Wraps by car

Lancia Gamma wrap

The Lancia Gamma wrap page covers the first generation produced from 1976 to 1984 in one catalog generation. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Lancia Gamma, first generation, factory photo
Lancia Gamma, first generation. Factory color shown.

Lancia Gamma wrap colors and ideas

  • Gamma black wrap
  • Gamma white wrap
  • Gamma gray wrap
  • Gamma silver wrap
  • Gamma red wrap
  • Gamma blue wrap
  • Gamma green wrap
  • Gamma yellow wrap
  • Gamma orange wrap
  • Gamma purple wrap
  • Gamma pink wrap
  • Gamma teal wrap
  • Gamma brown wrap
  • Gamma gold wrap
  • Gamma chrome wrap
  • Gamma color shift wrap
  • Gamma carbon fiber wrap
  • Gamma camo and patterned wrap

How much vinyl to wrap a Lancia Gamma

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1976–1984coupe (2 or 4 doors)176.6 in (4,485 mm) to 180.3 in (4,580 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Gamma wrap cost factors

Gamma wrap cost depends mainly on the size of the mid-size coupe body at 176.6 in (4,485 mm) to 180.3 in (4,580 mm) long and the amount of film it requires. The estimate of about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap is the base quantity. The final cost also changes with film type, paint condition, and how many parts are removed.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 or 4 doors).

Gamma wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Gamma, first generation, factory photo
Factory color shown

1976–1984 Gamma coupe (first generation)

1976–1984coupe (2 or 4 doors)176.6 in (4,485 mm) to 180.3 in (4,580 mm)

The first generation Lancia Gamma was built from 1976 to 1984 as a coupe with two or four doors. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. The wrap film bonds differently to old paint, and any loose or cracked areas must be addressed first.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Gamma

A partial wrap on a Lancia Gamma can cover the roof, the hood, or the mirror caps as a smaller color change. Gamma chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) can be applied to the front end to protect the nose, hood edge, and mirror backs.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Gamma: body, cut-outs and film

A Lancia Gamma vinyl wrap follows the mid-size coupe body that is between 176.6 in (4,485 mm) and 180.3 in (4,580 mm) long. The coupe body has two or four doors, and each door needs film cut around the handles and edges. The roof and hood are large flat panels that use film efficiently.

Gamma wrap ideas start with the long doors and the window trim, which is a natural place for chrome delete with black film. The door handles, mirrors, and badges come off or are cut out so the film sits clean. The front and rear bumpers are wrapped as separate panels.

How much vinyl to wrap a Gamma depends on the body length, which ranges from 176.6 in (4,485 mm) to 180.3 in (4,580 mm). A complete color change on any first-generation Gamma is estimated at about 49 ft (15 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 61 ft (18.5 m).

Questions about wrapping a Lancia Gamma

How much vinyl does it take to wrap a Lancia Gamma?

About 49 ft (15 m) of 60-inch (1.52 m) cast film is needed to wrap a Lancia Gamma. That figure is for a full color change on the newest first-generation body without chrome or patterned film. If those films are used, the estimate rises to about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Gamma?

Yes, you can wrap only the hood or the roof of a Gamma. A partial wrap covers the roof, hood, or mirror caps. Chrome delete is another smaller job that wraps the window trim and badges in black film.

Is a Gamma hard to wrap?

A Gamma is not especially hard to wrap, but its mid-size coupe body at up to 180.3 in (4,580 mm) long adds work because of the large panels. The two-door or four-door coupe shape means long doors and a long roofline to handle. Paint age can also add preparation time if the surface is not smooth.

How many generations of the Gamma does this page cover?

This page covers one generation of the Lancia Gamma. The first generation is the only body in the catalog, produced from 1976 to 1984 as a coupe with two or four doors.