Wraps by car

Plymouth Caravelle wrap

The Plymouth Caravelle wrap covers a mid-size two-door coupe and four-door sedan built from 1983 to 1988. This guide covers the only generation in our catalog and assumes a vinyl wrap for the newest body. A full wrap of that body takes about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan. The film width is 60 inches (1.52 m) cast vinyl.

1generations15 mof film for a full wrap

Plymouth Caravelle, first generation, factory photo
Plymouth Caravelle, first generation. Factory color shown.

Plymouth Caravelle wrap colors and ideas

  • Caravelle black wrap
  • Caravelle white wrap
  • Caravelle gray wrap
  • Caravelle silver wrap
  • Caravelle red wrap
  • Caravelle blue wrap
  • Caravelle green wrap
  • Caravelle yellow wrap
  • Caravelle orange wrap
  • Caravelle purple wrap
  • Caravelle pink wrap
  • Caravelle teal wrap
  • Caravelle brown wrap
  • Caravelle gold wrap
  • Caravelle chrome wrap
  • Caravelle color shift wrap
  • Caravelle carbon fiber wrap
  • Caravelle camo and patterned wrap

How much vinyl to wrap a Plymouth Caravelle

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1988coupe, sedan (2 or 4 doors)185.2 in (4,704 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Caravelle wrap cost factors

The Caravelle wrap cost depends on the body style, film type and the condition of the panels. A coupe uses about 49 ft (15 m) and a sedan about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes up to about 64 ft (19.5 m). Surface prep and the number of cut-outs also change the labor time.

  • Film for a full wrap: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Caravelle wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Caravelle, first generation, factory photo
Factory color shown

1983–1988 Caravelle coupe, sedan (first generation)

1983–1988coupe, sedan (2 or 4 doors)185.2 in (4,704 mm)

The first generation Plymouth Caravelle was built from 1983 to 1988 as a coupe and a sedan with two or four doors. The body style decides the panel plan and the film amount for a wrap. A coupe takes about 49 ft (15 m) and a sedan about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The car is 185.2 in (4,704 mm) long and sits in the mid-size class.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Caravelle

A partial wrap on a Caravelle covers the roof, hood or mirror caps without wrapping the whole body. A chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end. These jobs suit the coupe and sedan alike.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Caravelle: body, cut-outs and film

A Plymouth Caravelle vinyl wrap starts with body styles that decide panel planning and film amount. The coupe has two doors and a more sloped rear glass area, while the sedan comes with two or four doors. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) film, and the sedan about 51 ft (15.5 m). Its length of 185.2 in (4,704 mm) makes it a mid-size car with long door and quarter panels.

Caravelle wrap ideas begin with the door handles, side mirrors and antenna, which need cut-outs or must come off the car. The wrap installer also removes badges and some trim pieces before laying film. The front and rear bumpers require heat and stretch to follow their contours. The coupe's rear window area has a larger sail panel than the sedan.

People ask how much vinyl to wrap a Caravelle, and the answer stays the same for the only generation. The coupe uses about 49 ft (15 m) and the sedan about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 64 ft (19.5 m). The difference comes from body style, not from the production years 1983 to 1988.

Questions about wrapping a Plymouth Caravelle

How much vinyl does it take to wrap a Plymouth Caravelle?

A Plymouth Caravelle takes about 49 ft (15 m) of film for the coupe and 51 ft (15.5 m) for the sedan, using 60-inch (1.52 m) cast vinyl. For chrome or patterned film, the estimate goes up to about 64 ft (19.5 m). The amount depends on the body style.

Which Caravelle body takes more film?

The sedan takes more film than the coupe. The sedan needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the coupe needs about 49 ft (15 m). The difference comes from the sedan's extra doors and roof area.

Can I wrap only the hood or the roof of a Caravelle?

Yes, you can wrap only the hood or the roof of a Caravelle. The partial wrap options for this car include the roof, hood and mirror caps, without doing the full body. A chrome delete on the window trim and badges is another smaller job.

Is a Caravelle hard to wrap?

A Caravelle is not especially hard to wrap, but its size adds work. The car is 185.2 in (4,704 mm) long, and the door handles, mirrors and antenna need cut-outs or removal. The bumpers need heat and stretch to follow their contours.