Wraps by car

Pontiac Firebird wrap

The Pontiac Firebird wrap page covers all four generations of this car, from 1967 to 2002. A full vinyl wrap of the newest fourth-generation body takes about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe.

4generations16 mof film for a full wrap

Pontiac Firebird, fourth generation, factory photo
Pontiac Firebird, fourth generation. Factory color shown.

Pontiac Firebird wrap colors and ideas

  • Firebird black wrap
  • Firebird white wrap
  • Firebird gray wrap
  • Firebird silver wrap
  • Firebird red wrap
  • Firebird blue wrap
  • Firebird green wrap
  • Firebird yellow wrap
  • Firebird orange wrap
  • Firebird purple wrap
  • Firebird pink wrap
  • Firebird teal wrap
  • Firebird brown wrap
  • Firebird gold wrap
  • Firebird chrome wrap
  • Firebird color shift wrap
  • Firebird carbon fiber wrap
  • Firebird camo and patterned wrap

How much vinyl to wrap a Pontiac Firebird

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2002convertible, coupe (2 doors)193.7 in (4,920 mm)about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1982–1992convertible, coupe (2 doors)190.5 in (4,839 mm) to 190.6 in (4,841 mm)about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1970–1981coupe (2 doors)191.6 in (4,867 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1967–1969convertible, coupe (2 doors)188.8 in (4,796 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Firebird wrap cost factors

The Firebird wrap cost depends on the body style, the generation, and the film type. A full wrap of a fourth-generation coupe uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. A convertible uses slightly less film, and chrome or patterned film can add up to about 61 ft (18.5 m) to the estimate.

  • Film for a full wrap: about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Firebird wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Firebird, fourth generation, factory photo
Factory color shown

1993–2002 Firebird convertible, coupe (fourth generation)

1993–2002convertible, coupe (2 doors)193.7 in (4,920 mm)

On the fourth-generation Pontiac Firebird, the open top is handled differently by top type. A fabric convertible top is not wrapped, and the vinyl film ends where the fabric begins. A folding hard top is wrapped as panels of its own, so the film is cut to match each panel.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Pontiac Firebird, third generation, factory photo
Factory color shown

1982–1992 Firebird convertible, coupe (third generation)

1982–1992convertible, coupe (2 doors)190.5 in (4,839 mm) to 190.6 in (4,841 mm)

The third-generation Pontiac Firebird came as a convertible and a coupe. The body style decides the panel plan and the film amount, with the coupe needing about 52 ft (16 m) and the convertible about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Pontiac Firebird, second generation, factory photo
Factory color shown

1970–1981 Firebird coupe (second generation)

1970–1981coupe (2 doors)191.6 in (4,867 mm)

Paint age matters on a second-generation Pontiac Firebird from 1970 to 1981. Panels may be original or repainted, and a test spot of vinyl film on the paint comes before a full wrap. This checks that the film will adhere and remove safely from the old finish.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Pontiac Firebird, first generation, factory photo
Factory color shown

1967–1969 Firebird convertible, coupe (first generation)

1967–1969convertible, coupe (2 doors)188.8 in (4,796 mm)

The first-generation Pontiac Firebird is 188.8 in (4,796 mm) long in both convertible and coupe forms. A full wrap takes about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe of 60-inch (1.52 m) cast film. The two long side doors are each wrapped as one large piece of film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Firebird

For a smaller job on a Pontiac Firebird, a partial wrap covers the roof, hood, or mirror caps. A Firebird chrome delete covers window trim and badges with black film. Paint protection film (PPF) is also an option as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Firebird: body, cut-outs and film

The Pontiac Firebird vinyl wrap is shaped by the car's two body styles. The convertible and coupe both have two long doors, and each door is one large piece of film. The fourth generation runs 193.7 in (4,920 mm), which is the longest body in this catalog.

Firebird wrap ideas include handling the long side doors as single large panels. A fabric convertible top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own, with the film cut to the panel edges.

How much vinyl to wrap a Firebird changes across the four generations. The third-generation coupe needs about 52 ft (16 m) of film, while the fourth-generation coupe needs about 54 ft (16.5 m). The first and second generations are close in size at 188.8 in (4,796 mm) and 191.6 in (4,867 mm).

Questions about wrapping a Pontiac Firebird

How much vinyl does it take to wrap a Pontiac Firebird?

Yes, a full wrap of a Pontiac Firebird takes about 52 ft (16 m) to 54 ft (16.5 m) of 60-inch (1.52 m) film depending on body style. The fourth-generation convertible needs about 52 ft (16 m) and the coupe about 54 ft (16.5 m). Chrome or patterned film can add up to about 61 ft (18.5 m).

Is the top of a Firebird wrapped?

The top of a Firebird is not wrapped if it is a fabric convertible top. The film ends where the fabric begins on those models. A folding hard top is wrapped as panels of its own.

Which Firebird body takes more film?

The coupe body of a Firebird generally takes more film than the convertible in the same generation. For the fourth generation, the coupe is about 54 ft (16.5 m) and the convertible about 52 ft (16 m). For the third generation, the coupe is about 52 ft (16 m) and the convertible about 44 ft (13.5 m).

Can I wrap only the hood or the roof of a Firebird?

Yes, you can wrap only the hood or the roof of a Firebird. Partial wrap options include the roof, hood, and mirror caps. These smaller vinyl applications cover one panel or a selected area instead of the whole car.