Wraps by car

Plymouth Breeze wrap

The Plymouth Breeze wrap page covers the mid-size sedan built from 1995 to 2000 in one generation. A full vinyl wrap of the Breeze takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Adding chrome or patterned film raises the estimate to about 66 ft (20 m).

1generations16 mof film for a full wrap

Plymouth Breeze, first generation, factory photo
Plymouth Breeze, first generation. Factory color shown.

Plymouth Breeze wrap colors and ideas

  • Breeze black wrap
  • Breeze white wrap
  • Breeze gray wrap
  • Breeze silver wrap
  • Breeze red wrap
  • Breeze blue wrap
  • Breeze green wrap
  • Breeze yellow wrap
  • Breeze orange wrap
  • Breeze purple wrap
  • Breeze pink wrap
  • Breeze teal wrap
  • Breeze brown wrap
  • Breeze gold wrap
  • Breeze chrome wrap
  • Breeze color shift wrap
  • Breeze carbon fiber wrap
  • Breeze camo and patterned wrap

How much vinyl to wrap a Plymouth Breeze

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000sedan (4 doors)186.7 in (4,742 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Breeze wrap cost factors

Breeze wrap cost depends on the amount of film in the kit, which the installer figures from the 186.7 in (4,742 mm) length. A color change takes about 52 ft (16 m) of standard film, while chrome or patterned film runs to 66 ft (20 m). The number of cut-outs on the four doors and the front bumper drives labor time. The condition of the paint from these years also decides how much prep work the job needs.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Breeze wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Breeze, first generation, factory photo
Factory color shown

1995–2000 Breeze sedan (first generation)

1995–2000sedan (4 doors)186.7 in (4,742 mm)

The first generation Plymouth Breeze from 1995 to 2000 carries paint that may be original or repainted by now. A test spot before a full wrap on a Breeze shows whether the film lifts old clear coat. Original single-stage paint on early cars can be chalky and needs a wash, clay, and light correction first. Repainted panels may have soft clear that a low-tack film handles better.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Breeze

A partial wrap of the Breeze can cover the roof, the hood, or the mirror caps in one color. Chrome delete on a Breeze covers the window trim and the badges with black film for a plain look. Paint protection film (PPF) on the Breeze adds clear film across the front end to stop stone chips. Each of these jobs uses less film and less labor than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Breeze: body, cut-outs and film

The Plymouth Breeze vinyl wrap suits a four-door sedan measuring 186.7 in (4,742 mm). The smooth body sides and simple bumper shapes keep film use close to the base estimate. The roof and hood are large flat panels that installers cover without heavy stretching. The trunk lid is tall and benefits from a single wide sheet.

Breeze wrap ideas start with removing the door handles, mirrors, badges, and trim before film goes on. The window moldings and door rub strips need cut-outs or come off for a clean edge. The front bumper has fog light openings on some trims that call for relief cuts. The tail lamps sit in recesses that need inlays around the lens edges.

Figuring how much vinyl to wrap a Breeze depends only on this first generation from 1995 to 2000. The body dimensions stay the same for every production year of the Breeze. Early cars may have unpainted black mirror housings that some owners wrap with the body color. Later cars use painted mirrors, so a kit for mirrors stays the same either way.

Questions about wrapping a Plymouth Breeze

How much vinyl does it take to wrap a Plymouth Breeze?

A Plymouth Breeze takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change wrap. That figure covers the sedan body with no chrome or patterned film. If the wrap uses chrome or patterned film, plan on about 66 ft (20 m).

Can I wrap only the hood or the roof of a Breeze?

Yes, you can wrap only the hood or the roof of a Breeze as a partial wrap. The roof and the hood are flat enough for a beginner to try with one wide sheet each. Mirror caps are another small job that uses leftover film from a bigger color change.

Is a Breeze hard to wrap?

The Breeze is a mid-size sedan with long flat sides, so the wrap itself is straightforward for a shop. The work comes from the cut-outs around the four door handles, the mirrors, and the front bumper openings. The rear bumper on the Breeze has a license plate recess that also needs relief cuts. The 186.7 in (4,742 mm) body length means the installer handles a 16 m roll in one pass.

How many generations of the Breeze does this page cover?

This page covers one generation of the Plymouth Breeze, built from 1995 to 2000. The Breeze never got a second generation during its production run. All body sizes and film estimates on this page refer to that first generation.