Wraps by car

Lancia Delta wrap

The Lancia Delta wrap page covers all three generations of the Delta in the catalog, from 1979 to 2014. The newest Delta body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap. A chrome or patterned vinyl wrap on that body needs about 67 ft (20.5 m).

3generations17.5 mof film for a full wrap

Lancia Delta, third generation, factory photo
Lancia Delta, third generation. Factory color shown.

Lancia Delta wrap colors and ideas

  • Delta black wrap
  • Delta white wrap
  • Delta gray wrap
  • Delta silver wrap
  • Delta red wrap
  • Delta blue wrap
  • Delta green wrap
  • Delta yellow wrap
  • Delta orange wrap
  • Delta purple wrap
  • Delta pink wrap
  • Delta teal wrap
  • Delta brown wrap
  • Delta gold wrap
  • Delta chrome wrap
  • Delta color shift wrap
  • Delta carbon fiber wrap
  • Delta camo and patterned wrap

How much vinyl to wrap a Lancia Delta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2014hatchback (5 doors)178.0 in (4,520 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1993–1999hatchback (3 or 5 doors)157.9 in (4,011 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1979–1994hatchback (5 doors)153.5 in (3,900 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Delta wrap cost factors

Delta wrap cost depends on the size of the body, the vinyl film chosen, and the installer's labor. The largest body is the third generation at 178.0 in (4,520 mm) long, while the first generation is 153.5 in (3,900 mm). A chrome or patterned film takes more material than a solid color because of pattern matching. The second generation's three-door body uses less film than its five-door version.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2011: bumpers and lights differ between the versions, and so do the film cuts.

Delta wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Delta, third generation, factory photo
Factory color shown

2008–2014 Delta hatchback (third generation)

2008–2014hatchback (5 doors)178.0 in (4,520 mm)

The third generation Lancia Delta was built from 2008 to 2014 and restyled in 2011. The restyling changed the bumpers and lights, so film cut for the earlier version does not fit the later one. This body has the tailgate with the rear glass in it, so film ends at the edge of the glass. A full wrap of this body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Lancia Delta, second generation, factory photo
Factory color shown

1993–1999 Delta hatchback (second generation)

1993–1999hatchback (3 or 5 doors)157.9 in (4,011 mm)

The second generation Lancia Delta was built from 1993 to 1999 as a three-door or five-door hatchback. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. This generation is 157.9 in (4,011 mm) long and takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The tailgate with the rear glass in it needs careful trimming around the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Lancia Delta, first generation, factory photo
Factory color shown

1979–1994 Delta hatchback (first generation)

1979–1994hatchback (5 doors)153.5 in (3,900 mm)

The first generation Lancia Delta was built from 1979 to 1994 as a five-door hatchback. Its years overlap with the newer body from 1993 to 1994, so the owner of a car from those years checks which body it is. This generation is 153.5 in (3,900 mm) long and takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. The tailgate with the rear glass in it means the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Delta

A partial wrap on a Lancia Delta covers the roof, hood, or mirror caps. Delta chrome delete means covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the Delta. These smaller jobs use less vinyl and can be done without wrapping the entire car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lancia Delta: body, cut-outs and film

The Lancia Delta vinyl wrap film amount depends on the body style and the size of each generation. The third generation is a five-door hatchback with an overall length of 178.0 in (4,520 mm). The first generation is also a five-door hatchback, but at 153.5 in (3,900 mm) it needs less vinyl. The second generation has three-door and five-door hatchback bodies at 157.9 in (4,011 mm).

Delta wrap ideas for every generation include extra allowance for the tailgate with the rear glass in it. The vinyl film ends at the edge of the glass on that tailgate. You may also plan time for removing badges and trim for a clean installation. The door handles on the Delta are standard cut-out areas.

To work out how much vinyl to wrap a Delta, compare the body codes and lengths across all three generations. The first generation from 1979–1994 uses code 831 and is the shortest at 153.5 in (3,900 mm). The second generation from 1993–1999 uses code 836 and is 157.9 in (4,011 mm) long. The third generation from 2008–2014 uses code 844 and is the longest at 178.0 in (4,520 mm).

Questions about wrapping a Lancia Delta

How much vinyl does it take to wrap a Lancia Delta?

A full wrap of the newest Lancia Delta takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl film. If you use chrome or patterned film, plan for about 67 ft (20.5 m). The first and second generations take slightly less material due to their shorter bodies.

Which years of the Delta take the same film cuts?

The third generation Lancia Delta from 2008 to 2010 and from 2011 to 2014 take different film cuts. The restyling in 2011 changed the bumpers and lights, so film cut for one version does not fit the other. The first and second generations each have their own unique body codes and dimensions.

Can I wrap only the hood or the roof of a Delta?

Yes, you can wrap only the hood or the roof of a Lancia Delta. A partial wrap can cover the roof, hood, or mirror caps. Delta chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end.

Is a Delta hard to wrap?

The Lancia Delta has a tailgate with the rear glass in it, so the film ends at the edge of the glass. That adds extra trimming work compared to a separate tailgate and glass. The compact size of the Delta also means fewer square feet of film, but the same number of cut-outs as a larger car.