Wraps by car

Pontiac Catalina wrap

The Pontiac Catalina wrap page covers all five generations from 1959 to 1981, with a full vinyl wrap of the newest body taking about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan.

5generations20 mof film for a full wrap

Pontiac Catalina, fifth generation, factory photo
Pontiac Catalina, fifth generation. Factory color shown.

Pontiac Catalina wrap colors and ideas

  • Catalina black wrap
  • Catalina white wrap
  • Catalina gray wrap
  • Catalina silver wrap
  • Catalina red wrap
  • Catalina blue wrap
  • Catalina green wrap
  • Catalina yellow wrap
  • Catalina orange wrap
  • Catalina purple wrap
  • Catalina pink wrap
  • Catalina teal wrap
  • Catalina brown wrap
  • Catalina gold wrap
  • Catalina chrome wrap
  • Catalina color shift wrap
  • Catalina carbon fiber wrap
  • Catalina camo and patterned wrap

How much vinyl to wrap a Pontiac Catalina

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1977–1981coupe, sedan (2 or 4 doors)212.6 in (5,400 mm)about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1971–1976coupe, sedan, wagon (2 or 4 or 5 doors)214.6 in (5,450 mm)about 59 ft (18 m) for the coupe to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1965–1970convertible, coupe, sedan, wagon (2 or 4 or 5 doors)214.6 in (5,451 mm)about 57 ft (17.5 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1961–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)210.0 in (5,334 mm)about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m)
1959–1960convertible, coupe, sedan, wagon (2 or 4 or 5 doors)213.7 in (5,428 mm)about 59 ft (18 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m)

Catalina wrap cost factors

What a Catalina wrap cost depends on has no single answer because the film amount changes with the body style and the generation. A fifth generation coupe takes about 57 ft (17.5 m) of cast film while a first generation wagon takes about 67 ft (20.5 m), and chrome or patterned film can raise the total to about 85 ft (26 m). The number of pieces, the cut-outs and the paint condition also change the labor, so the final number is set per car.

  • Film for a full wrap: about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).
  • Body: coupe, sedan (2 or 4 doors).

Catalina wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Catalina, fifth generation, factory photo
Factory color shown

1977–1981 Catalina coupe, sedan (fifth generation)

1977–1981coupe, sedan (2 or 4 doors)212.6 in (5,400 mm)

The fifth generation Pontiac Catalina from 1977 to 1981 came as a coupe or a sedan, and the style decides the panel plan and the film amount. The coupe measures 212.6 in (5,400 mm) and takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the sedan takes up to 66 ft (20 m). A wrap on this body has large flat panels on the hood, roof and quarters, but the extra doors on the sedan add seams and more film.

Film: about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Pontiac Catalina, fourth generation, factory photo
Factory color shown

1971–1976 Catalina coupe, sedan, wagon (fourth generation)

1971–1976coupe, sedan, wagon (2 or 4 or 5 doors)214.6 in (5,450 mm)

On a fourth generation Catalina from 1971 to 1976 the paint age is a key concern because panels may be original or repainted after years on the road. A test spot is placed on each panel before a full wrap, and any loose or cracked paint is corrected first. The body measures 214.6 in (5,450 mm), and the film amount runs from about 59 ft (18 m) for the coupe to 67 ft (20.5 m) for the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) for the coupe to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Pontiac Catalina, third generation, factory photo
Factory color shown

1965–1970 Catalina convertible, coupe, sedan, wagon (third generation)

1965–1970convertible, coupe, sedan, wagon (2 or 4 or 5 doors)214.6 in (5,451 mm)

On a third generation Catalina from 1965 to 1970 the open top does not take vinyl because a fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own, so the convertible needs about 57 ft (17.5 m) of cast film. The wagon and sedan need more film, up to about 67 ft (20.5 m), and a tailgate with the rear glass in it has the film end at the edge of the glass.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Pontiac Catalina, second generation, factory photo
Factory color shown

1961–1964 Catalina convertible, coupe, sedan, wagon (second generation)

1961–1964convertible, coupe, sedan, wagon (2 or 4 or 5 doors)210.0 in (5,334 mm)

A second generation Catalina from 1961 to 1964 is 210.0 in (5,334 mm) long, and the body style sets the amount of film and the number of panels. The convertible takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, the wagon takes about 66 ft (20 m), and chrome or patterned film can reach about 84 ft (25.5 m). The two-door cars have fewer door seams, but the wagon adds a tailgate and longer roof sections.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the convertible to 66 ft (20 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 84 ft (25.5 m).

Pontiac Catalina, first generation, factory photo
Factory color shown

1959–1960 Catalina convertible, coupe, sedan, wagon (first generation)

1959–1960convertible, coupe, sedan, wagon (2 or 4 or 5 doors)213.7 in (5,428 mm)

A first generation Catalina from 1959 to 1960 is 213.7 in (5,428 mm) long, and the body style sets the amount of film and the number of panels. The convertible takes about 59 ft (18 m) of cast film, the wagon takes about 67 ft (20.5 m), and chrome or patterned film can reach about 85 ft (26 m). The fins and sharp body lines on this car need more relief cuts and careful stretching, which adds panels compared with later years.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) for the convertible to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Catalina

A partial wrap on a Pontiac Catalina can cover the roof, the hood or the mirror caps as separate pieces with clean edges. Catalina chrome delete is done with black film on the window trim and badges, and it works on any generation without changing the main body color. Paint protection film in clear is another option for the front end, on the bumper, the hood edge and the fender tips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Catalina: body, cut-outs and film

A Pontiac Catalina vinyl wrap follows the body style closely because the coupe and sedan have different panel counts and lengths. The fifth generation coupe needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, while the sedan needs up to 66 ft (20 m). Extra length appears on the roof, the doors and the rear quarters, so the sedan takes more pieces and more time.

Catalina wrap ideas include chrome or patterned film, which can raise the total to about 79 ft (24 m) on the newest body because bright trim and accents are wrapped as separate pieces. Door handles, mirrors, antennas and badges are removed or cut around on every generation. A tailgate with the rear glass in it appears on many wagons, and the film ends at the edge of the glass.

To find how much vinyl to wrap a Catalina you compare the body styles and the extra work in each generation. A 1965–1970 wagon needs about 67 ft (20.5 m) of cast film, while a 1961–1964 convertible needs only about 56 ft (17 m). Chrome or patterned film adds up to about 84 ft (25.5 m) on the longest bodies, so the film order changes with the year and the top.

Questions about wrapping a Pontiac Catalina

How much vinyl does it take to wrap a Pontiac Catalina?

A full wrap of the newest Pontiac Catalina takes about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, using 60-inch (1.52 m) cast film. The exact amount depends on the body style, the number of doors and whether chrome or patterned film is added.

Which Catalina body takes more film?

The wagons take more film than the coupes, sedans or convertibles in every Catalina generation. A fifth generation sedan needs up to 66 ft (20 m) while the coupe needs about 57 ft (17.5 m), and a fourth generation wagon needs about 67 ft (20.5 m) compared with 59 ft (18 m) for the coupe.

Can I wrap only the hood or the roof of a Catalina?

Yes, a Catalina can be wrapped only on the hood, the roof or the mirror caps as a partial wrap. Chrome delete on the window trim and badges is another smaller job, and clear paint protection film can be applied to just the front end.

Is a Catalina hard to wrap?

A Catalina is more work to wrap than a smaller car because the bodies are over 210 in (5,300 mm) long and have many separate panels. A tailgate with the rear glass in it needs the film trimmed exactly at the glass edge, and a convertible has a fabric top or a folding hard top that must be left unwrapped or wrapped as its own panels.