Wraps by car

Plymouth Special DeLuxe wrap

This page covers the Plymouth Special DeLuxe wrap with cast vinyl wrap. The car was built for 1949 and 1950 in one generation. A full wrap of its newest body takes about 49 ft (15 m) for the convertible to 59 ft (18 m) for the sedan.

1generations15 mof film for a full wrap

Plymouth Special DeLuxe, first generation, factory photo
Plymouth Special DeLuxe, first generation. Factory color shown.

Plymouth Special DeLuxe wrap colors and ideas

  • Special DeLuxe black wrap
  • Special DeLuxe white wrap
  • Special DeLuxe gray wrap
  • Special DeLuxe silver wrap
  • Special DeLuxe red wrap
  • Special DeLuxe blue wrap
  • Special DeLuxe green wrap
  • Special DeLuxe yellow wrap
  • Special DeLuxe orange wrap
  • Special DeLuxe purple wrap
  • Special DeLuxe pink wrap
  • Special DeLuxe teal wrap
  • Special DeLuxe brown wrap
  • Special DeLuxe gold wrap
  • Special DeLuxe chrome wrap
  • Special DeLuxe color shift wrap
  • Special DeLuxe carbon fiber wrap
  • Special DeLuxe camo and patterned wrap

How much vinyl to wrap a Plymouth Special DeLuxe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1949–1950convertible, coupe, sedan, wagon (2 or 4 or 5 doors)186.5 in (4,737 mm)about 49 ft (15 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Special DeLuxe wrap cost factors

Special DeLuxe wrap cost depends on the body style and how much of the car is covered. The convertible uses about 49 ft (15 m) of film and the sedan about 59 ft (18 m). Removing trim on the wagon tailgate adds labor. Film with a pattern raises the cost because the installer must match it.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: convertible, coupe, sedan, wagon (2 or 4 or 5 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Special DeLuxe wraps by generation

Swipe sideways. Tap a card for the full description.

Plymouth Special DeLuxe, first generation, factory photo
Factory color shown

1949–1950 Special DeLuxe convertible, coupe, sedan, wagon (first generation)

1949–1950convertible, coupe, sedan, wagon (2 or 4 or 5 doors)186.5 in (4,737 mm)

The open top of the first generation Special DeLuxe is handled without wrapping the fabric. On a convertible, the film ends at the edge where the fabric top begins. A folding hard top is wrapped as panels of its own, not as one piece. The installer trims the film cleanly along the top of the doors.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the convertible to 59 ft (18 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Special DeLuxe

A partial wrap on a Special DeLuxe covers the roof, hood, or mirror caps only. Special DeLuxe chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film on the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Plymouth Special DeLuxe: body, cut-outs and film

A Plymouth Special DeLuxe vinyl wrap must fit four body styles and several door counts. The convertible, coupe, sedan, and wagon bodies are 186.5 in (4,737 mm) long. A wagon with a tailgate takes more film than a two-door coupe of the same length. The installer plans seams where the body panels meet.

Special DeLuxe wrap ideas start with the parts that need cut-outs or come off. A convertible body has a fabric top that is not wrapped and the film ends where the top begins. A tailgate with the rear glass in it gets film that ends at the edge of the glass. Door handles, badges, and trim are removed before the film goes on.

To know how much vinyl to wrap a Special DeLuxe, compare the body styles. The film estimate runs from about 49 ft (15 m) on the convertible to 59 ft (18 m) on the sedan. Chrome or patterned film adds material and can need up to about 67 ft (20.5 m). A 60-inch (1.52 m) cast film roll is used for all styles.

Questions about wrapping a Plymouth Special DeLuxe

How much vinyl does it take to wrap a Plymouth Special DeLuxe?

It takes about 49 ft (15 m) on the convertible up to 59 ft (18 m) on the sedan to wrap a Plymouth Special DeLuxe. The estimate is for a full wrap with 60-inch (1.52 m) cast film. Chrome or patterned film can need up to about 67 ft (20.5 m).

Is the top of a Special DeLuxe wrapped?

No, the fabric top of a Special DeLuxe is not wrapped. The film ends where the fabric begins on a convertible body. A folding hard top is wrapped as panels of its own.

Which Special DeLuxe body takes more film?

The sedan takes more film than the convertible in the Special DeLuxe line. The sedan uses about 59 ft (18 m) and the convertible about 49 ft (15 m). The coupe and wagon fall between or near these figures.

Can I wrap only the hood or the roof of a Special DeLuxe?

Yes, you can wrap only the hood or the roof of a Special DeLuxe. A partial wrap on this car covers the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film.