Wraps by car

Pontiac LeMans wrap

This page covers the Pontiac LeMans across its six generations and the vinyl wrap film a full wrap of the newest body takes. The sixth-generation LeMans from 1988 to 1993 needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the hatchback. A sedan from the same generation takes about 49 ft (15 m) of the same material.

6generations14.5 mof film for a full wrap

Pontiac LeMans, sixth generation, factory photo
Pontiac LeMans, sixth generation. Factory color shown.

Pontiac LeMans wrap colors and ideas

  • LeMans black wrap
  • LeMans white wrap
  • LeMans gray wrap
  • LeMans silver wrap
  • LeMans red wrap
  • LeMans blue wrap
  • LeMans green wrap
  • LeMans yellow wrap
  • LeMans orange wrap
  • LeMans purple wrap
  • LeMans pink wrap
  • LeMans teal wrap
  • LeMans brown wrap
  • LeMans gold wrap
  • LeMans chrome wrap
  • LeMans color shift wrap
  • LeMans carbon fiber wrap
  • LeMans camo and patterned wrap

How much vinyl to wrap a Pontiac LeMans

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1993hatchback, sedan (3 or 4 doors)163.7 in (4,158 mm) to 177.0 in (4,495 mm)about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1978–1981coupe, sedan, wagon (2 or 4 or 5 doors)200.8 in (5,100 mm)about 56 ft (17 m) for the coupe to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)
1973–1977coupe, sedan, wagon (2 or 4 or 5 doors)212.6 in (5,400 mm)about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
1968–1972convertible, coupe, sedan (2 or 4 doors)207.2 in (5,263 mm)about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1964–1967convertible, coupe, sedan (2 doors)206.7 in (5,250 mm)about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1962–1963convertible, coupe (2 doors)——

LeMans wrap cost factors

LeMans wrap cost depends on the generation, the body style, and the film used. A larger body like the fourth-generation sedan at 212.6 in (5,400 mm) takes more material than a sixth-generation hatchback. The choice of chrome or patterned film adds up to about 23% more film on the fifth generation compared to standard cast film. Labor also changes with the panel count, so a wagon with more doors costs more in time than a coupe.

  • Film for a full wrap: about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan (3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1991: bumpers and lights differ between the versions, and so do the film cuts.

LeMans wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac LeMans, sixth generation, factory photo
Factory color shown

1988–1993 LeMans hatchback, sedan (sixth generation)

1988–1993hatchback, sedan (3 or 4 doors)163.7 in (4,158 mm) to 177.0 in (4,495 mm)

The sixth-generation Pontiac LeMans was restyled in 1991 with new bumpers and lights. Because the bumpers and lights changed, film cut for a 1988 to 1990 car does not fit a 1991 to 1993 car. Installers need to know the exact production year before cutting the film for the front or rear ends. The hatchback and sedan bodies of this generation each use a different amount of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the hatchback to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Pontiac LeMans, fifth generation, factory photo
Factory color shown

1978–1981 LeMans coupe, sedan, wagon (fifth generation)

1978–1981coupe, sedan, wagon (2 or 4 or 5 doors)200.8 in (5,100 mm)

The fifth-generation Pontiac LeMans from 1978 to 1981 came as a coupe, sedan, or wagon. The body style decides the panel plan and the film amount, with the wagon taking up to 62 ft (19 m) of 60-inch (1.52 m) cast film. A coupe of the same generation takes about 56 ft (17 m). The tailgate design on all three styles keeps the film from covering the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the coupe to 62 ft (19 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Pontiac LeMans, fourth generation, factory photo
Factory color shown

1973–1977 LeMans coupe, sedan, wagon (fourth generation)

1973–1977coupe, sedan, wagon (2 or 4 or 5 doors)212.6 in (5,400 mm)

The fourth-generation Pontiac LeMans from 1973 to 1977 may have original or repainted panels after many years. Paint age matters because older paint can fail under the film, and a test spot comes before a full wrap. An installer will check the paint condition on a small area before covering the whole car. This generation includes coupe, sedan, and wagon bodies, with the sedan taking up to 66 ft (20 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) for the coupe to 66 ft (20 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Pontiac LeMans, third generation, factory photo
Factory color shown

