Wraps by car

Plymouth Voyager wrap

The Plymouth Voyager wrap page covers all three generations of this minivan, from 1984 to 2000. A full wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. Owners considering a vinyl wrap will find body dimensions and film estimates for each generation here.

3generations23 mof film for a full wrap

Plymouth Voyager, third generation, factory photo
Plymouth Voyager, third generation. Factory color shown.

Plymouth Voyager wrap colors and ideas

  • Voyager black wrap
  • Voyager white wrap
  • Voyager gray wrap
  • Voyager silver wrap
  • Voyager red wrap
  • Voyager blue wrap
  • Voyager green wrap
  • Voyager yellow wrap
  • Voyager orange wrap
  • Voyager purple wrap
  • Voyager pink wrap
  • Voyager teal wrap
  • Voyager brown wrap
  • Voyager gold wrap
  • Voyager chrome wrap
  • Voyager color shift wrap
  • Voyager carbon fiber wrap
  • Voyager camo and patterned wrap

How much vinyl to wrap a Plymouth Voyager

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000van (4 doors)199.6 in (5,070 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1991–1995van (4 doors)192.8 in (4,896 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
1984–1990van (4 doors)175.9 in (4,468 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Voyager wrap cost factors

Voyager wrap cost depends on the film amount, the labor for the sliding door tracks, and the condition of the paint. The largest body needs about 87 ft (26.5 m) of chrome or patterned film, while the smallest needs about 76 ft (23 m). The three generations have different body lengths, so the total cost varies with the exact year and the chosen film type.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Voyager wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Voyager, third generation, factory photo
Factory color shown

1995–2000 Voyager van (third generation)

1995–2000van (4 doors)199.6 in (5,070 mm)

The third generation Plymouth Voyager (1995–2000) has sliding side doors where the tracks stay bare and decide where the film is cut. This means the installer must trim the film along the track edges for a neat finish. The van body is 199.6 in (5,070 mm) long, and a full wrap uses about 76 ft (23 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Plymouth Voyager, second generation, factory photo
Factory color shown

1991–1995 Voyager van (second generation)

1991–1995van (4 doors)192.8 in (4,896 mm)

The second generation Plymouth Voyager (1991–1995) often has paint that is original or repainted, so a test spot comes before a full wrap. This checks adhesion on the aged surface and avoids lifting later. The body length is 192.8 in (4,896 mm), and a full wrap takes about 70 ft (21.5 m) of 60-inch (1.52 m) film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Plymouth Voyager, first generation, factory photo
Factory color shown

1984–1990 Voyager van (first generation)

1984–1990van (4 doors)175.9 in (4,468 mm)

The first generation Plymouth Voyager (1984–1990) has a compact size that reduces film needs and panel count compared to later vans. At 175.9 in (4,468 mm) long, it requires about 66 ft (20 m) of 60-inch (1.52 m) film for a full wrap. The boxy shape still includes sliding side doors, but the overall surface area is smaller.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Voyager

The Plymouth Voyager can receive a partial wrap that includes the roof, hood, and mirror caps, which covers the most visible flat areas. A chrome delete covers the window trim and badges with black film for a clean look. Paint protection film (PPF) can be applied to the front end to shield it from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Voyager: body, cut-outs and film

The Plymouth Voyager vinyl wrap is shaped by its boxy van body and four doors, which create large flat panels that use film efficiently. The third generation measures 199.6 in (5,070 mm), so a full wrap needs about 76 ft (23 m) of 60-inch (1.52 m) cast film. The flat sides and roof make for straightforward panel wrapping, but the tall body adds vertical surface area.

Voyager wrap ideas start with the sliding side doors, because their tracks stay bare and the film must be cut along them. The door handles, mirrors, and badges are removed for a clean install, and the window trim can be covered for a chrome delete. The large hood and roof are also separate panels that require careful handling.

How much vinyl to wrap a Voyager depends on the generation, since each body has a different length and panel count. The first generation at 175.9 in (4,468 mm) needs about 66 ft (20 m) of 60-inch (1.52 m) film, while the second generation at 192.8 in (4,896 mm) needs about 70 ft (21.5 m). The third generation is the longest, so it requires the most film.

Questions about wrapping a Plymouth Voyager

How much vinyl does it take to wrap a Plymouth Voyager?

A Plymouth Voyager takes about 76 ft (23 m) of 60-inch (1.52 m) cast film for the newest body, the third generation. This estimate assumes a full wrap without extra film for repairs or complex patterns. The exact amount depends on the van's length and whether you choose chrome or patterned film, which may need more material.

Are the sliding doors of a Voyager wrapped?

Yes, the sliding doors of a Voyager are wrapped, but the door tracks stay bare because the film would be cut by the sliding mechanism. The installer trims the film along the track edges for a clean transition. This is a standard part of wrapping any Voyager generation.

Can I wrap only the hood or the roof of a Voyager?

Yes, you can wrap only the hood or the roof of a Voyager, which are listed as partial wrap options along with mirror caps. A partial wrap lets you change the look without covering the entire van. The hood and roof are large, flat panels that are straightforward to wrap.

Is a Voyager hard to wrap?

A Voyager is not hard to wrap, but the sliding side doors add extra work because the door tracks stay bare and the film must be cut along them. The tall, boxy body also means more vertical surface area than a sedan. The third generation at 199.6 in (5,070 mm) is the largest and takes the most time to film.