Wraps by car

Plymouth Reliant wrap

A Plymouth Reliant wrap covers the mid-size sedan or wagon built from 1981 to 1989. This page holds one generation of the car and the film a full wrap of the newest body takes. A complete wrap needs about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon in 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to up to about 69 ft (21 m).

1generations15.5 mof film for a full wrap

Plymouth Reliant, first generation, factory photo
Plymouth Reliant, first generation. Factory color shown.

Plymouth Reliant wrap colors and ideas

  • Reliant black wrap
  • Reliant white wrap
  • Reliant gray wrap
  • Reliant silver wrap
  • Reliant red wrap
  • Reliant blue wrap
  • Reliant green wrap
  • Reliant yellow wrap
  • Reliant orange wrap
  • Reliant purple wrap
  • Reliant pink wrap
  • Reliant teal wrap
  • Reliant brown wrap
  • Reliant gold wrap
  • Reliant chrome wrap
  • Reliant color shift wrap
  • Reliant carbon fiber wrap
  • Reliant camo and patterned wrap

How much vinyl to wrap a Plymouth Reliant

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1989sedan, wagon (2 or 4 or 5 doors)176.2 in (4,475 mm) to 178.6 in (4,536 mm)about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Reliant wrap cost factors

Reliant wrap cost depends on the film amount, the body style, and the work on the tailgate glass. A wagon uses more film than a sedan, from about 51 ft (15.5 m) to 54 ft (16.5 m) in 60-inch (1.52 m) cast film. Chrome delete or patterned film raises the amount to up to about 69 ft (21 m). The installer also charges for removing door handles, mirrors, and badges and for trimming around the wagon tailgate glass.

  • Film for a full wrap: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Reliant wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Reliant, first generation, factory photo
Factory color shown

1981–1989 Reliant sedan, wagon (first generation)

1981–1989sedan, wagon (2 or 4 or 5 doors)176.2 in (4,475 mm) to 178.6 in (4,536 mm)

The first generation Plymouth Reliant offers a choice of sedan or wagon, and the body style decides the panel plan. A sedan wrap has a trunk lid and a fixed rear window, while the wagon tailgate holds the rear glass. The wagon needs more film on the roof and the tailgate than the sedan does. Both styles share the same front doors and fenders, so the front half of the wrap is the same.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Reliant

A partial wrap on a Plymouth Reliant covers the roof, hood, or mirror caps with vinyl film. A chrome delete wraps the window trim and badges with black film for a darker look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and suit owners who want a change without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Reliant: body, cut-outs and film

A Plymouth Reliant vinyl wrap follows the body style, because the sedan and wagon share the same wheelbase but differ at the rear. The sedan measures 176.2 in (4,475 mm) and the wagon reaches 178.6 in (4,536 mm), so the wagon adds only a little length. The wagon roof extends over the cargo area and needs more film than the sedan trunk lid. Both body styles sit in the mid-size class, so a wrap uses roughly the same panel plan as other cars of that size.

Reliant wrap ideas start with the tailgate, where the film ends at the edge of the rear glass set into the gate. The rear glass is part of the tailgate, so the installer trims the film cleanly around the glass edge. Door handles, mirrors, and badges come off for a neat wrap, and the bumpers need cut-outs for lights. A full wrap of the wagon tailgate takes more care than the sedan trunk because of the glass.

How much vinyl to wrap a Reliant depends on the body style, because the wagon tailgate adds area over the sedan. The first generation spans 1981 to 1989, and the body length changed only slightly between those years. Every body in this generation is a sedan or wagon, so the film amount stays within the same range. A wrapper counting film can use the same estimate for any year of this car.

Questions about wrapping a Plymouth Reliant

How much vinyl does it take to wrap a Plymouth Reliant?

A Plymouth Reliant wrap takes about 51 ft (15.5 m) for the sedan to 54 ft (16.5 m) for the wagon in 60-inch (1.52 m) cast film. The estimate includes the body panels but not the door jambs or the underside of the hood. Chrome or patterned film raises the total to up to about 69 ft (21 m) because of extra trimming and alignment. These figures come from the newest body of the single generation in this catalog.

Which Reliant body takes more film?

The wagon body of the Plymouth Reliant takes more film than the sedan. The wagon needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the sedan uses about 51 ft (15.5 m). The difference comes from the wagon tailgate and the longer roof over the cargo area. Both figures cover a full wrap of the body panels.

Can I wrap only the hood or the roof of a Reliant?

Yes, you can wrap only the hood or the roof of a Reliant as a partial wrap. A partial wrap covers the roof, hood, or mirror caps with vinyl film. A hood wrap protects the paint and changes the look without covering the whole car. A roof wrap is a simple way to add contrast on a sedan or wagon.

Is a Reliant hard to wrap?

A Reliant is not hard to wrap, but the wagon tailgate adds work because the rear glass is set into the gate. The installer must trim the film exactly at the edge of the glass, which takes more time. The car is mid-size, so the panels are straightforward, and only a few parts like mirrors and badges need removal. A sedan is slightly easier than a wagon because it has a separate trunk lid.