Wraps by car

Pontiac Aztek wrap

This page covers the Pontiac Aztek wrap for the 2001–2005 SUV. The Aztek came in one generation sold from 2001 through 2005. A full vinyl wrap on this body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 70 ft (21.5 m).

1generations19 mof film for a full wrap

Pontiac Aztek, first generation, factory photo
Pontiac Aztek, first generation. Factory color shown.

Pontiac Aztek wrap colors and ideas

  • Aztek black wrap
  • Aztek white wrap
  • Aztek gray wrap
  • Aztek silver wrap
  • Aztek red wrap
  • Aztek blue wrap
  • Aztek green wrap
  • Aztek yellow wrap
  • Aztek orange wrap
  • Aztek purple wrap
  • Aztek pink wrap
  • Aztek teal wrap
  • Aztek brown wrap
  • Aztek gold wrap
  • Aztek chrome wrap
  • Aztek color shift wrap
  • Aztek carbon fiber wrap
  • Aztek camo and patterned wrap

How much vinyl to wrap a Pontiac Aztek

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2005SUV (5 doors)182.1 in (4,625 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Aztek wrap cost factors

Aztek wrap cost depends on the size of the body, the amount of film used, and the labor for its tall panels. A full wrap needs about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) for chrome or patterned film. The tailgate with glass, roof rails, and cladding add time for a clean install. The shape of the front and rear bumpers also affects how much vinyl is used.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Aztek wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Aztek, first generation, factory photo
Factory color shown

2001–2005 Aztek SUV (first generation)

2001–2005SUV (5 doors)182.1 in (4,625 mm)

For the first generation Pontiac Aztek (2001–2005), paint age matters before a wrap because panels may be original or repainted. On this car of these years, a test spot comes before a full wrap to check that the vinyl adheres well. Installers examine the hood, roof, and doors for rust or failing clear coat. The wrap will not hide deep scratches or dents, so surface preparation is key.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Aztek

On the Aztek, a partial wrap can cover the roof, hood, or mirror caps as smaller color change jobs. Chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the bumper, hood, and fenders. These jobs use less vinyl than a full wrap and are a good way to change the look of the Aztek.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Aztek: body, cut-outs and film

The Pontiac Aztek vinyl wrap is shaped by its five-door SUV body that is 182.1 in (4,625 mm) long. The tall sides and large tailgate add surface area, so a full wrap needs careful planning of seams. The bumpers and lower cladding are separate pieces that require more film than a simple sedan. Installers typically wrap the body in sections to manage the long, flat panels.

Aztek wrap ideas include working around the tailgate with the rear glass in it, where the film ends at the edge of the glass. The tailgate is a large moving panel, so the vinyl must be trimmed cleanly around the glass. Door handles, mirrors, and roof rails come off for a cleaner edge. The black plastic cladding on the lower body can be wrapped or left exposed.

How much vinyl to wrap an Aztek stays the same across the single generation sold from 2001 through 2005. The body was not redesigned during those years, so the film estimate does not change. For a full wrap, order about 62 ft (19 m) of standard cast film or about 70 ft (21.5 m) for chrome or patterned film. Buying a little extra allows for mistakes and panel alignment.

Questions about wrapping a Pontiac Aztek

How much vinyl does it take to wrap a Pontiac Aztek?

A full wrap on a Pontiac Aztek takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 70 ft (21.5 m).

Can I wrap only the hood or the roof of an Aztek?

Yes, you can wrap only the hood or the roof of an Aztek. A partial wrap can cover the roof, hood, or mirror caps as smaller color change jobs.

Is an Aztek hard to wrap?

The Aztek is not the easiest car to wrap because of its tall SUV body and the tailgate with rear glass. The tailgate film ends at the edge of the glass, which adds careful trimming. The length of 182.1 in (4,625 mm) means large panels that take time.

How many generations of the Aztek does this page cover?

This page covers one generation of the Aztek, sold from 2001 through 2005.