Wraps by car

Pontiac Fiero wrap

The Pontiac Fiero wrap page covers the single-generation sports car produced from 1984 to 1988. A full vinyl wrap of the Fiero uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 52 ft (16 m). The Fiero is a compact hatchback body that rewards careful film planning.

1generations14.5 mof film for a full wrap

Pontiac Fiero, first generation, factory photo
Pontiac Fiero, first generation. Factory color shown.

Pontiac Fiero wrap colors and ideas

  • Fiero black wrap
  • Fiero white wrap
  • Fiero gray wrap
  • Fiero silver wrap
  • Fiero red wrap
  • Fiero blue wrap
  • Fiero green wrap
  • Fiero yellow wrap
  • Fiero orange wrap
  • Fiero purple wrap
  • Fiero pink wrap
  • Fiero teal wrap
  • Fiero brown wrap
  • Fiero gold wrap
  • Fiero chrome wrap
  • Fiero color shift wrap
  • Fiero carbon fiber wrap
  • Fiero camo and patterned wrap

How much vinyl to wrap a Pontiac Fiero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1988hatchback (3 doors)160.3 in (4,072 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Fiero wrap cost factors

Fiero wrap cost depends on the size of the car, the film type, and the amount of trim work. The Fiero is 160.3 in (4,072 mm) long and needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film uses about 52 ft (16 m), and removing mirrors, badges, and handles adds labor time. A partial wrap or clear paint protection film (PPF) on the front end costs less than a full color change wrap.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Fiero wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Fiero, first generation, factory photo
Factory color shown

1984–1988 Fiero hatchback (first generation)

1984–1988hatchback (3 doors)160.3 in (4,072 mm)

The first generation Pontiac Fiero from 1984 to 1988 is the only generation this page covers. Paint age on a car of these years may be original or repainted, and a test spot comes before a full wrap to check adhesion. The hatchback body with three doors and a tailgate with rear glass is the only style offered. This generation established the Fiero as a small sports car with a simple panel layout for wrapping.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Fiero

A partial wrap on a Pontiac Fiero can cover the roof, the hood, or the mirror caps individually. A Fiero chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done one panel at a time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Fiero: body, cut-outs and film

A Pontiac Fiero vinyl wrap deals with a 160.3 in (4,072 mm) hatchback shape that is smaller than many modern sports cars. The three-door body keeps the panel count low, but the long side doors each need a single large piece of film. The tailgate includes the rear glass, so the film ends at the edge of the glass. A wrap installer can use the compact size to reduce wasted film on straight panel runs.

Fiero wrap ideas start with the two long side doors, each cut as one piece for a clean look. The tailgate has the rear glass built in, so the film is trimmed to the glass edge and no film goes over the glass. Installers remove the mirror caps, badges, and some trim for full coverage and to avoid lifting edges. The door handles and side markers also need cut-outs or removal for a tidy finish.

How much vinyl to wrap a Fiero depends on the single 1984–1988 generation, so there is no difference between generations to factor. The estimate of about 48 ft (14.5 m) of 60-inch (1.52 m) cast film fits every year of this body. A car with chrome or patterned film uses about 52 ft (16 m) because matching patterns adds waste. The compact size helps a careful installer stay close to these figures.

Questions about wrapping a Pontiac Fiero

How much vinyl does it take to wrap a Pontiac Fiero?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film is the estimate for a full wrap of a Pontiac Fiero. That figure suits the single-generation 1984–1988 hatchback body. If the film is chrome or has a pattern, the estimate goes up to about 52 ft (16 m). These numbers assume standard wrap techniques with film trimmed at panel edges.

Can I wrap only the hood or the roof of a Fiero?

Yes, you can wrap only the hood or the roof of a Fiero as a partial wrap. The partial wrap options for this car also include the mirror caps. A chrome delete on the window trim and badges is another small job. Paint protection film (PPF) on the front end offers clear protection without changing the color.

Is a Fiero hard to wrap?

A Fiero is not hard to wrap, but a few details add work. The two long side doors each need one large piece of film, which calls for a steady hand and a second person to help. The tailgate with the rear glass built in means the film ends at the edge of the glass, so trimming must be precise. At 160.3 in (4,072 mm) long, the car is compact enough for a straightforward full wrap.

How many generations of the Fiero does this page cover?

This page covers one generation of the Pontiac Fiero, produced from 1984 to 1988. The Fiero was not redesigned during its run, so every year shares the same hatchback body. All wrap estimates on this page apply to that single generation.