Wraps by car

Pontiac GTO wrap

The Pontiac GTO wrap page covers four generations of this muscle car, from the 1964 first generation to the 2004 fourth generation. A full vinyl wrap of the newest 2004-2006 coupe takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that car needs about 66 ft (20 m).

4generations16 mof film for a full wrap

Pontiac GTO, fourth generation, factory photo
Pontiac GTO, fourth generation. Factory color shown.

Pontiac GTO wrap colors and ideas

  • Pontiac GTO black wrap
  • Pontiac GTO white wrap
  • Pontiac GTO gray wrap
  • Pontiac GTO silver wrap
  • Pontiac GTO red wrap
  • Pontiac GTO blue wrap
  • Pontiac GTO green wrap
  • Pontiac GTO yellow wrap
  • Pontiac GTO orange wrap
  • Pontiac GTO purple wrap
  • Pontiac GTO pink wrap
  • Pontiac GTO teal wrap
  • Pontiac GTO brown wrap
  • Pontiac GTO gold wrap
  • Pontiac GTO chrome wrap
  • Pontiac GTO color shift wrap
  • Pontiac GTO carbon fiber wrap
  • Pontiac GTO camo and patterned wrap

How much vinyl to wrap a Pontiac GTO

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2006coupe (2 doors)189.8 in (4,821 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1974–1974liftback (3 doors)194.5 in (4,940 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1968–1973convertible, coupe (2 doors)200.5 in (5,093 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1964–1967convertible, coupe (2 doors)203.0 in (5,156 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Pontiac GTO wrap cost factors

Pontiac GTO wrap cost depends on the generation, the body style, and the film type. The fourth generation is the smallest at 189.8 in (4,821 mm) and uses the least film, about 52 ft (16 m) of cast film. The first generation is the longest at 203.0 in (5,156 mm) and, with a convertible body, needs care around the top. Chrome or patterned film adds material and labor on every generation.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Pontiac GTO wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac GTO, fourth generation, factory photo
Factory color shown

2004–2006 Pontiac GTO coupe (fourth generation)

2004–2006coupe (2 doors)189.8 in (4,821 mm)

The 2004-2006 Pontiac GTO is a coupe with two long side doors, each wrapped as one large piece. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body is 189.8 in (4,821 mm) long, and a full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Pontiac GTO, third generation, factory photo
Factory color shown

1974–1974 Pontiac GTO liftback (third generation)

1974–1974liftback (3 doors)194.5 in (4,940 mm)

The 1974 Pontiac GTO is a liftback with three doors and a tailgate that includes the rear glass. The tailgate means the film must end at the edge of the glass, adding a precise cut line. The car is 194.5 in (4,940 mm) long and needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The two long side doors are each one large piece of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Pontiac GTO, second generation, factory photo
Factory color shown

1968–1973 Pontiac GTO convertible, coupe (second generation)

1968–1973convertible, coupe (2 doors)200.5 in (5,093 mm)

The 1968-1973 Pontiac GTO offered convertible and coupe body styles, and the open top changes the wrap. On a convertible with a fabric top, the fabric is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own, separate from the body. The car is 200.5 in (5,093 mm) long, and a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Pontiac GTO, first generation, factory photo
Factory color shown

1964–1967 Pontiac GTO convertible, coupe (first generation)

1964–1967convertible, coupe (2 doors)203.0 in (5,156 mm)

The 1964-1967 Pontiac GTO came as a convertible or a coupe, and the style decides the panel plan and the film amount. A coupe wraps as a continuous body, while a convertible with a fabric top ends the film at the top edge. A folding hard top is wrapped as its own panels. The body is 203.0 in (5,156 mm) long and needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Pontiac GTO

A partial wrap on a Pontiac GTO can cover the roof, hood, or mirror caps. Chrome delete on this car covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect the paint. Each job uses only part of the material of a full wrap and can be done without wrapping the entire car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac GTO: body, cut-outs and film

A Pontiac GTO vinyl wrap depends on the body style and size of each generation. The fourth generation is a coupe with a length of 189.8 in (4,821 mm), while the first generation is 203.0 in (5,156 mm) long and offered convertible and coupe styles. The second generation also offered convertible and coupe styles, and the third generation was a liftback with a tailgate. These differences change the number of panels and the amount of film each car needs.

Pontiac GTO wrap ideas include planning for cut-outs and parts that come off during the wrap. Every generation has two long side doors, and each door is one large piece of film. The third generation's tailgate includes the rear glass, so the film ends at the edge of the glass. Convertible bodies on the first and second generations have a fabric top that is not wrapped; a folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Pontiac GTO changes between the four generations. The fourth generation needs about 52 ft (16 m) of film, while the third generation liftback needs about 57 ft (17.5 m) of the same 60-inch (1.52 m) cast film. The first and second generations each use about 54 ft (16.5 m). Chrome or patterned film takes more material, from about 61 ft (18.5 m) on a first generation to about 66 ft (20 m) on a fourth generation.

Questions about wrapping a Pontiac GTO

How much vinyl does it take to wrap a Pontiac GTO?

A Pontiac GTO full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film on the newest 2004-2006 coupe. This figure comes from the fourth generation film estimate. Chrome or patterned film on that body needs about 66 ft (20 m).

Can I wrap only the hood or the roof of a Pontiac GTO?

Yes, you can wrap only the hood or the roof of a Pontiac GTO. A partial wrap on this car can cover the roof, hood, or mirror caps. Chrome delete is another smaller job, covering window trim and badges with black film. Paint protection film on the front end is also a partial wrap option.

Is a Pontiac GTO hard to wrap?

A Pontiac GTO is not especially hard to wrap, but some parts add work. Every generation has two long side doors, and each door is one large piece of film that requires careful handling. The third generation's tailgate includes the rear glass, so the film must end at the edge of the glass. Convertible bodies on the first and second generations have a fabric top that is not wrapped, and the film ends where it begins.

How many generations of the Pontiac GTO does this page cover?

Four generations of the Pontiac GTO are covered on this page. The first generation is from 1964-1967, the second from 1968-1973, the third is 1974, and the fourth is 2004-2006. Each generation has its own body styles and film estimates.