Wraps by car

Plymouth Barracuda wrap

The Plymouth Barracuda wrap covers the entire 1964–1974 first generation with vinyl wrap. This single-generation catalog includes the convertible and two-door coupe body styles. A full wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

1generations16 mof film for a full wrap

Plymouth Barracuda, first generation, factory photo
Plymouth Barracuda, first generation. Factory color shown.

Plymouth Barracuda wrap colors and ideas

  • Barracuda black wrap
  • Barracuda white wrap
  • Barracuda gray wrap
  • Barracuda silver wrap
  • Barracuda red wrap
  • Barracuda blue wrap
  • Barracuda green wrap
  • Barracuda yellow wrap
  • Barracuda orange wrap
  • Barracuda purple wrap
  • Barracuda pink wrap
  • Barracuda teal wrap
  • Barracuda brown wrap
  • Barracuda gold wrap
  • Barracuda chrome wrap
  • Barracuda color shift wrap
  • Barracuda carbon fiber wrap
  • Barracuda camo and patterned wrap

How much vinyl to wrap a Plymouth Barracuda

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1974convertible, coupe (2 doors)186.6 in (4,740 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Barracuda wrap cost factors

A Barracuda wrap cost depends on the body style, the film type and the amount of surface preparation. The two-door convertible and coupe share the same length of 186.6 in (4,740 mm), but the convertible has a smaller wrapped area. Chrome or patterned film raises the material amount to about 59 ft (18 m).

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Barracuda wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Barracuda, first generation, factory photo
Factory color shown

1964–1974 Barracuda convertible, coupe (first generation)

1964–1974convertible, coupe (2 doors)186.6 in (4,740 mm)

On the open top of a Plymouth Barracuda, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own, so installers trim each panel to the roof edges. The rest of the body is wrapped as on the coupe.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Barracuda

A partial wrap on a Barracuda can cover the roof, hood, or mirror caps only. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Barracuda: body, cut-outs and film

A Plymouth Barracuda vinyl wrap must account for the car's 186.6 in (4,740 mm) length and two long side doors. Each door is one large piece of film, which makes the sides easier to install without seams. The convertible body ends the film where the fabric top begins, so the wrapped area is smaller than on a coupe.

Barracuda wrap ideas often start with the two long side doors, each wrapped as a single large piece. On a convertible body, the fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own, so masking lines stay clean around it.

To find how much vinyl to wrap a Barracuda, check the body style and the film type. A coupe needs film over the roof, while a convertible leaves the fabric top unwrapped. Chrome or patterned film adds about 7 ft (2 m) to the estimate for the first generation.

Questions about wrapping a Plymouth Barracuda

How much vinyl does it take to wrap a Plymouth Barracuda?

About 52 ft (16 m) of 60-inch (1.52 m) cast film wraps a Plymouth Barracuda. This estimate is for the newest body from 1964–1974 with standard color change film.

Is the top of a Barracuda wrapped?

No, the fabric top of a Barracuda is not wrapped. The film ends where the top begins, and a folding hard top is wrapped as panels of its own.

Which Barracuda body takes more film?

A Barracuda coupe takes more film than a convertible because the roof is wrapped. The convertible body ends the film at the fabric top, so the coupe uses about 52 ft (16 m) of film while the convertible uses less.

Can I wrap only the hood or the roof of a Barracuda?

Yes, you can wrap only the hood or the roof of a Barracuda. Hood wraps and roof wraps are standalone partial wrap jobs, or you can add chrome delete for the window trim and badges.