1968–1972 LeMans convertible, coupe, sedan (third generation)

1968–1972convertible, coupe, sedan (2 or 4 doors)207.2 in (5,263 mm)

The third-generation Pontiac LeMans from 1968 to 1972 offered a convertible body. On a convertible, a fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own, separate from the body panels. The film estimate for a convertible is about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Pontiac LeMans, second generation, factory photo
Factory color shown

1964–1967 LeMans convertible, coupe, sedan (second generation)

1964–1967convertible, coupe, sedan (2 doors)206.7 in (5,250 mm)

The second-generation Pontiac LeMans from 1964 to 1967 is a compact car with two long side doors. Each door is one large piece of film, so the panel plan has fewer seams but larger sheets. The convertible takes about 56 ft (17 m) of film, while the sedan takes about 64 ft (19.5 m). The body length of 206.7 in (5,250 mm) places this generation in the middle of the six for size.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 56 ft (17 m) for the convertible to 64 ft (19.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Pontiac LeMans, first generation, factory photo
Factory color shown

1962–1963 LeMans convertible, coupe (first generation)

1962–1963convertible, coupe (2 doors)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Roof, hood, chrome delete and PPF on a LeMans

Partial wrap jobs on a Pontiac LeMans cover the roof, hood, or mirror caps only. LeMans chrome delete covers window trim and badges with black film to change the brightwork look. Paint protection film on the front end is a clear option that wraps the hood edge, fenders, and bumper. These smaller jobs use far less film than a full body wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac LeMans: body, cut-outs and film

The Pontiac LeMans vinyl wrap plan depends on the body style and the size of the car. The longest body is the fourth-generation model at 212.6 in (5,400 mm), and wagon versions generally need more film than coupes. The sixth generation is shorter, between 163.7 in (4,158 mm) and 177.0 in (4,495 mm), and its hatchback and sedan bodies wrap with less material. Door count also matters, as each door is a full panel of film.

LeMans wrap ideas include handling the tailgate with care on the 1973 to 1993 bodies. The rear glass is set into the tailgate, so the film ends at the edge of the glass and the glass itself stays bare. On the 1978 to 1981 fifth generation the same tailgate design appears on coupe, sedan, and wagon styles. Chrome or patterned film will also add material to the estimate on many of these bodies.

How much vinyl to wrap a LeMans changes with the generation because the bodies are not all the same size. The fifth generation from 1978 to 1981 takes about 56 ft (17 m) for a coupe and up to 62 ft (19 m) for a wagon. The fourth generation from 1973 to 1977 takes about 57 ft (17.5 m) for a coupe and up to 66 ft (20 m) for a sedan. A 1991 restyling on the sixth generation means even the same body style can use different film patterns on either side of that year.

Questions about wrapping a Pontiac LeMans

How much vinyl does it take to wrap a Pontiac LeMans?

A full wrap of the newest Pontiac LeMans takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for the hatchback, and about 49 ft (15 m) for the sedan. Chrome or patterned film can bring the total up to about 62 ft (19 m) on the sixth generation.

Which years of the LeMans take the same film cuts?

The same film cuts fit the LeMans from 1988 to 1990, and different cuts fit the 1991 to 1993 models after the restyling. The fifth generation from 1978 to 1981 and the fourth generation from 1973 to 1977 each have their own film patterns due to body changes.

Which LeMans body takes more film?

The wagon body of the LeMans takes more film than the coupe or sedan in the same generation. In the fifth generation from 1978 to 1981, the wagon takes up to 62 ft (19 m) of film, while the coupe takes about 56 ft (17 m).

Can I wrap only the hood or the roof of a LeMans?

Yes, you can wrap only the hood or the roof of a LeMans as a partial wrap. A partial wrap can include the roof, hood, or mirror caps, or a chrome delete on window trim and badges. Paint protection film on the front end is another smaller option that does not require a full wrap.