Wraps by car

Pontiac Vibe wrap

The Pontiac Vibe wrap page covers both generations of this compact hatchback. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. The Vibe is a five-door minivan-class vehicle that was produced from 2002 to 2010.

2generations17 mof film for a full wrap

Pontiac Vibe, second generation, factory photo
Pontiac Vibe, second generation. Factory color shown.

Pontiac Vibe wrap colors and ideas

  • Vibe black wrap
  • Vibe white wrap
  • Vibe gray wrap
  • Vibe silver wrap
  • Vibe red wrap
  • Vibe blue wrap
  • Vibe green wrap
  • Vibe yellow wrap
  • Vibe orange wrap
  • Vibe purple wrap
  • Vibe pink wrap
  • Vibe teal wrap
  • Vibe brown wrap
  • Vibe gold wrap
  • Vibe chrome wrap
  • Vibe color shift wrap
  • Vibe carbon fiber wrap
  • Vibe camo and patterned wrap

How much vinyl to wrap a Pontiac Vibe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2010hatchback (5 doors)171.9 in (4,366 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2002–2008hatchback (5 doors)171.9 in (4,365 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Vibe wrap cost factors

Vibe wrap cost depends on the amount of film, the film type, and the labor for the size of the car. The Vibe needs about 56 ft (17 m) of cast film for a full wrap, or 66 ft (20 m) for chrome or patterned film. The tailgate with integrated glass adds some cutting time as well.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vibe wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Vibe, second generation, factory photo
Factory color shown

2008–2010 Vibe hatchback (second generation)

2008–2010hatchback (5 doors)171.9 in (4,366 mm)

The second generation Pontiac Vibe from 2008 to 2010 is a five-door hatchback. Paint age is a real factor on a car of these years, because panels may be original or repainted. A test spot should be done before a full wrap to check adhesion and paint condition.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Pontiac Vibe, first generation, factory photo
Factory color shown

2002–2008 Vibe hatchback (first generation)

2002–2008hatchback (5 doors)171.9 in (4,365 mm)

The first generation Pontiac Vibe from 2002 to 2008 includes a restyling in 2004. Bumpers and lights changed with that restyling, so film cut for one version does not fit the other. For a full wrap, use patterns that match the specific front and rear design of your Vibe.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Vibe

A partial wrap on a Pontiac Vibe can cover the roof, hood, and mirror caps. Vibe chrome delete involves covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Vibe: body, cut-outs and film

The Pontiac Vibe vinyl wrap is shaped by its single hatchback body style with five doors. The car measures 171.9 in (4,366 mm) long on the second generation and 171.9 in (4,365 mm) on the first. A wrap installer must cover the roof, hood, sides, and tailgate while leaving the glass areas clear.

Vibe wrap ideas include handling the tailgate with the rear glass in it. The film ends at the edge of the glass so the tailgate needs careful cutting around that area. No other parts require removal or cut-outs for a standard color change wrap.

How much vinyl to wrap a Vibe depends on the generation, but the film estimate is the same for both. The first generation from 2002 to 2008 and the second from 2008 to 2010 each need about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m).

Questions about wrapping a Pontiac Vibe

How much vinyl does it take to wrap a Pontiac Vibe?

A full vinyl wrap of a Pontiac Vibe takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the amount goes up to about 66 ft (20 m).

Can I wrap only the hood or the roof of a Vibe?

Yes, you can wrap only the hood or the roof of a Vibe. A partial wrap commonly includes the roof, hood, and mirror caps, but you can choose just one panel.

Is a Vibe hard to wrap?

A Vibe is not especially hard to wrap, but the tailgate with rear glass in it adds a bit of work. The film must end at the edge of the glass, so that area needs careful trimming.

How many generations of the Vibe does this page cover?

This page covers two generations of the Pontiac Vibe. The first generation ran from 2002 to 2008, and the second from 2008 to 2010.