Wraps by car

Pontiac Montana wrap

The Pontiac Montana wrap page covers the two generations of this minivan. A full wrap of the newest 2005–2009 body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast vinyl wrap film. Chrome or patterned film on that generation needs about 87 ft (26.5 m).

2generations23.5 mof film for a full wrap

Pontiac Montana, second generation, factory photo
Pontiac Montana, second generation. Factory color shown.

Pontiac Montana wrap colors and ideas

  • Montana black wrap
  • Montana white wrap
  • Montana gray wrap
  • Montana silver wrap
  • Montana red wrap
  • Montana blue wrap
  • Montana green wrap
  • Montana yellow wrap
  • Montana orange wrap
  • Montana purple wrap
  • Montana pink wrap
  • Montana teal wrap
  • Montana brown wrap
  • Montana gold wrap
  • Montana chrome wrap
  • Montana color shift wrap
  • Montana carbon fiber wrap
  • Montana camo and patterned wrap

How much vinyl to wrap a Pontiac Montana

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2009van (5 doors)204.0 in (5,182 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1997–2005van (5 doors)187.3 in (4,757 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Montana wrap cost factors

A Montana wrap cost depends on the size of the 5-door van body and the film choice. The second generation is 204.0 in (5,182 mm) long and needs more material than the 187.3 in (4,757 mm) first generation. Chrome or patterned film adds work because it requires about 87 ft (26.5 m) on the newer van. Paint condition also matters, as a repainted panel may need more prep.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Montana wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Montana, second generation, factory photo
Factory color shown

2005–2009 Montana van (second generation)

2005–2009van (5 doors)204.0 in (5,182 mm)

The 2005–2009 Pontiac Montana is a 5-door van with sliding side doors. The door tracks stay bare when the vinyl wrap is applied. The installer cuts the film along those tracks for a clean edge. This body is 204.0 in (5,182 mm) long and stands 72.0 in (1,830 mm) tall.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (72.0 in (1,830 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Pontiac Montana, first generation, factory photo
Factory color shown

1997–2005 Montana van (first generation)

1997–2005van (5 doors)187.3 in (4,757 mm)

The 1997–2005 Pontiac Montana is a 5-door van from the first generation. On a car of these years, panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion. This body is 187.3 in (4,757 mm) long.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Montana

A partial wrap on a Pontiac Montana can cover the roof, hood, or mirror caps. Montana chrome delete is the bright trim covered with black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Montana: body, cut-outs and film

A Pontiac Montana vinyl wrap is sized by its single 5-door van body style. The second generation from 2005–2009 is 204.0 in (5,182 mm) long, so the wrap uses more film than the earlier van. The first generation from 1997–2005 is 187.3 in (4,757 mm) long and takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

Montana wrap ideas have to work around the sliding side doors. The door tracks stay bare and the film is cut along them on both generations. The second generation has a tall body at 72.0 in (1,830 mm), so the roof is wrapped from a platform.

How much vinyl to wrap a Montana changes by generation. The 2005–2009 van takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film for a full wrap. The 1997–2005 van needs about 70 ft (21.5 m) of the same film. Chrome or patterned film on the older van runs about 82 ft (25 m).

Questions about wrapping a Pontiac Montana

How much vinyl does it take to wrap a Pontiac Montana?

Yes, a full wrap on the newest Pontiac Montana takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. That figure is for the 2005–2009 van body. Chrome or patterned film on that generation needs about 87 ft (26.5 m).

Are the sliding doors of a Montana wrapped?

Yes, the sliding doors of a Pontiac Montana are wrapped. The door tracks stay bare and the film is cut along them. This applies to both the 1997–2005 and 2005–2009 generations.

Can I wrap only the hood or the roof of a Montana?

Yes, you can wrap only the hood or the roof of a Pontiac Montana. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete is another option for the window trim and badges.

Is a Montana hard to wrap?

A Pontiac Montana is not unusually hard to wrap, but it has some work points. The sliding door tracks need careful cutting to stay bare. The second generation has a tall body at 72.0 in (1,830 mm), so the roof is wrapped from a platform. The long body of 204.0 in (5,182 mm) uses more film.