Wraps by car

Plymouth Satellite wrap

The Plymouth Satellite wrap page covers the 1965–1967, 1968–1970, and 1970–1974 generations. The newest body takes about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the wagon in 60-inch (1.52 m) cast film. A chrome or patterned film full wrap can use up to about 82 ft (25 m).

3generations17.5 mof film for a full wrap

Plymouth Satellite, third generation, factory photo
Plymouth Satellite, third generation. Factory color shown.

Plymouth Satellite wrap colors and ideas

  • Satellite black wrap
  • Satellite white wrap
  • Satellite gray wrap
  • Satellite silver wrap
  • Satellite red wrap
  • Satellite blue wrap
  • Satellite green wrap
  • Satellite yellow wrap
  • Satellite orange wrap
  • Satellite purple wrap
  • Satellite pink wrap
  • Satellite teal wrap
  • Satellite brown wrap
  • Satellite gold wrap
  • Satellite chrome wrap
  • Satellite color shift wrap
  • Satellite carbon fiber wrap
  • Satellite camo and patterned wrap

How much vinyl to wrap a Plymouth Satellite

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1970–1974coupe, sedan, wagon (2 or 4 or 5 doors)203.0 in (5,156 mm)about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)
1968–1970convertible, coupe, sedan, wagon (2 or 4 or 5 doors)——
1965–1967convertible, coupe (2 doors)——

Satellite wrap cost factors

Satellite wrap cost depends on the body style and the film amount, not on a fixed price. A coupe needs about 56 ft (17 m) of 60-inch (1.52 m) film, while a wagon needs about 64 ft (19.5 m). Chrome or patterned film can raise the total to about 82 ft (25 m). The choice of solid, chrome, or patterned film also changes the work involved.

  • Film for a full wrap: about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).
  • Body: coupe, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Satellite wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Satellite, third generation, factory photo
Factory color shown

1970–1974 Satellite coupe, sedan, wagon (third generation)

1970–1974coupe, sedan, wagon (2 or 4 or 5 doors)203.0 in (5,156 mm)

The 1970–1974 Plymouth Satellite comes as a coupe, sedan, or wagon, and the style decides the panel plan and film amount. A coupe is the smallest job at about 56 ft (17 m) of 60-inch (1.52 m) film. A wagon is the largest at about 64 ft (19.5 m), with the sedan in between. The extra door on the sedan means one more door panel to cut and set.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the coupe to 64 ft (19.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Plymouth Satellite, second generation, factory photo
Factory color shown

1968–1970 Satellite convertible, coupe, sedan, wagon (second generation)

1968–1970convertible, coupe, sedan, wagon (2 or 4 or 5 doors)

The 1968–1970 Plymouth Satellite can be a convertible, and the open top is treated in a specific way in a wrap. A fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own, with seams at the panel gaps. The same rule applies to any convertible in this generation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plymouth Satellite, first generation, factory photo
Factory color shown

1965–1967 Satellite convertible, coupe (first generation)

1965–1967convertible, coupe (2 doors)

The 1965–1967 Plymouth Satellite is an older car, so paint age matters before a full wrap. Panels may be original or repainted, and a test spot should be done before the full wrap. The vinyl wrap sticks best to clean, well-cured paint. The first generation has only coupe and convertible bodies, so there are fewer panels to worry about.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Roof, hood, chrome delete and PPF on a Satellite

A partial wrap on a Plymouth Satellite can cover the roof, hood, or mirror caps. Satellite chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs are smaller than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Satellite: body, cut-outs and film

The Plymouth Satellite vinyl wrap changes with body style, because the coupe, sedan, and wagon present different surface areas. The coupe needs about 56 ft (17 m) of 60-inch (1.52 m) film, while the wagon reaches about 64 ft (19.5 m). The sedan sits between those two in film amount. Each panel is cut from a single piece of cast film for a clean result.

Satellite wrap ideas start with the parts that need cut-outs or come off. On the wagon and sedan, the tailgate holds the rear glass, so the film ends at the edge of the glass. On the convertible, a fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

To know how much vinyl to wrap a Satellite, check the generation, because the film amount changes between them. The first generation has only coupe and convertible bodies, so a full wrap uses less film than a later wagon. The second generation adds sedan and wagon styles, which raise the total. The third generation offers the longest body styles, so it takes the most film.

Questions about wrapping a Plymouth Satellite

How much vinyl does it take to wrap a Plymouth Satellite?

About 56 ft (17 m) to 64 ft (19.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Plymouth Satellite. The exact amount depends on the body style: the coupe takes about 56 ft (17 m), the wagon about 64 ft (19.5 m). A chrome or patterned film full wrap can use up to about 82 ft (25 m).

Which Satellite body takes more film?

The Plymouth Satellite wagon takes more film than the coupe or sedan. The wagon needs about 64 ft (19.5 m) of 60-inch (1.52 m) film, while the coupe needs about 56 ft (17 m). The sedan falls between those two amounts. The wagon's longer roof and taller tailgate add surface area.

Can I wrap only the hood or the roof of a Satellite?

Yes, you can wrap only the hood or the roof of a Satellite as a partial wrap. A partial wrap can also cover the mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end only.

Is a Satellite hard to wrap?

A Plymouth Satellite is not hard to wrap, but it has some specific challenges. The wagon and sedan have a tailgate with the rear glass in it, so the film ends at the edge of the glass. The convertible has a fabric top that is not wrapped, and a folding hard top is wrapped as separate panels. The car's size, up to 203.0 in (5,156 mm) long, means more film to handle.