Wraps by car

Pontiac Tempest wrap

This page covers the Pontiac Tempest and its three generations, from the first cars of 1961 through the final 1991 sedan. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The body styles range from a compact wagon to a convertible and a two-door coupe. Use the generation sections to check how film amounts change between the designs.

3generations15.5 mof film for a full wrap

Pontiac Tempest, third generation, factory photo
Pontiac Tempest, third generation. Factory color shown.

Pontiac Tempest wrap colors and ideas

  • Tempest black wrap
  • Tempest white wrap
  • Tempest gray wrap
  • Tempest silver wrap
  • Tempest red wrap
  • Tempest blue wrap
  • Tempest green wrap
  • Tempest yellow wrap
  • Tempest orange wrap
  • Tempest purple wrap
  • Tempest pink wrap
  • Tempest teal wrap
  • Tempest brown wrap
  • Tempest gold wrap
  • Tempest chrome wrap
  • Tempest color shift wrap
  • Tempest carbon fiber wrap
  • Tempest camo and patterned wrap

How much vinyl to wrap a Pontiac Tempest

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1991sedan (4 doors)183.4 in (4,658 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1964–1970coupe, sedan (2 or 4 doors)200.7 in (5,098 mm) to 204.7 in (5,199 mm)about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
1961–1963convertible, coupe, sedan, wagon (2 or 4 or 5 doors)189.3 in (4,808 mm)about 51 ft (15.5 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Tempest wrap cost factors

The Tempest wrap cost depends on the body style, the amount of film, and the work in the panel plan. A wagon or a four-door sedan has more flat panels than a coupe or convertible, which raises the film amount. The first-generation wagon needs about 59 ft (18 m) of cast film, while the third-generation sedan needs about 51 ft (15.5 m). Cut-outs around a folding hard top or a tailgate glass add labor time. The final figure also changes with the film type, finish, and how much disassembly each generation requires.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Tempest wraps by generation

Swipe sideways. Tap a card for the full description.

Pontiac Tempest, third generation, factory photo
Factory color shown

1987–1991 Tempest sedan (third generation)

1987–1991sedan (4 doors)183.4 in (4,658 mm)

The third-generation Pontiac Tempest of 1987–1991 has a single four-door sedan body that is 183.4 in (4,658 mm) long. A full wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Paint age on a car of these years is a real point to check: panels may be original or repainted, and a test spot comes before a full wrap. The flat, simple shape means fewer complex curves, but the four doors and larger roof still count in the material estimate.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Pontiac Tempest, second generation, factory photo
Factory color shown

1964–1970 Tempest coupe, sedan (second generation)

1964–1970coupe, sedan (2 or 4 doors)200.7 in (5,098 mm) to 204.7 in (5,199 mm)

The second-generation Pontiac Tempest spans 1964–1970 and comes as a coupe or a sedan with two or four doors. The style you wrap decides the panel plan and the film amount: a coupe uses about 54 ft (16.5 m), while a sedan uses up to 56 ft (17 m). The body is longer than either other generation, at 200.7 in (5,098 mm) to 204.7 in (5,199 mm). A two-door coupe has longer doors and a wider rear quarter area, which changes how the vinyl is laid out in one piece.

Film: about 54 ft (16.5 m) for the coupe to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Pontiac Tempest, first generation, factory photo
Factory color shown

1961–1963 Tempest convertible, coupe, sedan, wagon (first generation)

1961–1963convertible, coupe, sedan, wagon (2 or 4 or 5 doors)189.3 in (4,808 mm)

The first-generation Pontiac Tempest of 1961–1963 offers the most body styles, including a convertible, coupe, sedan, and wagon. On the convertible body, the fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as its own panels, each piece cut and tucked separately. The wagon adds a tailgate where the wrap stops at the edge of the rear glass. These details make the first generation the most varied for a wrap installer.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the convertible to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Tempest

A partial wrap on a Pontiac Tempest can cover just the roof, hood, and mirror caps for a color change. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to protect the leading edges of the hood, fenders, and bumper. These jobs use less film than a full wrap and can be done without removing large panels. Each job still requires the same clean edges and disassembly around the part you wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Pontiac Tempest: body, cut-outs and film

The Pontiac Tempest vinyl wrap plan depends on the body style and size of each generation. The first-generation cars are 189.3 in (4,808 mm) long, while the second generation stretches to 200.7 in (5,098 mm) or 204.7 in (5,199 mm). The final generation is a single sedan body at 183.4 in (4,658 mm). Larger panels and longer roofs add to the amount of film for a full wrap.

Tempest wrap ideas start with the parts that need cut-outs or come off the car. On the first-generation convertible the fabric top is not wrapped, and the film ends where the top begins. If the car has a folding hard top, each panel of that top is wrapped as its own piece. A tailgate with glass in it is wrapped only up to the edge of the glass. Door handles, mirrors, and trim usually come off for a clean edge.

How much vinyl to wrap a Tempest changes by generation because the body sizes and styles change. The second generation uses about 54 ft (16.5 m) for a coupe and up to 56 ft (17 m) for a sedan. The first generation needs from about 51 ft (15.5 m) for a convertible to 59 ft (18 m) for a wagon. Chrome or patterned film needs more material to match the pattern across panels, up to about 74 ft (22.5 m) on the first generation.

Questions about wrapping a Pontiac Tempest

How much vinyl does it take to wrap a Pontiac Tempest?

Yes, a full wrap of the newest Pontiac Tempest takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The newest body is the third-generation sedan from 1987–1991. Chrome or patterned film would need more material because the pattern must line up. Older generations may need more or less film depending on the body style.

Can I wrap only the hood or the roof of a Tempest?

Yes, you can wrap only the hood or the roof of a Tempest as a partial wrap. A partial wrap can also cover mirror caps. A chrome delete is a separate job that covers window trim and badges with black film. Paint protection film is clear film on the front end, not a color change.

Is a Tempest hard to wrap?

Wrapping a Tempest has some extra work on certain body styles. A first-generation convertible has a fabric top you cannot wrap, and the film ends where the top begins. A tailgate with glass in it needs the film to end at the edge of the glass. The second-generation cars are longer, so you have more panel area to cover in one piece. These are not impossible, but they add time and care compared to a simple sedan.

How many generations of the Tempest does this page cover?

This page covers three generations of the Pontiac Tempest. They are the first generation from 1961–1963, the second from 1964–1970, and the third from 1987–1991. Each generation lists its body styles and film amount.