Wraps by car

Plymouth Sundance wrap

A Plymouth Sundance wrap covers one generation of this compact, sold from 1986 to 1994. A color change wrap of the newest body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film for the coupe. The liftback takes slightly more vinyl wrap, around 49 ft (15 m), and is offered with either two or five doors.

1generations14 mof film for a full wrap

Plymouth Sundance, first generation, factory photo
Plymouth Sundance, first generation. Factory color shown.

Plymouth Sundance wrap colors and ideas

  • Sundance black wrap
  • Sundance white wrap
  • Sundance gray wrap
  • Sundance silver wrap
  • Sundance red wrap
  • Sundance blue wrap
  • Sundance green wrap
  • Sundance yellow wrap
  • Sundance orange wrap
  • Sundance purple wrap
  • Sundance pink wrap
  • Sundance teal wrap
  • Sundance brown wrap
  • Sundance gold wrap
  • Sundance chrome wrap
  • Sundance color shift wrap
  • Sundance carbon fiber wrap
  • Sundance camo and patterned wrap

How much vinyl to wrap a Plymouth Sundance

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1994coupe, liftback (2 or 5 doors)171.7 in (4,360 mm)about 46 ft (14 m) for the coupe to 49 ft (15 m) for the liftback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)

Sundance wrap cost factors

Sundance wrap cost depends on the body style, film type, and installation work. A liftback needs more film than a coupe, about 49 ft (15 m) versus 46 ft (14 m), so it costs more in material. Chrome or patterned film adds up to about 56 ft (17 m) of vinyl. Removing trim and working around the tailgate glass can also raise the total.

  • Film for a full wrap: about 46 ft (14 m) for the coupe to 49 ft (15 m) for the liftback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).
  • Body: coupe, liftback (2 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sundance wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Sundance, first generation, factory photo
Factory color shown

1986–1994 Sundance coupe, liftback (first generation)

1986–1994coupe, liftback (2 or 5 doors)171.7 in (4,360 mm)

The first generation Plymouth Sundance, produced 1986–1994, offers a coupe and a liftback. The coupe uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, and the liftback about 49 ft (15 m). A two-door liftback and a five-door liftback are both available. The body style decides the panel plan and the film amount.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the coupe to 49 ft (15 m) for the liftback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Sundance

A partial wrap on a Plymouth Sundance can cover the roof, hood, or mirror caps. A Sundance chrome delete covers window trim and badges with black film on this car. Paint protection film (PPF) is often installed as clear film on the front end of a Sundance.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Sundance: body, cut-outs and film

A Plymouth Sundance vinyl wrap follows the coupe and liftback body shapes. The coupe has two doors and a fixed roof, while the liftback includes a rear hatch and can have five doors. These styles change the panel plan and the amount of vinyl film needed.

For Sundance wrap ideas, the tailgate with its rear glass needs special attention. The film ends at the edge of the glass on the liftback, so the glass is masked and the vinyl is trimmed neatly around it. The door handles, mirrors, and badges are removed or cut out for a clean install.

To know how much vinyl to wrap a Sundance, measure by generation and body style. Only one generation exists, but coupe and liftback lengths are the same at 171.7 in (4,360 mm). The film estimate rises from 46 ft (14 m) for the coupe to 49 ft (15 m) for the liftback. The liftback tailgate adds more surface area to cover.

Questions about wrapping a Plymouth Sundance

How much vinyl does it take to wrap a Plymouth Sundance?

Yes, a Plymouth Sundance uses about 46 ft (14 m) of cast film for the coupe body style. For the liftback it takes about 49 ft (15 m) of 60-inch (1.52 m) film. Those figures cover a full color change wrap of the newest body.

Which Sundance body takes more film?

The Plymouth Sundance liftback takes more film than the coupe. The liftback needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the coupe needs about 46 ft (14 m). The liftback tailgate adds the extra surface area.

Can I wrap only the hood or the roof of a Sundance?

Yes, you can wrap only the hood or the roof of a Plymouth Sundance. A partial wrap of this car often includes the roof, hood, and mirror caps. Installers can also chrome delete the window trim and badges with black film.

Is a Sundance hard to wrap?

The Plymouth Sundance has one feature that adds work to a wrap install. The tailgate with the rear glass in it means the film must end at the edge of the glass on the liftback. The compact length of 171.7 in (4,360 mm) is standard, but the glass requires careful trimming.