Wraps by car

Lancia Trevi wrap

The Lancia Trevi wrap page covers the first generation sedan produced from 1980 to 1984. A full vinyl wrap of this mid-size sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 61 ft (18.5 m).

1generations14.5 mof film for a full wrap

Lancia Trevi, first generation, factory photo
Lancia Trevi, first generation. Factory color shown.

Lancia Trevi wrap colors and ideas

  • Trevi black wrap
  • Trevi white wrap
  • Trevi gray wrap
  • Trevi silver wrap
  • Trevi red wrap
  • Trevi blue wrap
  • Trevi green wrap
  • Trevi yellow wrap
  • Trevi orange wrap
  • Trevi purple wrap
  • Trevi pink wrap
  • Trevi teal wrap
  • Trevi brown wrap
  • Trevi gold wrap
  • Trevi chrome wrap
  • Trevi color shift wrap
  • Trevi carbon fiber wrap
  • Trevi camo and patterned wrap

How much vinyl to wrap a Lancia Trevi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1980–1984sedan (4 doors)170.1 in (4,320 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Trevi wrap cost factors

Trevi wrap cost depends mainly on the condition of the car's paint and the film type chosen. The sedan's 170.1 in (4,320 mm) length and four-door layout set a baseline of about 48 ft (14.5 m) of cast film for a color change. Chrome or patterned film adds about 13 ft (4 m) to the material needed. Paint condition on a car of these years can require extra preparation before wrapping.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Trevi wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Trevi, first generation, factory photo
Factory color shown

1980–1984 Trevi sedan (first generation)

1980–1984sedan (4 doors)170.1 in (4,320 mm)

The first generation Lancia Trevi sedan was produced from 1980 to 1984. Panels on this car may be original or repainted after decades of use. A test spot on each panel comes before a full wrap to check paint adhesion. This step prevents lifting or damage when the film is removed.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Trevi

Partial wrap options for the Trevi include the roof, hood, and mirror caps. Trevi chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear film on the front end guards against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Trevi: body, cut-outs and film

A Lancia Trevi vinyl wrap starts with the single four-door sedan body style offered throughout its production. The car measures 170.1 in (4,320 mm) in length, which places it in the mid-size class. Its boxy shape and defined lines help keep film usage predictable for a full wrap. The four doors and separate trunk lid add seams but do not change the overall film estimate.

Trevi wrap ideas begin with the body panels that need cut-outs or removal. The door handles, mirrors, and badges should be removed before wrapping for clean edges. The front and rear bumpers wrap better off the car, and the window trim benefits from careful masking. A test spot on older paint helps confirm adhesion before the full wrap.

For someone counting how much vinyl to wrap a Trevi, only one generation exists in this catalog. The car was built from 1980 to 1984 with no major body changes between those years. Film estimates remain the same for all Trevi sedans in that period. Any trim or color option from the factory does not alter the amount of film needed.

Questions about wrapping a Lancia Trevi

How much vinyl does it take to wrap a Lancia Trevi?

A full wrap of a Lancia Trevi takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 61 ft (18.5 m). The sedan's four-door, mid-size body sets this figure for the single 1980–1984 generation.

Can I wrap only the hood or the roof of a Trevi?

Yes, you can wrap only the hood or the roof of a Trevi. Partial wrap jobs on this car include the roof, hood, and mirror caps as standalone options. Chrome delete for window trim and badges is another smaller job. These choices let you change the look without a full wrap.

Is a Trevi hard to wrap?

A Trevi is not the hardest car to wrap, but its age adds work. The wrap installer must check every panel for original or repainted paint and run a test spot. The boxy body and 170.1 in (4,320 mm) length are straightforward, but cut-outs around trim and badges take time. Removing door handles and mirrors also adds steps.

How many generations of the Trevi does this page cover?

This page covers one generation of the Trevi. The first generation sedan ran from 1980 to 1984 with no other generations in the catalog. All film estimates on this page refer to that single body style.