flaminia wrap ideas start with the parts that need cut-outs or come off the car. Door handles, badges and trim are removed so the film can be tucked behind them. The fabric top on a convertible is not wrapped and the film ends where it begins. If a folding hard top is fitted, it is wrapped as its own separate panels.

How much vinyl to wrap a Flaminia changes with the body style and film width. A 60-inch (1.52 m) roll is the standard for cast film on this car. The convertible uses about 46 ft (14 m) while the sedan needs about 59 ft (18 m). A coupe sits between those figures, so measuring the actual body is the safe step.

Questions about wrapping a Lancia Flaminia

How much vinyl does it take to wrap a Lancia Flaminia?

A Lancia Flaminia takes about 46 ft (14 m) to 59 ft (18 m) of 60-inch (1.52 m) cast film, depending on body style. The convertible is at the low end and the sedan at the high end. A coupe falls in between those two figures.

Is the top of a Flaminia wrapped?

No, the fabric top of a Flaminia convertible is not wrapped. The film ends where the soft top begins and is tucked at that edge. A folding hard top is wrapped as its own set of panels.

Which Flaminia body takes more film?

The sedan takes more film than the convertible on a Flaminia. It needs about 59 ft (18 m) of 60-inch (1.52 m) film against about 46 ft (14 m) for the convertible. The coupe uses an amount between those two.

Can I wrap only the hood or the roof of a Flaminia?

Yes, you can wrap only the hood or the roof of a Flaminia. A partial wrap covers one of those areas or the mirror caps. A chrome delete is a similar focused job for the window trim and badges.