Wraps by car

Plymouth Valiant wrap

The Plymouth Valiant wrap page covers the Plymouth Valiant across three generations, from 1960 to 1973. A full vinyl wrap of the newest body, the 1967–1973 sedan, takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 66 ft (20 m).

3generations16 mof film for a full wrap

Plymouth Valiant, third generation, factory photo
Plymouth Valiant, third generation. Factory color shown.

Plymouth Valiant wrap colors and ideas

  • Valiant black wrap
  • Valiant white wrap
  • Valiant gray wrap
  • Valiant silver wrap
  • Valiant red wrap
  • Valiant blue wrap
  • Valiant green wrap
  • Valiant yellow wrap
  • Valiant orange wrap
  • Valiant purple wrap
  • Valiant pink wrap
  • Valiant teal wrap
  • Valiant brown wrap
  • Valiant gold wrap
  • Valiant chrome wrap
  • Valiant color shift wrap
  • Valiant carbon fiber wrap
  • Valiant camo and patterned wrap

How much vinyl to wrap a Plymouth Valiant

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1973sedan (2 or 4 doors)188.4 in (4,785 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1963–1966convertible, sedan, wagon (2 or 5 doors)——
1960–1962coupe, sedan (2 or 4 doors)183.9 in (4,670 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Valiant wrap cost factors

Valiant wrap cost depends on the size of the car, the number of panels and how much of the body is wrapped. For a first- or third-generation Valiant, a full wrap takes about 52 ft (16 m) of cast film, or up to 66 ft (20 m) with patterned film. Larger jobs like a full-color change need more hours of labor than a hood or roof wrap. Removing old paint or fixing rust is extra work before the film goes on.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (2 or 4 doors).

Valiant wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Valiant, third generation, factory photo
Factory color shown

1967–1973 Valiant sedan (third generation)

1967–1973sedan (2 or 4 doors)188.4 in (4,785 mm)

The third-generation Plymouth Valiant of 1967–1973 is a sedan with two or four doors and a length of 188.4 in (4,785 mm). Paint age matters on a car of these years, so panels may be original or repainted, and a test spot comes before a full wrap. A full wrap takes about 52 ft (16 m) of 60-inch cast film. Chrome or patterned film raises the film amount to about 66 ft (20 m).

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Plymouth Valiant, second generation, factory photo
Factory color shown

1963–1966 Valiant convertible, sedan, wagon (second generation)

1963–1966convertible, sedan, wagon (2 or 5 doors)

The second-generation Plymouth Valiant of 1963–1966 came as a convertible, sedan or wagon. A convertible body has a fabric top that is not wrapped, so the film ends where the top begins, while a folding hard top is wrapped as panels of its own. On a wagon, a tailgate with the rear glass in it means the film ends at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plymouth Valiant, first generation, factory photo
Factory color shown

1960–1962 Valiant coupe, sedan (first generation)

1960–1962coupe, sedan (2 or 4 doors)183.9 in (4,670 mm)

The first-generation Plymouth Valiant of 1960–1962 was offered as a coupe or sedan with two or four doors. The body style decides the panel plan and the film amount, and this generation is 183.9 in (4,670 mm) long. A full wrap takes about 52 ft (16 m) of 60-inch cast film, or about 64 ft (19.5 m) with chrome or patterned film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Valiant

A partial wrap on a Plymouth Valiant can cover the roof, hood or mirror caps instead of the full body. Valiant chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to shield the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Valiant: body, cut-outs and film

A Plymouth Valiant vinyl wrap covers a car that was built as a coupe, sedan, convertible or wagon, and the body style sets the panel plan. The third-generation sedan is 188.4 in (4,785 mm) long, while the first generation is 183.9 in (4,670 mm). A wagon tailgate with glass in it means the film stops at the edge of the glass. Fewer panels and a simpler roof line make the coupe and sedan a smaller job than the wagon.

Valiant wrap ideas start with the parts that leave the film or come off the car. Door handles, badges and trim are removed for a clean edge, and the tailgate glass on a wagon is cut around. On a second-generation convertible, the fabric top is not wrapped, so the film ends where the top begins. A folding hard top is wrapped as its own panels.

To know how much vinyl to wrap a Valiant, the generation matters because the first and third are close but not equal. The first-generation sedan is 183.9 in (4,670 mm) long and takes about 52 ft (16 m) of cast film, or about 64 ft (19.5 m) with chrome or patterned film. The third-generation sedan adds 4.5 inches in length but the same 52 ft (16 m) estimate, and 66 ft (20 m) for chrome or patterned film. A second-generation Valiant has no single figure here because the wagon and convertible change the panel count.

Questions about wrapping a Plymouth Valiant

How much vinyl does it take to wrap a Plymouth Valiant?

Yes, a Plymouth Valiant takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body, the 1967–1973 sedan. With chrome or patterned film, plan for about 66 ft (20 m).

Can I wrap only the hood or the roof of a Valiant?

Yes, you can wrap only the hood or the roof of a Valiant as a partial wrap. Mirror caps are another small job, and chrome delete can cover the window trim and badges in black film.

Is a Valiant hard to wrap?

No, a Valiant is not hard to wrap, but some parts add work. The second-generation convertible has a fabric top that is not wrapped, so the film ends where the top begins, and a wagon tailgate with glass in it means cutting around the glass. The first- and third-generation sedans are straightforward with a length of 183.9 in (4,670 mm) or 188.4 in (4,785 mm).

How many generations of the Valiant does this page cover?

This page covers three generations of the Plymouth Valiant, from 1960 to 1973. The first is 1960–1962, the second is 1963–1966 and the third is 1967–1973.