Wraps by car

Pontiac Parisienne wrap

The Pontiac Parisienne wrap page covers the full-size sedan produced from 1971 to 1986. This single generation is the only body style offered, a four-door sedan measuring 212.1 in (5,387 mm) long. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Pontiac Parisienne, first generation, factory photo
Pontiac Parisienne, first generation. Factory color shown.

Pontiac Parisienne wrap colors and ideas

  • Parisienne black wrap
  • Parisienne white wrap
  • Parisienne gray wrap
  • Parisienne silver wrap
  • Parisienne red wrap
  • Parisienne blue wrap
  • Parisienne green wrap
  • Parisienne yellow wrap
  • Parisienne orange wrap
  • Parisienne purple wrap
  • Parisienne pink wrap
  • Parisienne teal wrap
  • Parisienne brown wrap
  • Parisienne gold wrap
  • Parisienne chrome wrap
  • Parisienne color shift wrap
  • Parisienne carbon fiber wrap
  • Parisienne camo and patterned wrap

How much vinyl to wrap a Pontiac Parisienne

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1986sedan (4 doors)212.1 in (5,387 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Parisienne wrap cost factors

Parisienne wrap cost depends mainly on the size of the car, with its 212.1 in (5,387 mm) length, and the film you choose. A full wrap in a solid color needs about 59 ft (18 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 74 ft (22.5 m). The amount of trim and the condition of the paint also affect the labor involved.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).

Parisienne wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Parisienne, first generation, factory photo
Factory color shown

1971–1986 Parisienne sedan (first generation)

1971–1986sedan (4 doors)212.1 in (5,387 mm)

The first-generation Pontiac Parisienne from 1971 to 1986 may have original or repainted panels after so many years. A test spot is necessary before a full wrap to check how the film adheres to the paint. If the paint is weak or flaking, the film will not stick properly and may pull paint off when removed.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Parisienne

A partial wrap on a Parisienne can cover the roof, hood, or mirror caps for a different look without doing the whole car. A chrome delete on the window trim and badges is a smaller job that changes the car's appearance. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips and scratches.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Parisienne: body, cut-outs and film

A Pontiac Parisienne vinyl wrap on this full-size four-door sedan means large, mostly flat panels that are straightforward to cover. The 212.1 in (5,387 mm) overall length adds surface area, so full wraps need more film than on a smaller car. The single body style keeps the job predictable because there are no other shapes to account for.

Parisienne wrap ideas often start with a color change, but the installer must handle several cut-outs. Door handles, mirrors, badges, and trim all need precise trimming or temporary removal for a clean result. The chrome trim around the windows is a good candidate for chrome delete, which is bright trim covered with black film.

When you count how much vinyl to wrap a Parisienne, the answer stays the same across all years of this generation. The sedan body was the only style offered from 1971 to 1986, and its dimensions did not change enough to alter the film estimate. A full wrap requires about 59 ft (18 m) of 60-inch (1.52 m) cast film, while chrome or patterned film needs about 74 ft (22.5 m).

Questions about wrapping a Pontiac Parisienne

How much vinyl does it take to wrap a Pontiac Parisienne?

About 59 ft (18 m) of 60-inch (1.52 m) cast film is needed to wrap a Pontiac Parisienne in a solid color. For chrome or patterned film, the estimate rises to about 74 ft (22.5 m). These figures are for the full-size four-door sedan body made from 1971 to 1986.

Can I wrap only the hood or the roof of a Parisienne?

Yes, you can wrap only the hood or the roof of a Parisienne. Partial wrap options include the hood, roof, and mirror caps. A chrome delete on the window trim and badges is also a smaller job than a full wrap.

Is a Parisienne hard to wrap?

A Parisienne is not especially hard to wrap, but its full-size body adds work. The 212.1 in (5,387 mm) length means more film and more time to cover all panels. The chrome trim and many cut-outs around doors and windows require careful trimming and some removal.

How many generations of the Parisienne does this page cover?

This page covers one generation of the Pontiac Parisienne, produced from 1971 to 1986. That generation is the only one in the catalog for this model.