Wraps by car

Lancia Lambda wrap

The Lancia Lambda wrap page covers the single generation produced from 1922 to 1931. This generation includes convertible, coupe, and sedan body styles in two or four doors. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, using 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Lancia Lambda, first generation, factory photo
Lancia Lambda, first generation. Factory color shown.

Lancia Lambda wrap colors and ideas

  • Lambda black wrap
  • Lambda white wrap
  • Lambda gray wrap
  • Lambda silver wrap
  • Lambda red wrap
  • Lambda blue wrap
  • Lambda green wrap
  • Lambda yellow wrap
  • Lambda orange wrap
  • Lambda purple wrap
  • Lambda pink wrap
  • Lambda teal wrap
  • Lambda brown wrap
  • Lambda gold wrap
  • Lambda chrome wrap
  • Lambda color shift wrap
  • Lambda carbon fiber wrap
  • Lambda camo and patterned wrap

How much vinyl to wrap a Lancia Lambda

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1922–1931convertible, coupe, sedan (2 or 4 doors)181.1 in (4,600 mm)about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Lambda wrap cost factors

Lambda wrap cost is based on the body style, the film type, and the amount of disassembly. A convertible, coupe, or sedan from 1922–1931 takes different amounts of material and labor. A full wrap uses about 54 ft (16.5 m) to 56 ft (17 m) of cast film, and more if you add chrome or patterned film. Paint condition and the number of cut-outs also change the work.

  • Film for a full wrap: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Lambda wraps by generation

Swipe sideways. Tap a card for the full description.

Lancia Lambda, first generation, factory photo
Factory color shown

1922–1931 Lambda convertible, coupe, sedan (first generation)

1922–1931convertible, coupe, sedan (2 or 4 doors)181.1 in (4,600 mm)

In the first generation Lancia Lambda, the open top of a convertible is not covered with vinyl wrap. The fabric roof stays as it is, and the film ends at the edge where the fabric begins. A folding hard top is treated like any other painted panel and gets wrapped on its own.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Lambda

A partial wrap on a Lancia Lambda can cover the roof, hood, or mirror caps without wrapping the whole car. A Lambda chrome delete covers window trim and badges with black film. Paint protection film (PPF) is another option, with clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Lancia Lambda: body, cut-outs and film

A Lancia Lambda vinyl wrap has to follow the long, flat sides and simple curves of a 1920s body. The car measures 181.1 in (4,600 mm), with body styles ranging from two-door convertibles to four-door sedans. The wrap material runs from about 54 ft (16.5 m) on a coupe to 56 ft (17 m) on a sedan for the same film width.

Lambda wrap ideas usually begin with removing trim and lights from the body. Handles, hinges, and badges come off so the film can sit flat behind them. A convertible body has a fabric top that is not wrapped and the film ends where the fabric begins. A folding hard top is wrapped as separate panels of its own.

How much vinyl to wrap a Lambda depends on which body style you own. All cars in this generation share the same overall length, so the difference is in roof and door count. The coupe needs about 54 ft (16.5 m) of 60-inch film, while the sedan needs about 56 ft (17 m). Chrome or patterned film can push the total up to about 66 ft (20 m).

Questions about wrapping a Lancia Lambda

How much vinyl does it take to wrap a Lancia Lambda?

A Lancia Lambda takes about 54 ft (16.5 m) of film for a coupe to 56 ft (17 m) for a sedan with 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film can require up to about 66 ft (20 m).

Is the top of a Lambda wrapped?

No, the fabric top of a Lambda convertible is not wrapped. The film ends where the fabric begins. A folding hard top is wrapped as its own panels.

Which Lambda body takes more film?

The sedan takes more film than the coupe in the Lancia Lambda range. The sedan needs about 56 ft (17 m), while the coupe needs about 54 ft (16.5 m) of 60-inch cast film.

Can I wrap only the hood or the roof of a Lambda?

Yes, you can wrap only the hood or the roof of a Lambda. A partial wrap can also include the mirror caps. A chrome delete covers the window trim and badges, and paint protection film is applied to the front end.