Wraps by car

Pontiac Trans Sport wrap

The Pontiac Trans Sport wrap page covers both generations of this minivan and the vinyl wrap a full body takes. The first generation was built from 1989 to 1996, and the second from 1996 to 1999. A complete wrap of the newest body uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that estimate to about 82 ft (25 m).

2generations21.5 mof film for a full wrap

Pontiac Trans Sport, second generation, factory photo
Pontiac Trans Sport, second generation. Factory color shown.

Pontiac Trans Sport wrap colors and ideas

  • Trans Sport black wrap
  • Trans Sport white wrap
  • Trans Sport gray wrap
  • Trans Sport silver wrap
  • Trans Sport red wrap
  • Trans Sport blue wrap
  • Trans Sport green wrap
  • Trans Sport yellow wrap
  • Trans Sport orange wrap
  • Trans Sport purple wrap
  • Trans Sport pink wrap
  • Trans Sport teal wrap
  • Trans Sport brown wrap
  • Trans Sport gold wrap
  • Trans Sport chrome wrap
  • Trans Sport color shift wrap
  • Trans Sport carbon fiber wrap
  • Trans Sport camo and patterned wrap

How much vinyl to wrap a Pontiac Trans Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–1999van (5 doors)187.3 in (4,757 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1989–1996van (4 doors)194.7 in (4,946 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Trans Sport wrap cost factors

Trans Sport wrap cost is driven by the size of the minivan, the film quality, and the amount of cut work. A full wrap uses about 70 ft (21.5 m) of cast film on either generation, while chrome or patterned film needs up to 85 ft (26 m). The sliding door tracks and the many trims add labor time. The final figure also changes with the condition of the paint and how much prep the panels need.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Trans Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Trans Sport, second generation, factory photo
Factory color shown

1996–1999 Trans Sport van (second generation)

1996–1999van (5 doors)187.3 in (4,757 mm)

The second generation Pontiac Trans Sport is a five-door minivan built from 1996 to 1999. It is 187.3 in (4,757 mm) long and takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film for a full wrap. The sliding side door tracks stay bare, and the film is cut along them. That cut line sets the wrap pattern for each side of the van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Pontiac Trans Sport, first generation, factory photo
Factory color shown

1989–1996 Trans Sport van (first generation)

1989–1996van (4 doors)194.7 in (4,946 mm)

The first generation Pontiac Trans Sport is a four-door minivan produced from 1989 to 1996. At 194.7 in (4,946 mm) long it is the larger of the two bodies and needs about 70 ft (21.5 m) of standard cast film. On a car of these years the panels may be original or repainted, so a test spot comes before a full wrap. Any hidden paint issues will show up only after the film is applied.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Trans Sport

A partial wrap on the Pontiac Trans Sport can cover the roof, hood, or mirror caps without the full film estimate. A chrome delete turns the window trim and badges black, and paint protection film (PPF) adds clear film to the front end. These smaller jobs use less material and leave the sliding door areas untouched. They are a way to change the look of the van without wrapping the whole body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Trans Sport: body, cut-outs and film

A Pontiac Trans Sport vinyl wrap has to follow a large minivan body with few flat panels. The first generation is 194.7 in (4,946 mm) long, while the second is 187.3 in (4,757 mm). Both have five doors except the first generation, which has four doors because it uses one sliding door on the passenger side. The tall sides and long roof make full coverage a two-person job from start to finish.

Trans Sport wrap ideas usually start with the sliding side doors and what happens around their tracks. The door tracks stay bare, and the film is cut along them so the doors still open smoothly. The handles, mirrors, badges and lights are removed or masked before the film goes on. Working around these parts adds time to the installation.

How much vinyl to wrap a Trans Sport depends on the generation and the film pattern you choose. The second generation needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The first generation needs the same standard amount, but chrome or patterned film on that body calls for about 85 ft (26 m). The size difference between the two bodies is about 7 in (178 mm) in length.

Questions about wrapping a Pontiac Trans Sport

How much vinyl does it take to wrap a Pontiac Trans Sport?

A Pontiac Trans Sport takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. If the wrap uses chrome or patterned film, the estimate rises to about 82 ft (25 m). Those figures cover the second generation built from 1996 to 1999. The first generation is longer and may need slightly more patterned film.

Are the sliding doors of a Trans Sport wrapped?

Yes, the sliding doors of a Trans Sport are wrapped along with the rest of the body. The door tracks stay bare, and the film is cut along them so the doors can still slide. That leaves the track area unpainted and the film edge neat. The cut line is one of the first things an installer plans on this van.

Can I wrap only the hood or the roof of a Trans Sport?

Yes, you can wrap only the hood or the roof of a Trans Sport. The partial wrap options for this van are the roof, the hood, and the mirror caps. These jobs use far less film than the full 70 ft (21.5 m) estimate. A chrome delete or front-end paint protection film is also a smaller job.

Is a Trans Sport hard to wrap?

A Trans Sport is not hard to wrap for an experienced installer, but its size and sliding doors add work. The van is over 187 in (4,757 mm) long, so handling the panels takes two people. The sliding door tracks stay bare and the film is cut along them, which needs precise knifeless work. The many trims and the tall sides add labor time.