Wraps by car

Pontiac Phoenix wrap

The Pontiac Phoenix wrap page covers the two generations of the compact Phoenix coupe and the full vinyl wrap for its newest body. A complete color change on the second-generation car takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the coupe. The hatchback body needs up to 51 ft (15.5 m) of the same film. Both generations share the Phoenix name but differ in size and panel layout.

2generations15 mof film for a full wrap

Pontiac Phoenix, second generation, factory photo
Pontiac Phoenix, second generation. Factory color shown.

Pontiac Phoenix wrap colors and ideas

  • Phoenix black wrap
  • Phoenix white wrap
  • Phoenix gray wrap
  • Phoenix silver wrap
  • Phoenix red wrap
  • Phoenix blue wrap
  • Phoenix green wrap
  • Phoenix yellow wrap
  • Phoenix orange wrap
  • Phoenix purple wrap
  • Phoenix pink wrap
  • Phoenix teal wrap
  • Phoenix brown wrap
  • Phoenix gold wrap
  • Phoenix chrome wrap
  • Phoenix color shift wrap
  • Phoenix carbon fiber wrap
  • Phoenix camo and patterned wrap

How much vinyl to wrap a Pontiac Phoenix

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1984coupe, hatchback (2 or 5 doors)176.7 in (4,488 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1977–1979coupe, sedan (2 or 4 doors)203.4 in (5,166 mm)about 54 ft (16.5 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Phoenix wrap cost factors

The Phoenix wrap cost depends on the size of the car, the body style, and the film chosen. A first-generation Phoenix is longer and uses more film than the second-generation bodies. The coupe, hatchback, and sedan each have different panel counts and film amounts. Chrome or patterned film adds material and labor compared to a standard color change.

  • Film for a full wrap: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, hatchback (2 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Phoenix wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Phoenix, second generation, factory photo
Factory color shown

1979–1984 Phoenix coupe, hatchback (second generation)

1979–1984coupe, hatchback (2 or 5 doors)176.7 in (4,488 mm)

The second-generation Phoenix comes as a coupe or a hatchback, and the style decides the panel plan and the film amount. The coupe uses about 49 ft (15 m) of 60-inch cast film, while the hatchback uses about 51 ft (15.5 m). The hatchback's tailgate with integrated glass requires careful trimming around the window edge. A wrap installer counts the panels and the tailgate when estimating film for either style.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Pontiac Phoenix, first generation, factory photo
Factory color shown

1977–1979 Phoenix coupe, sedan (first generation)

1977–1979coupe, sedan (2 or 4 doors)203.4 in (5,166 mm)

On a first-generation Phoenix, paint age matters because the car was built from 1977 to 1979. Panels may be original or repainted, and a test spot comes before a full wrap. The film can react differently to aged or repainted surfaces, so adhesion is checked first. This step helps avoid lifting or damage when the wrap is removed.

Film: about 54 ft (16.5 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Phoenix

A partial wrap on a Phoenix can cover the roof, hood, or mirror caps as separate jobs. Chrome delete is another option: the window trim and badges are covered with black film. Paint protection film (PPF) in clear is applied to the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Phoenix: body, cut-outs and film

A Pontiac Phoenix vinyl wrap job is shaped by the body style and the car's compact dimensions. The second-generation coupe measures 176.7 in (4,488 mm) long, and its wrap uses about 49 ft (15 m) of film. The hatchback adds more surface area and calls for 51 ft (15.5 m). The first-generation Phoenix is notably longer at 203.4 in (5,166 mm), so its wrap uses 54 ft (16.5 m) for the coupe and 57 ft (17.5 m) for the sedan.

Phoenix wrap ideas often start with removing or working around certain parts before film goes on. The second-generation hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Door handles, mirrors, and trim pieces are removed where possible to allow clean edges. Badges are taken off and reapplied after the wrap.

To know how much vinyl to wrap a Phoenix, compare the two generations and their body styles. The second-generation coupe needs about 49 ft (15 m) of 60-inch film, while the hatchback needs 51 ft (15.5 m). On the first-generation car, the coupe takes about 54 ft (16.5 m) and the sedan takes 57 ft (17.5 m). If the wrap includes chrome or a patterned film, add up to 15 ft (4.5 m) more material.

Questions about wrapping a Pontiac Phoenix

How much vinyl does it take to wrap a Pontiac Phoenix?

A Pontiac Phoenix takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap the second-generation coupe. The hatchback version of that generation needs about 51 ft (15.5 m) of the same film. These figures are for a full color change with standard cast film.

Which Phoenix body takes more film?

The first-generation Phoenix sedan takes more film than any other Phoenix body. It uses about 57 ft (17.5 m) of 60-inch cast film, while the first-generation coupe uses about 54 ft (16.5 m). The second-generation bodies are smaller: the coupe needs about 49 ft (15 m) and the hatchback about 51 ft (15.5 m).

Can I wrap only the hood or the roof of a Phoenix?

Yes, you can wrap only the hood or the roof of a Phoenix as a partial wrap. The hood is a single large panel that can be done in one piece. The roof is also straightforward, and mirror caps can be wrapped separately. These partial jobs use less film than a full color change.

Is a Phoenix hard to wrap?

A Phoenix is not especially hard to wrap, but the second-generation hatchback adds work because the film must end at the edge of the rear glass in the tailgate. The first-generation Phoenix is longer at 203.4 in (5,166 mm), so its larger panels take more time to position and trim. Standard coupe and sedan bodies are straightforward for a wrap installer.